ooma SENSE001 User Manual

Key Features Additional Information Need Help? Pair Your Sensor Mount Your Sensor

Step 1 Step 2

Quick Start Guide

A

C

D

Quick release button

E

Pairing button

F

Tamper sensor

G

Mounting plate

To get started, download and install the Ooma Home
Monitoring app on your iOS or Android device.
The app can be found at: ooma.com/app

Using the included adhesives pads or screws, mount
the large device in a place where it will not come into
contact with water (it is not waterproof). Mount the
water sensor probe so that it is either standing up

A

Status indicator light

B

Water probe

B

C

Cable wrap

When the app is installed, log in using your Ooma
phone number and My Ooma password. If you forgot
your password, reset it at: my.ooma.com

Complete the initial setup in the app, and then follow
the instructions on your screen to pair your sensor.

or laying down in a position that will allow the two
gold probes to make contact with water in the event
of a leak.

Starting pairing mode

Your sensor automatically enters pairing mode when
you insert the batteries. You can also press and hold

the pairing button for ve seconds to start pairing

mode. Status indicator light blinks quickly when in
this mode.

Checking battery level

Tap the pairing button to check the battery level.
A long ash indicates that the battery is good.
A slow blink indicates that the battery is low.

A

Status indicator reference

Support articles

www.ooma.com/support

User manuals

www.ooma.com/userguide

Community forum

forums.ooma.com

Live customer care:

1-888-711-6662 (US)

1-866-929-5552 (Canada)

Pairing mode

D

Quick red ashes

Legal

For warranty, safety, and other legal information,

Battery good

Long red ash

visit ooma.com/legal

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

If you are mounting the water probe using screws,
remove the screw cap to expose the screw hole.

E

F

G

A

Battery low

Short red ashes

Software update

Slow red double ashes

(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.

700-0165-100

Ooma-QSG-Water-Sensor_EN 2016-09-30-R4.indd All Pages 9/30/16 9:24 PM

1 42 53 6