OpenRun S803 User manual [EN]

OPENRUN

User Guide

S803

Contents

HOW IT WORKS

04

05

06

07

08

09

11

How to Wear

Volume

Multifunction Button

Check Battery Status

Headphone Controls

ON/OFF

Pairing

Changing languages

Restore Factory Settings

Multipoint Pairing

EQ Modes

Turn Multipoint Pairing Off

13

14

15

21

23

25

Storage and Maintenance

Moisture Detection Alert

Charging Tips

Warranty

282930

31

Switching EQ modes

CONTENTS

EXTRA FEATURES

CARE AND MAINTENANCE

01

32

33

34

CONTENTS

TROUBLESHOOTING

WHAT’S IN THE BOX

REGULATORY AND LEGAL INFORMATION

02

How It Works

03

LED Indicator

Headphone Controls

HEADPHONE CONTROLS

Power/Volume + Button

Volume - Button

Magnetic Charging Port

Multifunction Button

04

ON/OFF

ON/OFF

Power/Volume + Button

Turn on the headphones：

Press and hold the Power/Volume + Button until the LED Indicator
flashes blue.

*Audrey will say：“Welcome to Shokz”

Turn off the headphones：

Press and hold the Power/Volume + Button until the LED Indicator
flashes red.

*Audrey will say：“Power off”。

05

Pairing

PAIRING

1. Start with OpenRun turned off.

2. Press and hold the Volume + Button until the LED Indicator flashes
red and blue alternately.

Settings

BLUETOOTH

OpenRun by Shokz

Connected

3.Open your device's Bluetooth settings and select " OpenRun
by Shokz." Audrey will say "connected."

06

How to Wear

HOW TO WEAR

Pick up the headphones, bring them
behind the back of the base of your neck,
position the earhooks on your ears, then
enjoy your music!

*Wearing your headphones the wrong way could cause
discomfort. The transducers should rest in front of your ears.

07

Operate volume controls

Volume

while audio is playing.

VOLUME

Power/Volume + Button

Volume - Button

How to change volume:

While your audio is playing, adjust headphone volume by
pushing either the Volume + or Volume ‒ buttons.

*A “beep” will sound when the volume is at its max.

*Listening with headphones at high volume may affect your hearing
and the audio will be distorted.

08

Multifunction Button

MULTIFUNCTION BUTTON

Multifunction Button

Play/pause music

Click once

Next song

Double-click while music is playing

Previous song

Triple-click while music is playing

Answer call

Click once

End call

Click once

09

Multifunction Button

MULTIFUNCTION BUTTON

Play music

Pause music

Next song

Previous song

Switch language

Answer call

End call

Answer call waiting and
end current call

Click once

Click once

Double-click while music is playing

Triple-click while music is playing

Double-click while pairing

Click once

Click once during a call

Press and hold for 2 seconds
when receiving a second call

Ignore a call

Activate voice assistant

Redial last number

*Only applicable for phone calls, not online calls

Press and hold for 2 seconds
during an incoming call

Press and hold for 2 seconds
when device is on standby

Double-click on standby

10

Operate controls while

Check Battery Status

audio is not playing

CHECK BATTERY STATUS

Power/Volume + Button

Volume - Button

How to check battery status：

Click the Volume + or Volume - button while music is paused，
Audrey will tell you the battery status:

* "Battery high/Battery medium/Battery low/Charge me"

11

Extra Features

12

EQ Modes

EQ MODES

Standard Mode：

Balanced frequency for listening to music

Vocal Booster Mode：

Enhanced intermediate frequencies

for audiobooks, podcasts, etc.

13

Switching EQ Modes

Operate controls while music
is playing

SWITCHING EQ MODES

Power/Volume + Button

Volume - Button

How to switch EQ mode：

Press and hold both buttons （Power/Volume + Button and Volume ­Button）while music is playing until you hear a beep.

