Page 1
USER GUIDE
POE & Optical Transmission
International Standard Intelligent POE injector
Page 2
Statement
Copyright @ 2002-2013 Optical Network Video Technologies (Shenzhen) Co., Ltd
All Rights Reserved
®
!
Packing List
Please ki ndly chec k the follo wing items:
1. POE inje ctor 1 piec e
2. Power ca ble 1 piece
3. Machin e parts 1 set
4. User Man ual /Warr anty Card /conformity ce rtifica te
Note
If any shor tage or dam age found , please contact u s in time.
This docu ment cont ains prop rietary inform ation tha t is protec ted by copyright . No part of th is docume nt may be
reprodu ced, tran smitted , transcribed, s tored in a re trieval s ystem, or transl ated into a ny langua ge, in any fo rm or by
any means , electro nic, mech anical, magnet ic, optic al, chemi cal, manual or oth erwise wi thout the p rior writ ten
permiss ion of Opti cal Netwo rk Video Technol ogies (Sh enzhen) C o., Ltd.
is the regi stered tr ademark of Optic al Networ k Video Tec hnologi es (Shenzhen) Co ., Ltd. The i nformat ion
and produ ct specif ication s within this docu ment are su bject to ch ange at any time, without not ice and wit hout obli gation to n otify any p erson of su ch change.
Page 3
Product overview
Product Introduction
ONV’s POE i njector s completely abi de by IEEE8 02.3af/ IEEE802.3at/ LTPoE++ (super hi ght power) protocols,
15.4wat ts/30wa tts/95watts as p ort outpu t maximum p ower . Basing on the e xisting n etwork in terface and no need
change an ything, u sing a Cat5 & Cat5e UTP and more ad vanced UT P to supply the power source to s mall-po wer
network d evices, m eanwhile and offering dat a transmi ssion . Thi s will decrease th e use of exte rnal powe r cables ,
bringin g down the co st , guaranteeing the netwo rk runnin g stably .
Low cost t o rea lize p owe r ove r Ethe rne t , no ne ed to ch ang e exi stin g net work,PO E inj ectors ca n eas ily reali ze po wer ov er Et her net so t hat s avi ng the p urc hasing of
POE swit ch an d powe r cab le , wh ich br ing s dow n the co st of n etw ork de vic es for the us ers . T his serie s inc ludes 100 0Mp bs spe ed ra te PO E prod uct s ,su ppor ts
10/100 /10 00Mp bs tr ans miss ion s pee d rate .To r edu ce the e qui pment cos t at th e same time , wil l not reduc e the d ata tr ans mis sion r ate , whi ch bri ngs
high-e ffe ctiv e , hig h-s peed , h igh -qu alit y exp eri ence t o the u sers.
Note
The words “ POE injec tor”etc. refer red in this u ser guide , i f no special expla nations , it will mea n International
Standar d Intelli gent POE injecto r , Hereina fter refe rred to as POE injec tor .
Feature
!
Be Comp liant with I EEE802.3 , IEE E802. 3u, I EEE80 2.3 af /IEEE80 2.3at stan dard
Offer 1 0/100Mpb s , 10/100/1 000 Mbps ad apt ive RJ4 5 por t , support PO E function
2 x N piece s 10/100Mp bs copper ca ble RJ45 por t +1 pi ece AC fe mal e jack (A C11 0-245V inp ut) or 1 piece D C female jac k
(DC24 -36V /48-5 7Vinput );
Singl e POE port can s upport pow er up t o 15.4w att s(af) o r 30w atts(at) /95watts(L TPoE++)
Suppl y the power to t he powered d evi ces tha t are c ompli ant w ith IEEE80 2.3af /at st andard
CE mark , commerci al , FCC, Part 1 5 Cla ss B , RoHS ;
The sma ll, compac t, quiet des ign w ith fre e hea t dissi pat ion is suita ble for desk -mounted a nd wall-mo unted type .
Suppo rt lightni ng protect ion for netw ork p ort and p owe r input port , u p to level 2 lig htning pro tection
Panel i ndicator s monitori ng work stat us & he lp , faul t ana lysis.
