OpenEye iPad MDVR User Manual

MDVR HD for the iPad

Instructions

www.openeye.net

OpenEye® iPad MDVR HD
Software Manual (v2.34)

Manual Edition 30882AF – MARCH 2015

©2015, OPENEYE
All Rights Reserved.

No part of this documentation may be reproduced in any means, electronic
or mechanical, for any purpose, except as expressed in the Software
License Agreement. OpenEye shall not be liable for technical or editorial
errors or omissions contained herein. The information in this document is
subject to change without notice.

The information in this publication is provided “as is” without warranty of any

kind. The entire risk arising out of the use of this information remains with
recipient. In no event shall OPENEYE be liable for any direct,
consequential, incidental, special, punitive, or other damages whatsoever
(including without limitation, damages for loss of business profits, business
interruption or loss of business information), even if OPENEYE has been
advised of the possibility of such damages and whether in an action or
contract or tort, including negligence.

This documentation is copyrighted. All other rights are reserved to
OPENEYE. OPENEYE, and OpenEye, are registered trademarks of
OPENEYE in the United States and elsewhere; Windows, and Windows XP
Embedded are registered trademarks of Microsoft Corporation. All other
brand and product names are trademarks or registered trademarks of the
respective owners.

OPENEYE
Liberty Lake, WA ● U.S.A.

The OpenEye MDVR HD software allows you to access your
OpenEye recorder from almost anywhere on your iPad. View live
video of your cameras, control pan/tilt/zoom cameras, and search
recorded video using a simple interface. This document describes
how to connect to an OpenEye recorder using the MDVR HD iPad
app and view live video.

Minimum Requirements

 OpenEye recorder

o OE3 E-Series Rev A (v1.0.1.71+)
o OE3 E-Series Rev B (v3.0.0.6+)
o OE-EMAX/OE-ESLIM (v1.3.3.7+)
o N, H, XR, and X-Series (v4.50.4204+)

 Supported models:

o Apple iPad generation 4 and above; iPad Mini generation

1 and above

 Internet connection to the recorder

Application Features

 Live View (Single and Multiplex)
 Megapixel Camera Support (When using Server version

4.50.4204+)

 Basic Search (When using Server v4.50.4204+)
 PTZ Control (Directional, Zoom and Preset modes)
 Relay Activate/Deactivate
 Snapshot
 Digital Zoom in Single/Full Screen for Live and Search

Commercial Recorder (E-Series)

Verify that the E-Series recorder is connected to the network.
Press Setup on the front panel or IR remote control, and then go
to Network > Network Settings and verify the network settings. If
you are accessing the recorder from outside your network (using
3G/4G or public Wi-Fi), verify that the correct ports are forwarded
to the recorder (the default ports necessary for remote connections
are 2000 and 2002).

Professional Recorder (N, H, X, Xr-Series)

Verify that the recorder is connected to the network. Enter Setup
on the recorder, and then click Network Setup to verify the
network settings. If you are accessing the recorder from outside
your network (using 3G/4G or public Wi-Fi), verify that the correct
ports are forwarded to the recorder (the default ports necessary for
remote connections are 2000 and 2002).

1. From your Apple iPad, tap the App Store icon.
Note To install an application from the App Store, you must

have a valid Apple iTunes account.

2. Tap Search and type OpenEye MDVR HD.

3. Follow the instructions to download and install the application.

4. When the application is successfully installed, the OpenEye
icon will appear on the device.