Page 1
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
1
OpenVox Communication Co Ltd
IX160(P) Series Quick Start Guide
Version 1.0
Page 2
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
2
OpenVox Communication Co Ltd
Address: Room 624, 6/F, Tsinghua Information Port, Book Building, Qingxiang Road, Longhua Street, Longhua
District, Shenzhen, Guangdong, China 518109
Tel: +86-755-66630978, 82535461, 82535362
Business Contact: sales@openvox.cn
Technical Support: support@openvox.cn
Business Hours: 09:00-18:00(GMT+8) from Monday to Friday
URL: www.openvox.cn
Thank You for Choosing OpenVox Products!
Page 3
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
3
Confidentiality
Information contained herein is of a highly sensitive nature and is confidential and proprietary to
OpenVox Inc. No part may be distributed, reproduced or disclosed orally or in written form to any
party other than the direct recipients without the express written consent of OpenVox Inc.
Disclaimer
OpenVox Inc. reserves the right to modify the design, characteristics, and products at any time
without notification or obligation and shall not be held liable for any error or damage of any kind
resulting from the use of this document.
OpenVox has made every effort to ensure that the information contained in this document is
accurate and complete; however, the contents of this document are subject to revision without
notice. Please contact OpenVox to ensure you have the latest version of this document.
Trademarks
All other trademarks mentioned in this document are the property of their respective owners.
Page 4
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
4
Revise History
Version
Release Date
Description
1.0
03/11/2020
First Version
Page 5
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
5
Contents
1. Appearance ................................................................................................................................... 6
2. Hardware Installation ....................................................................................................................... 7
2.1 Telephony Card Installation .................................................................................................... 7
2.2 UPS Installation .................................................................................................................... 10
3. RAID Installation and Configuration ............................................................................................... 12
3.1 CSM compatible module Configuration ............................................................................... 12
3.2 Configure RAID mode ........................................................................................................... 13
3.3 Install System........................................................................................................................ 17
3.4 View Info .............................................................................................................................. 17
3.5 Troubleshooting method ...................................................................................................... 17
3.6 Notes for troubleshooting .................................................................................................... 18
4. Install System .................................................................................................................................. 19
Page 6
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
6
1. Appearance
Figure 1-1 IX160(P) front panel
Figure 1-2 IX160(P) back panel
The IX160/IX160P has two PCIe expansion slots and supports a combination of any two of the
following OpenVox telephony cards.
● A400E/A(E)810E/A(E)1610E/A(E)2410E
● B(E)200E/B(E)400E
● D(E)130E/D(E)230E/D(E)430E/D(E)830E/D(E)1630E
Except A400E, all compatible cards can be applied together with EC module.
Page 7
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
7
The IX160/IX160P provides two Gigabit Ethernet ports, one HDMI display port, two USB ports,
using 100-240V AC power supply, and can support optional RPS (Redundant Power Supply), UPS
(Uninterruptible Power Supply) and RAID hardware.
2. Hardware Installation
2.1 Telephony Card Installation
Remove the screws and open the top cover of the device, you can see the section of the slot that is
reserved for inserting the telephony card.
Note the PCIe slots and card slots as indicated in the following diagram.
Page 8
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
8
First put the telephony card in the slot:
Align the telephony card's PCIe interface and the edge of the baffle with the PCIe slot and gap
shown in the figure and insert it to fit perfectly.
Page 9
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
9
After the telephony card is installed, put the top cover back, install the baffle and tighten the
screws.
Note: Some telephony cards require an external power supply through the 12V 4-PIN connector,
otherwise the module will not be recognized by the system. In this case, please connect the
connector to the backplane power supply interface.
Page 10
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
10
2.2 UPS Installation
The following diagram shows the area where the UPS module will be installed, with the UPS
interface and the four studs marked on the diagram.
Page 11
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
11
To install the UPS module, simply insert it into the interface and fix the screws at the four corners.
Page 12
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
12
3. RAID Installation and Configuration
First, with the power supply disconnected, correctly install the RAID card and two hard drives.
3.1 CSM compatible module Configuration
Repeatedly press the BIOS shortcut key during the startup process to interrupt the computer's
startup and enter the BIOS setup interface.
Note: Different computers have different shortcut keys to enter BIOS (usually DEL, ESC, F1, F2, etc.)
Enter the BIOS settings, select Advanced→CSM configuration.
Page 13
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
13
Set Storage parameter as legacy, save the settings and restart.
3.2 Configure RAID mode
After powering on, keep pressing Ctrl + M to enter the Raid card and start configuring Raid mode.
Enter the configuration interface, select HBA 0: Marvell 0 and press Enter. If the Configuration
Wizard cannot be selected, you should see two hard drives under the New_VD directory.
Choose New_VD to enter, choose delete, and press Y to confirm.
Page 14
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
14
At this time, the two hard disks are transferred to Free Physical Disks.
Choose HBA 0: Marvell 0, enter. Select Configuration Wizard and enter.
Page 15
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
15
Press the space to select two hard disks.
After selecting, there will be an * mark in front of the corresponding hard disk.
Page 16
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
16
Move the cursor to the hard disk numbered 0 and press Enter.
Press Enter at the RAID Level on the right column and select RAID 1.
Name may be modified as appropriate.
Choose Next and press Y to confirm. F10 to save and exit, press Y to confirm.
Page 17
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
17
After power on, press Esc or Delete to enter the BIOS settings.
In Boot -> Boot Option, you can see the MARCELL Raid VD option, indicating that the setting is
successful, just set this item as the preference.
3.3 Install System
Install the MSU management software on the system interface, see the attachment Marvell_MSU_
Linux_v4.1.0.2032.zip, after decompression, use the command rpm -ivh MSU-4.1.0.2032-1.x86_64.rpm
to install.
3.4 View Info
Visit http://172.XXX.XXX.XXX:8845/MSU/JumpPage.php?Target=StoragePage and you can view the
RAID info on this equipment.
3.5 Troubleshooting method
Hardware location description:
The light on the left of the RAID card is PWR;
Page 18
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
18
The middle light is the SATA status of the right slot;
The right light is the SATA status of the left slot.
Description of equipment operating status:
In normal operation, except the PWR light, the rest are flashing;
When the hard disk is broken, the corresponding status light will always be on.
How to turn on the buzzer switch:
After installing the MSU management software, log in to the software interface and enable the
corresponding parameters.
3.6 Notes for troubleshooting
After the device fails, you need to replace it with a new hard disk. First, determine the location of
the bad hard drive, and then shut down the device.
After plugging in the new hard disk, turn on the device and the device will synchronize data
normally.
Although the device is modular design, but does not support
hot-plugging, it is strictly prohibited to insert or remove the module
while the device is in operation.
Page 19
IX160(P) Series Quick Start Guide
OpenVox Communication Co., LTD.
19
4. Install System
The IX160/IX160P will be pre-installed with the IPPBX system independently developed by
OpenVox. If you need to pre-install other systems (FreePBX/Issabel), please contact sales for
confirmation.
Loading...