Page 1
EASYMOBILE HD ANDROID
USER MANUAL
OpenEye® EasyMobile HD Android
Software Manual (v1.0.2.02)
Manual Edition 32007AA – MAY 2013
Page 2
EASYMOBILE HD APP
The OpenEye Android EasyMobile HD App software allows
you to access your EasyDVR recorder from almost anywhere
on your Android Tablet. Y ou c an view live video of your
cameras, control PTZ cameras, and even search recorded
video using a simple interface. This document describes how
to connect to an EasyDVR, and outlines basic functions of the
EasyMobile HD app.
Minimum Requirements
• EasyDVR Recorder:
o D120 (v745k+)
o D240 (v745k+)
o D480 (v745k+)
• Internet connection to the recorder
Recommended Requirements
• Android OS: v3.0, v4.0, v4.1, v4.2
• Dual Core processor, 1280 x 800 screen resolution
Application Features
• Landscape only mode
• Live View (Single and Quad)
• PTZ Control (Pan, Tilt, Zoom)
• Search (by Time & Date or Event)
• Snapshot (Live and Search)
• Digital Zoom
• Dual Stream
• Audio Out
2
Page 3
RECORDER CONFIGURATION
Verify that the recorder is connected to the network. Access
the setup MENU and choose NETWORK to verify the network
settings. If you are accessing the recorder from outside your
network (using 3G/4G or public Wi-Fi), verify that the Web
Port is forwarded to the recorder (the default Web Port
necessary for remote connections is 80).
DOWNLOADING THE APP
1. On your Android Tablet, tap the Play Store icon.
Note To install an application from the Play Store, you
must have a valid Gmail account.
2. Tap Search and type EasyMobile HD.
3. Follow the instructions to download and install the
application.
4. When the application is successfully installed, the
EasyMobile HD icon will appear on the device.
32007AA 3
Page 4
ADD A DVR SITE
1. Launch the OpenEye EasyMobile HD App.
2. Tap + (Add Site).
3. Type a Name to identify the recorder.
4. Type the IP, Port, User and Password of the recorder.
5. Tap Save.
Note Tap the recorder, then tap Edit to change the setup
of any recorder or tap Delete to remove a recorder.
4
Page 5
VIEW LIVE VIDEO
Connecting to a Recorder
1. Tap the recorder you want to connect to.
2. Tap Connect.
3. The Live View will start in Quad view.
4. When the recorder connects, a quad view will be added
to one of the four screens.
5. Swipe the screen from right to left on a camera screen to
scroll to the next quad view.
6. Tap a camera screen to open the channel full screen;
Tap again to return to the quad view.
Connect to Additional Recorders
1. Tap another site name to add chan nel s from that site to
the next available quad screen.
32007AA 5
Page 6
Disconnecting Individual Recorders
1. Tap the video for the channel to disconnect.
2. Tap .
3. Tap YES to confirm.
Dual Stream
Dual Stream can be used to select a secondary stream with
lower quality streaming video to help in low bandwidth
situations.
1. Tap to select the secondary stream.
Audio Out
Audio Out can be used to stream audio from the EasyDVR to
your mobile device.
1. Select the channel and tap to listen to audio
associated with the channel.
Digital Zoom
Use Digital Zoom to magnify the selected channel to see
close up details.
1. Select the channel.
2. Tap .
3. Use two fingers to pinch the screen to zoom in.
6
Page 7
Freeze Live View
Freezing the Live view will temporarily stop the live video
update on the screen. This does not affect the recording
status of the recorder.
1. Select the channel, and then tap .
Snapshot
Snapshot will capture an instant image of the selected
channel and save it to your mobile device.
1. Select the channel and tap .
32007AA 7
Page 8
CONTROL PTZ CAMERAS
PTZ control is available on cameras that are set up as PTZ on
the connected recorder. On PT Z-enabled cameras, you can
zoom in and out as well as pan and tilt or select sav ed
presets.
Note Some transmission latency may be visible when
controlling PTZ cameras depending on network
latency.
When viewing a camera enabled to PTZ, tap . Control
buttons will appear below the live video.
8
Page 9
PTZ Control Buttons
Zoom Out – Tap the Zoom Out button.
Zoom In – Tap the Zoom In button.
Pan Left – Tap the Left button.
Pan Right – Tap the Right button.
Tilt Up – Tap the Up button.
Tilt Down – Tap the Down button.
Presets – Tap the Presets button, then the
corresponding Preset number.
Speed Slider – Use the slider to select the panning
speed of the camera.
32007AA 9
Page 10
SEARCHING RECORDED VIDEO
Recorded video can be accessed with the EasyMobile HD
app using a general date and time search, or an event searc h.
Date & Time Search
1. Tap .
2. Select the desired date
and time.
3. Tap OK.
Tip Fast Forward,
Rewind, and Pause
control are
available.
4. Tap to return to live
video.
Event Search
1. Tap .
Tip Tap Prev or Next to
navigate pages of
events.
2. Tap an event from the list
to begin playback
Tip Fast Forward, Rewind,
and Pause control are
available.
10
3. Tap to return to live
video.
Page 11
www.openeye.net
1-888-542-1103
© 2013 OpenEye
All other rights are reserved to OPENEYE. OPENEYE, and OpenEye, are registered trademarks of OPENEYE in
the United States and elsewhere. All other brand and product names are trademarks or registered trademarks of
the respective owners.
32007AA 11
Loading...