Onyx MATE-1901, MATE-2201, MATE-2401 User Manual

Panel PC MATE- 1901/2201/2401

MATE-1901/2201/2401

19”/22”/24” LCD with LED Backlight

Intel

®

CoreTM i3 Dual Core Processor

Intel

®

H81 Chipset

MATE-1901/MATE-2201/MATE-2401 Manual 1st Ed

November, 2014

Panel PC MATE- 1901/2201/2401

Copyright Notice

This document is copyr ighted, 2014. All right s are reserved. The
origi nal m anufacturer reserves the right to make improvements to
the products descri bed in this manual at any time without notice.

No part of thi s manual may be reproduce d, copied, tr anslated, or
transmit ted in any form or by any means without the prior written
permission of the original m anufacturer. Information provided in
this manual is i ntended t o be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, nor for
any infringements upon the rights of third parties, which may result
from its use.

The material in this document is for product information only and
is subject t o change without notice. While reasonable efforts have
been made in the pr epar ation of this document t o assure its
accuracy, ONYX Healthcare Inc., assumes no liabilities resulting
from error s or omissions in this document , or from the use of the
information contained herein

ONYX Healthcare Inc. reserves the right to make changes in the
product design wit hout notice t o its users

Panel PC MATE- 1901/2201/2401

Acknowledgments

 Intel

®

CoreTM i3 is registered tradem ar ks of Intel® Corporation.

 IBM, PC/AT, PS/2 are trademarks of International Busi ness

Machines Corporat ion.

 Microsoft

®

Windows is a registered tr adem ar k of Microsoft®

Corporation.

 RTL is a tradem ar k of Realtek Semi-Conductor Co., Ltd.
 C&T is a trademark of Chips and Technologies, Inc.
 UMC is a trademark of United Mi croelectronics Corpor ation.
 ITE is a trademark of I ntegrated Technology Express, Inc.
 SiS is a trademark of Silicon Integrated Systems Corp.
 VIA is a trademar k of VIA Technology, Inc.

All other product names or trademarks are properties of their r
espective owners.

Panel PC MATE- 1901/2201/2401

Packing List

Befor e you begi n installing your panel PC, please make sure that
the follo wing ite ms hav e been shipped:

 MATE-1901/2201/2401 Panel P C
 Utility DVD-ROM, which contains Drivers and Utilities

Panel PC MATE- 1901/2201/2401

If any of these item s are missing or damaged, you should contact
your distr ibutor or sales representative immediately.

Headquarters
Onyx Healthca r e Inc.
2F, No.135, Lane 235, Pao-Chi ao Rd.,
Hsin-Tien City , Taipei 231, Taiwan, R.O.C.
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
http://www.onyx-healthcare.com

Worldwide Offices:
Onyx Healthca r e, USA Inc.
2663 Saturn street , Brea, CA 92821, USA
Tel : [phone]
Fax: [phone]
Email: [e-mail]

Onyx Healthca r e E UROPE B. V.
Ekkersrijt 4002, 5692 DA Son, The Netherlands
Tel : [phone]
Fax: [phone]
Email: [e-mail]

Panel PC MATE- 1901/2201/2401

Onyx Healthca r e Technology GmbH
An der Trift65d
63303 Dreieich , Germany
TEL: [phone]
Fax: [phone]
Email: [e-mail]

Onyx Healthca r e ( S U ZHOU) INC.
Room 12, 2F, Building B, No.5 Xing Han Street, Suzhou Industrial
Park, Jiang Su Province, China
Tel: [phone]
Fax: [phone]
Email: [e-mail]

Onyx Healthca r e Si ngapor e P TE LTD
57 Genting Lane, #07-00, Singapore 349564
Tel: [phone]
Fax [phone]
Email: [e-mail]

Panel PC MATE- 1901/2201/2401

Safety & Warranty

1. Read these safety instr uctions carefully.

2. Keep this user's manual for later refer ence .

3. Disconnect t his equi pm ent from any AC outl et before cl eaning.
Do not use liquid or spray detergents for cleani ng. Use a dam p
cloth.

4. For pluggable equipment, the power outl et must be installed

near the equipm ent and must be easily accessible.

5. Keep this equipment away fr om humi dity.

6. Put this equipment on a reliable surface during installation.

Dropping it or letti ng it fall could cause damage.

7. The openings on the enclosure are for air convection. Protect
the equipment from overheati ng. DO NOT COVER THE
OPENINGS.

8. Make sure the voltag e of the power source is correct before
connecting the equipment to the power outlet.

9. Warning: To avoid ri sk of electric shock, thi s equipmen t
must only be connected to a suppl y main s wi th protective
earth. (Avertissement: Pour évit er tout risque de choc

électrique, cet appareil doit être connect é à une
alimentation secteur avec une prise de terre)

10. Position the power cord so that people cannot step on it . Do
not place anything over the power cord.

11. All cautions and warnings on the equipment shoul d be noted.

Panel PC MATE- 1901/2201/2401

12. If the equipment is not used for a long time, disconnect it from
the power source to avoid damage by transient over-voltage.

13. Nev er pour any liquid into an opening. This coul d cause fi r e or

electri cal shock.

14. Never op en the equip ment. For safety reasons, only

qualified service personnel should op en the equipment .

15. Warning: Do not modify this equipment without

authoriza t io n of the manuf act urer. (Avertissement: Ne pas

modifier cet équipement sans l'autorisation du fabricant)

Panel PC MATE- 1901/2201/2401

16. If any of the following situations arises, get the equipment

checked by service personnel:

a. The power cord or plug is damaged.
b. Liquid has penetrated into the equi pm ent.
c. The equipment has been exposed to moisture.
d. The equi pm ent does not work well, or you cannot get it

to work accordi ng to the users manual.
e. The equipment has been dropped and damaged.
f. The equipm ent has obv ious signs of breaka ge.

17. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). IT MAY
DAMAGE THE EQUIPMEN T

.

18. External equipment intended for connection to signal
input/output or other connectors, shall comply with
relevant UL / IEC st and ard (e.g . UL 1950 for IT equipment
and ANSI/AAMI ES 60601-1: 2005 AND CAN/CSA-C22.2 No.
60601-1:08 / IEC 60601 series for systems – shall comply
with the standard I E C 60601-1-1, Safet y requ irements for
medical electrical systems. Equipment not complying
with UL 60601-1 shall be kept outside the patient
environment, as defined in the standard.

Caution:

It may cause the danger of exp losi on if battery is incorrectly
replaced. Replace only with sam e or equivalent type
recommended by t he m anufacturer.

Panel PC MATE- 1901/2201/2401

Classification

1. Degree of pr oduction against electr ic shock: not classified

2. Degree of pr otection against t he ingr ess of water: IPX0

3. Mode of operation: Continuous

4. Type of protection against electric shock: Class I equipm ent

5. No Applied Part, No AP/ APG

Panel PC MATE- 1901/2201/2401

FCC

This devi ce complies with P a r t 18 FCC
Rules. Operation is subject to the followi n g
two conditions: (1) this device may not
cause harmful in t erf erence, and (2) this
device must accept any interference
received including interferen ce t hat may
cause undesi red operat ion.

Panel PC MATE- 1901/2201/2401

UL Module Description

MATE-1901/2201/2401 modules are
developed to suitable for the Classification
Mark requ i rement