Opex Omation 306 Inital Setup Manual
Omation Model 306 Setup Manual Inital Machine Setup
Omation Model 306
Inital Setup Manual
03/09/2018 Condential OPEX Setup Manual - Corp. Use Only - Not for Distribution
Omation Model 306 Setup Manual Inital Machine Setup
*Tools and items required: Phillips screw driver and some type of padded material to lay on.
12
bottom
back
3
Unpack Tilt 35° Place on topLift from bottom
& back
Once the boxes are unpacked. Make sure that the top
and base of the Omation Model 306 are beside one
another on the ground. Engage the wheel brakes on
the base.
4
Then, with 2 people, tilt the top piece until the back
and the bottom of the top piece are at a 35° angle
from the oor. Place your hands underneath the back
and the bottom while squatting and then lift together with your legs.
Carefully walk the top piece over and hold it over the
base.
03/09/2018 Condential OPEX Setup Manual - Corp. Use Only - Not for Distribution
Loading...