*Audrey will say：“EQ changed”

14

Multipoint Pairing

MULTIPOINT PAIRING

Pair Two Devices

Switch between two devices

seamlessly with multipoint pairing

15

Multipoint Pairing

Operate controls with
headphones powered off

MULTIPOINT PAIRING

1. Start with your headphones powered off.

2. Press and hold Volume + until Audrey will say “pairing” and the
LED indicator flashes red and blue alternately.

Audrey will say “pairing”

16

MULTIPOINT PAIRING

Power/Volume + Button

Multifunction Button

Audrey will say, "multipoint enabled."

3.Press and hold the multifunction button and Volume + button

until Audrey says, "multipoint enabled."

17

Settings

BLUETOOTH

MULTIPOINT PAIRING

OpenRun by Shokz

Connected

First Device

Audrey will say "connected".

4.Open first device's Bluetooth® menu and select "OpenRun
by Shokz."Audrey will say, "connected".

5.Turn your headphones off.

18

OpenRun by Shokz

connected

Bluetooth：turn on

MULTIPOINT PAIRING

Second Device

Audrey will say, "connected".

6.Re-enter pairing mode by pressing and holding Volume + until
Audrey says “pairing”and the LED indicator flashes red and blue

alternately.

7.Open second device's Bluetooth® menu and select "OpenRun
by Shokz."Audrey will say, "connected."

8.Turn your headphones off.

19

MULTIPOINT PAIRING

Settings

BLUETOOTH

OpenRun by Shokz

First Device

Connected

Bluetooth：turn on

Second Device

OpenRun by Shokz

connected

You will hear a beep, then Audrey will say

“Welcome to Shokz, connected. Second

device connected.”

9.Turn your headphones on. Your headphones are now connected
to both devices.

20

Turn Multipoint Pairing Off

Operate controls with
headphones powered off.

TURN MULTIPOINT PAIRING OFF

Audrey will say “pairing”

1. Start with your headphones powered off.

2. Press and hold Volume + until Audrey will say “pairing”

and the LED indicator flashes red and blue alternately.

21

TURN MULTIPOINT PAIRING OFF

Volume - Button

Multifunction Button

Audrey will say, "Multipoint disabled."

3. Press and hold the multifunction button and Volume - button

until Audrey will say, "Multipoint disabled."

22

Restore Factory Settings

Operate controls with
headphones powered off.

RESTORE FACTORY SETTINGS

Audrey will say “pairing”

1. Start with your headphones powered off.

2. Press and hold Volume + until Audrey will say “pairing”

and the LED indicator flashes red and blue alternately.

23

RESTORE FACTORY SETTINGS

Power/Volume + Button

Volume - Button

Multifunction Button

3.Press and hold the multifunction button, Volume ‒ button
and Volume + button until hear two beeps and feel the vibration.

4.Turn your headphones off. OpenRun is now reset and
can be re-paired to your device.

24

Changing Languages

Your headphones have four built-in languages:

Chinese, English, Japanese and Korean.

Follow the instruction when
headphones powered off

CHANGING LANGUAGES

Audrey will say “pairing”

1. Start with your headphones powered off.

2. Press and hold Volume + until Audrey will say “pairing”

and the LED indicator flashes red and blue alternately.

25

CHANGE THE LANGUAGE

Multifunction Button

3. Double-press the multifunction button. Languages have been
switched when you hear the corresponding language.

26

Care and Maintenance

27

Charging Tips

The headset will automatically
shut down when charging

CHARGING TIPS

Magnetic Charging Cable

Charging

When the headphones are at low battery, there will be a “charge
me” prompt and the red light will flash intermittently. Use the

Charging Completed

corresponding magnetic charging cable for charging.

The LED indicator will turn red during the charging process and the
headphones will automatically turn off. The LED indicator will turn
from red to blue when charging is complete.

28

Moisture Detection Alert

MOISTURE DETECTION ALERT

How it Works:

These headphones can detect liquid such as water, sweat, or rain.
If the headphones are plugged into the charger while wet, the LED
indicator will flash red and blue. The headphones will then beep.
If this happens, remove the charging cable, dry them completely,
then proceed with charging.