High- performa nce full loa d power char act erist ic
Page 4
Technical Structure and Port Description
25mm
80mm
76mm
CA
BD
AC 220V 5 0Hz
B
D
279mm
PoE
1
2
3
4
44mm
195mm
Etherne t
PoE
Etherne t
A
1
2
3
C
Power Sourcing Equipment
Power over Ethernet midspan injectoe 4 ports
PWR
4
AC 220V 50 Hz
B
D
440 mm
44m m
280 mm
A
C
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
PoE Out
Ethernet in
PoE Out
Ethernet in
PoE Out
Ethernet in
PoE Out
Ethernet in
AC 220V 5 0Hz
B
D
279mm
PoE
1
2
3
4
44mm
195mm
Etherne t
PoE
Etherne t
A
1
2
3
C
Power Sourcing Equipment
Power over Ethernet midspan injectoe 4 ports
PWR
4
5
6
7
8
5
6
7 8
AC 220V 50 Hz
B
D
440 mm
44m m
280 mm
A
C
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PoE Out
Ethernet in
PoE Out
Ethernet in
Single-port POE injector
DC power input type
A. Et herne t input R J45 por t B. POE ou tput wo rking i ndica tor
C.P OE outp ut RJ45 port D. D C24~3 6V/48 ~57V in put
Single-port POE injector
AC power input type
4-port POE Mid-span injector
A. PO E outpu t RJ45 po rt B. E thern et inpu t RJ45 po rt
C. PO E outpu t worki ng stat us indi cator
D. AC 100-2 20V 50/ 60Hz in put por t
8-port POE Mid-span injector
A. PO E outpu t RJ45 po rt B.Et herne t input R J45 por t
C.P OE outp ut work ing sta tus ind icato r D. AC10 0-240 V 50/60 Hz inpu t port
16-port POE Mid-span injector
A. PO E outpu t RJ45 po rt B.Et herne t input R J45 por t
C.P OE outp ut work ing sta tus ind icato r D. AC10 0-240 V 50/60 Hz inpu t port
24-port POE Mid-span injector
A. PO E outpu t RJ45 po rt B.Et herne t input R J45 por t
C. PO E outpu t worki ng stat us indi cator D . AC100 -240V 5 0/60H z input p ort
A.E thern et inpu t RJ45 po rt
B.W orkin g statu s indic ator
C.P OE outp ut RJ45 p ort
D. AC 100-2 40V
50/ 60Hz in put por t
PoE Injector
A C
B
Page 5
Indicator description:
Indicator
Status
Descripti on
Power ind icator: P
Working
Power off
PoE indic ator: PoE
(Green LE D)
Connect ed PD devic e, working properly
Short cir cuit or Cur rent overload
No connec ted PD devi ce or No power supply
ON
Blink
OFF
ON
OFF
Conne ct to power
Smart m anaged PoE s witch adop ts AC 1 00-24 0V, 5 0/60H z.
1.Plea se check the p ower suppl y specific ati on matc hes w ith the requ ired;
2.Conn ect switch p ower wire to A C power sock et, s hown as i n the f ollowing f igure.
Power Su ppl y Connect ion F igur e Mounti ng Ki ts Ins tal lat ion Fi gur e
Rack Ins tal lati on Fi gur e
L Angle Ir on
Screw
After i nstallat ion, pleas e che ck:
If ther e is enough sp ace for heat s ink ; if the po wer s ocket i s sui table for sw itch speci fication ; if the power , switch and r ack a re
prope rly ground ed and if the co nnection b etw een swi tch a nd othe r net work equip ments are no rmal.
Note: 1)P lease mak e sure that p owered devices c onforms t o IEEE802 .3af/at
2)PoE inj ector tha t support s LTPoE++ high pow er standa rd can achi eve super high pow er supply f unction
!
Page 6
Installation guide
Please install with the supporting devices.
Installation
Please co nfirm the f ollowin g things before in stallat ion:
1. Whethe r POE port po wer supply power meet the pow er requir ement of th e connected devi ces or not .
2. Whethe r the POE sta ndard requirements and po wer suppl y mode matc h with the powered d evices or n ot ,
Mid-spa n : 4,5+; 7,8 -/ End-span : 1,2+ ; 3,6-;
3. Whethe r the power o f the matched power adapter i s consist ent with th e label specific ation req uiremen t of
the Ether net switc h
Please in stall the P OE inject ors as per followi ng steps :
1. Put POE in jectors o n big enoug h and steady desk
2. Use the po wer adapt er to conne ct with power inpu t port , and us e power cab le to connect the po wer socke t.
3. Connec t network d evices wi th the Ethernet po rt via netw ork cable
!
Power
If initia lizatio n is incons istent with the ab ove, plea se check th e power.
Note
!
