Page 1
Opella, LLC
2701 Vista Parkway, Suite A-7
West Palm Beach, FL 33411
(772) 919-7905 Fax: (561) 640-3586
Product
Specification/Cut Sheet
13209.xxx - Square Bar Sink
12”
6”
12”
3.5”
The following guideline provides the only type of
installation recommended by Opella, LLC.
Square Bar Sink
Opella Model # 13209.xxx
Lenght: 12”
Width: 12”
Depth: 6”
18/8.5 Stainless Steel
3-1/2” Drain Opening
Undermount or Drop-In
DIMENSIONS
Length: 12”
Width: 12
Depth: 6”
CARE AND CLEANING
Care should be given to the cleaning of
:
this product. While its finish is extremely
durable, it can be damaged by harsh
abrasives or polish. To clean, simply
wipe gently with a damp cloth and blot
dry with a soft towel.
NOTE: Dimensions may vary +/-1/2” and are subject to change or cancellation.
Primary dimensions are provided in Imperial measurements, transposition to millimeters is the
sole responsibility of the installer. Dimensions for Location of Supply are Suggested.
Opella, LLC assumes no responsibility or liabili ty for local or state regulations which deviate
from national standards. It shall be the responsibility of the installer to comply with local codes
and standards prior to installation of any Opella product.
www.opella.com
Loading...