29

Storage and Maintenance

STORAGE AND MAINTENANCE

· Store the headphones in a cool, dry place. The working temperature
should be 0~45°C(32~113°F).Working in a cold/hot temperature,
highly humid area, or low air pressure environment may reduce the
battery life.

· Keep the product away from heat sources, direct sunlight,
combustible gas or other liquids.

· Keeping the charging port dry before connecting to the charger will
reduce the risk of damage.

· The headphones can be used for daily cleaning, but it cannot be
rinsed and soaked against the microphone hole, otherwise it may
affect the performance of the microphone.

· Clean the headphones with a soft dry cloth.

· Do not charge right after exercising, in case there's sweat inside the
charging port, which could lead to circuit burning while charging.

· After storage for a long period, please charge the headphones before
using again.

Note

Design and specification are subject to change without notice. For
the most up-to-date product information, please visit https://shokz.com.

Warning

To avoid the risk of explosion, fire, or leakage from toxic chemicals,
please do not disassemble the product or replace, deform, or
mutilate the battery.

30

Warranty

WARRANTY

Your headphones are covered by a warranty.

Visit our website at https://shokz.com/pages/warranty-landing

for details of the limited warranty.

*Failure to register will not affect your limited warranty rights.

31

Troubleshooting

TROUBLESHOOTING

If you have any trouble or problems,please visit
https://shokz.com/pages/faq
for more support!

32

What’s in the Box

OPENRUN

WHAT’S IN THE BOX

OpenRun

Box*1

Magnetic

Charging Cable*1

OpenRun

headphone*1

OpenRun

User Guide*1

OpenRun

Package*1

LegalUser Guide

OpenRun

Legal Statement*1

If any part of your product is damaged or missing, do not use
it.Contact authorized Shokz dealer or Shokz customer service.

*Please note that the packaging envelope may vary depending on
the sales region.

33

REGULATORY AND LEGAL INFORMATION

Regulatory and Legal Information

FCC Caution

Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC/IC radiation exposure limits set
forth for an uncontrolled environment and meets the FCC radio
frequency (RF) Exposure Guidelines and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment has very low levels of
RF energy that is deemed to comply without testing of specific
absorption rate (SAR).

34

REGULATORY AND LEGAL INFORMATION

Resposible party (contact for FCC matters only):
AfterShokz LLC.
3200 Gracie Kiltz Lane, Suite 400 Austin, TX 78758 USA
https://shokz.com

Industry Canada

This device complies with Industry Canada licence-exempt RSS
standard(s): Operation is subject to the following Two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.

CE Declaration of Conformity

Shokz Holding Limited hereby declares that this product is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU and all other applicable EU
Directive requirements. The complete declaration of conformity can
be found at:
https://shokz.com/pages/policies. Shokz’s EU representative
is AfterShokz Euro B.V., Schipholweg 103, 2316XC Leiden, Netherlands.

Frequency Range Max. Transmit Power

2400-2483.5MHz 3dBm(EIRP)

UK Declaration of Conformity

Shokz Holding Limited hereby declares that this product is in
compliance with the essential requirements and all other applicable
United Kingdom’s regulations. The complete declaration of
conformity can be found at: https://shokz.com/pages/policies.
Shokz’s authorised representative in the UK is Pinpoint Consumer
Electronics Ltd., Unit 35, Meridian House, Road One, Winsford
Industrial Estate, Winsford, Cheshire CW7 3QG.

WEEE Declaration of Conformity

This WEEE logo means that this product must not be discarded

35

REGULATORY AND LEGAL INFORMATION

as household waste, and should be delivered to an appropriate
collection facility for recycling. Proper disposal and recycling helps
protect natural resources, human health and the environment. For
more information on disposal and recycling of this product, contact
your local municipality, disposal service, or the shop where you
bought this product.

Australia/New Zealand

Singapore Philippines

36