OpenEye CM-512 Installation Manual

Outdoor Speed Dome Camera

Installation Manual

Camera

CM-512

Accessories

CA-510G
CA-510W
CA-510C
CA-510P25
CA-510P50

CA-510PML
CA-510PMS
CA-510PA25
CA-510PA50

www.openeye.net

2

Outdoor High-Speed Dome Camera (CM-512)
Installation Manual

Manual Edition 31515AB – AUGUST 2013

©2013, OPENEYE
All Rights Reserved.

No part of this documentation may be reproduced in any means, electronic or mechanical, for any
purpose, except as expressed in the Software License Agreement. OpenEye shall not be liable for
technical or editorial errors or omissions contained herein. The information in this document is
subject to change without notice.

The information in this publication is provided “as is” without warranty of any kind. The entire risk
arising out of the use of this information remains with recipient. In no event shall OPENEYE be
liable for any direct, consequential, incidental, special, punitive, or other damages whatsoever
(including without limitation, damages for loss of business profits, business interruption or loss of
business information), even if OPENEYE has been advised of the possibility of such damages and
whether in an action or con tra ct or tort, inc lud ing neg lige nce .

This documentation is copyrighted. All other rights are reserved to OPENEYE. OPENEYE, and
OpenEye, are registered trademarks of OPENEYE in the United States and elsewhere; Windows,
and Windows XP Embedded are registered trademarks of Microsoft Corporation. All other brand
and product names are trademarks or registered trademarks of the respective owners.

OPENEYE
Liberty Lake, WA ● U.S.A.

31515AB 3

Important Safeguards

1. Read Instructions
Read all of the safety and operating instructions before using the product.

2. Retain Instructions
Save these instructions for future reference.

3. Attachments / Accessories
Do not use attachments or accessories unless recommended by the appliance
manufacturer as they may cause hazards, damage product and void warranty.

4. Installation
Do not place or mount this product in or on an unstabl e or improperly supported
location. Improperly installed product may fall, causing serious injury to a child or
adult, and damage to the product. Use only with a mounting device
recommended by the manufacturer, or sold with the product. To insure proper
mounting, follow the manufacturer's instructions and use only mounting
accessories recommended by manufacturer.

5. Power source
This product should be operated only from the type of power source indicated on
the marking label.

Precautions

Operating

• Before using, make sure power supply and others are properl y connected.

• While operating, if any abnormal condition or malfunction is observed, stop

using the camera immedia tel y and then contact your local dealer.

Handling

• Do not disassemble or tamper with parts inside t he camer a.

• Do not drop or subject the camera to shock and vibration as this can

damage camera.

• Do not block the cooling holes on the bracket. This camera has a cooling

fan inside the housing. Blocking the cooling holes will cause heat to build up
and cause malfunction.

• Care must be taken when you clean the clear dome cover. Scratches and

dust will ruin the image qual ity of your camera. Do not use strong or
abrasive detergents when cleaning the cam era body. Use a dry cloth to
clean the camera when it is dirty. In case the dirt is hard to remove, use a
mild detergent and wipe the camera gently.

4

Installation and Storage

Regulation

• Do not install the camera in areas of extreme temperatures in excess of the

allowable range. ( -58°F ~ 122°F / -50°C ~ 50°C)

• Avoid installing in humid or dusty places. The relative humidity must be

below 90%.

• Avoid installing in places where radiation is present.

• Avoid installing in places where there are strong magnetic fields and electric

signals.

• Avoid installing in places where the camera would be subject to strong

vibrations.

• Never face the camera toward the sun. Do not aim at bright objects.

Whether the camera is in use or not, never aim it at the sun or other
extremely bright objects. Otherwise the image may be smeared and sensor
may be damaged.

This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste in accor da nce with D irecti ve
2002/96/EC. Instead it shall be handed over to the applicable collection point
for the recycling of electrical and electronic equipment. By proper waste
handling of this product you ensure that it has no negative consequences for
the environment and human health, which could otherwise be caused if this
product is thrown into the garbage bin. The recycling of materials will help to
conserve natural resources.

For more details information about recycling of this product, please cont act
your local city office, your household waste disposal service or the shop
where you purchased the product.

Compliance is evidenced by written declaration from our suppliers, assuring
that any potential trace contamination levels of restricted substances are
below the maximum level set by EU Directi ve 2002 /95/ EC, o r are exempte d
due to their application.

31515AB 5

Warning

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICI NG TO QUA LIF IED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRI C SHOCK

DO NOT OPEN

Caution

DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.
DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

6

Standard Warranty

OpenEye warrants all new products to be free from defects in workmanship and
material under normal use for a period of two years after the date of purchase. Any
defective product that falls under this warranty will, at Openeye’s discretion, be
repaired or replaced at no additional charge. OpenEye may elect to replace defective
products with new or factory-reconditioned products of equal or greater value.
Repairs made necessary by reason of misuse, alteration, normal wear, or accident
are not covered under this warranty.

Exceptions to this are listed below.

• Three years on all Digital Recorders

• Three years on all fixed cameras.

All products shall be covered by a one-year advance replacement warranty.*
OpenEye will warrant all otherwise out-of-warranty replacement parts and repairs for

90 days from the date of OpenEye shipment.
The above warranty is the sole warranty made by OpenEye and is in lieu of all other

warranties by OpenEye express and implied, including without limitation the
warranties of merchant ability and fitness for a particular purpose. Under no
circumstances will OpenEye be liable for any conseq uent ial, incidental, special, or
exemplary damages arising out of or connected with the sale, delivery, use, or
performance of the product, even if OpenEye is apprised of the likelihood of such
damages occurring. In no event shall OpenEye liability exceed the purchase price of
the product.

This warranty gives you specific legal right and you may also have other rights which
may vary from state to state or country to country.

*Requires corresponding security deposit. Advanced Replacement is limited to
components only outside of the USA and Canada.

For the most up-to-date information, visit www.openeye.net.

31515AB 7

TABLE OF CONTENTS

Introduction ................................................................................................................................... 10

Overview .................................................................................................................................... 10

General Operation Requirements ............................................................................................... 10

System Configuration ............................................................................................................. 10

Getting Started .............................................................................................................................. 12

Box Contents .............................................................................................................................. 12

Dome Setup and Cable Connection ........................................................................................... 13

Preparations for Dome Setup ................................................................................................. 13

Switch Definitions .............................................................................................................. 15

RS-485 Switch Setting ...................................................................................................... 16

Camera ID Setting ............................................................................................................. 16

Dome Control Protocol Setting ............................................................................................... 17

Power Connector .............................................................................................................. 18

Apply Alarm I/O ................................................................................................................. 18

RS-485 Connector Definition ............................................................................................ 19

Grounding Recommendation ............................................................................................ 20

Dome Dimensions ...................................................................................................................... 21

Optional Accessories .................................................................................................................. 22

Dome Camera Accessories ................................................................................................... 22

Mounting Accessories ............................................................................................................ 22

Ceiling Mounting with Pole ..................................................................................................... 23

Wall Mounting with Wall Mount Bracket ................................................................................. 24

Wall Mounting with Corner Mount .......................................................................................... 26

Pole Mounting ........................................................................................................................ 27

Specifications ................................................................................................................................ 28

Camera Specifications ................................................................................................................ 28

PTZ Specifications ...................................................................................................................... 29

8

NOTES:

31515AB 9

INTRODUCTION

OVERVIEW

With a weather resistant design, the Integrated High Speed Dome Camera is
applicable for outdoor installations. The dome camera supports all-in-one cabling for
easy installation and can be integrated with CCTV products such as reocrders,
control keyboards, and CCTV accessories for a total surveillance solution. In
addition, a large set of built-in protocols provides connectivity to other surveillance
systems. The built-in proto co ls include OPTIX 3, Pelco, VCL, Philips, AD-422, and
many others.

GENERAL OPERATION REQUIREMENTS

A minimum of one control device is required for operation, such as a control
keyboard, or a recorder. The CM-512 includes a built-in receiver that decodes
commands from a control device.

Connect dome cameras to other devices, as shown in the diagram below, to
complete a video surveillance system.

System Configuration

Note To extend the network distance up to 1.2 km (4000 feet) and to protect the connected

devices, OpenEye recommends placing a repeater at the mid-point. However, a repeater
may be needed with network distances less than 1.2 km if the cables used are not CAT 5,
24-gauge cables. Refer to the repeater’s manual for detailed information.

10