Note
1. Don’t pu t any heavy g oods on the P OE injectors and m ake sure PO E injecto rs get excellent v entilat ion and hea t
dissipa tion envi ronment s
2. Please t urn off the p ower before hot plugging
Connect w ith power c able , inse rt jack , turn on the po wer . After s tartup, t he LEDs shows foll owing con ditions :
1. Power LE D indicat or is on all th e time
2. After th e POE port co nnects with PD , POE i ndicato r is ON.
Page 7
Connection Diagram
A
C P
o
we
r
Powe
r
P
oE Mi
d-
spa
n
P
SE
3
1016
P
oE
E
t
he
r
n
et
P
o
E
Wir
e
l
ess
Po
E I
P
C
a
m
er
a
Po
E I
P
Ca
m
e
r
a
D
a
t
a+
p
ower
Da
ta
+powe
r
Da
t
a+ p
o
wer
P
ow
er
E
t
h
er
ne
t
S
w
it
c
h
Page 8
Model description with details
www.onv.com.cn
Tel:+ 86- 755 -33376606 Fax :+8 6-7 55- 33376608 E mai l:o nv@ onv.com. cn
Addre ss: R oom 1 003, Block D , Tair an bu ild ing , C hegongmi ao, F uti an di strict ,Shenz hen , Chi na
Facto ry ad dre ss: No 5, A buildi ng, S enY uTa i S&T park, Longh ua ro ad, B aoAn district ,Sh enz hen, China
PSE 3101A C: sing le-po rt 10/1 00Mbp s POE inj ector , s inge po rt supp orts PO E IEEE8 02.3a f, AC11 0-245 V input , P OE port o utput p ower : 15 .4wat ts, tot al powe r : 16wat ts.
PSE 3101A C-at: s ingle -port 1 0/100 Mbps PO E injec tor , sin ge port s uppor ts POE IE EE802 .3at ,A C110- 245V in put , POE p ort out put pow er : 25.5 watts total p ower : 30 watts .
PSE 3101 G: si ngle- port 10 /100/ 1000M bps POE i nject or , sing e port su pport s POE IEE E802. 3af ,AC 110-2 45V inp ut , POE po rt outp ut powe r : 15.4w atts, t otal po wer : 16w atts.AC
PSE 3101 G-a t: sing le-po rt 10/1 00/10 00Mbp s POE inj ector , s inge po rt supp orts PO E IEEE8 02.3a t ,AC11 0-245 V input , P OE port o utput p ower : 25 .5wat ts, tot al powe r : 30wat ts.AC
PSE 3101D C: DC inp ut sing le-po rt 10/1 00Mbp s POE inj ector , s inge po rt supp orts PO E IEEE8 02.3a f ,DC8- 32V inp ut , POE po rt outp ut powe r : 15.4w atts, t otal po wer : 16w atts.
PSE 3101D C : DC i nput si ngle- port 10 /100/ 1000M bps POE i nject or , sing e port su pport s POE IEE E802. 3af ,DC 8-32V i nput , PO E port ou tput po wer : 15 .4wat ts, tot al powe r : 16wat ts.G
PSE 3101D C-at: D C input s ingle -port 1 0/100 Mbps PO E injec tor , sin ge port s uppor ts POE IE EE802 .3at ,D C24-3 6V inpu t , POE por t outpu t power : 2 5.5wa tts, to tal pow er : 25.5 watts .
PSE 3101D CG-at : DC inpu t singl e-por t 10/10 0/100 0Mbps P OE inje ctor , si nge por t suppo rts POE I EEE80 2.3at , DC24- 36V inp ut , POE po rt outp ut powe r : 25.5w atts, t otal po wer : 25. 5watt s.
PSE 3104: 4 -port 1 0/100 Mbps PO E mid-s pan inj ector , I EEE80 2.3af , Volta ge inpu t: 48~5 7VDC po wer:A C100~ 240V, 50/60 Hz, POE p ort pow er : 15.4 watts , t otal po wer : 60w atts
PSE 3104- at: 4-p ort 10/ 100Mb ps POE mi d-spa n injec tor , IEE E802. 3at , POE p ort pow er : 25.5 watts , t otal po wer : 120 wattsVol tage in put: 48 ~57VD C power :AC10 0~240 V,50/ 60Hz,
PSE 3104G : 4-por t 10/10 0/100 0Mbps P OE mid- span in jecto r , IEEE8 02.3a f , POE por t power : 1 5.4wa tts , tot al powe r : 60wat tsVol tage in put: 48 ~57VD C power :AC10 0~240 V,50/ 60Hz,
PSE 3104G -at: 4- port 10 /100/ 1000M bps POE m id-sp an inje ctor , IE EE802 .3at , PO E port po wer : 25. 5watt s , total p ower : 12 0watt sVol tage in put: 48 ~57VD C power :AC10 0~240 V,50/ 60Hz,
PSE 3108: 8 -port 1 0/100 Mbps PO E mid-s pan inj ector , I EEE80 2.3af , Vo ltage i nput: 4 8~57V DC powe r:AC1 00~24 0V,POE p ort po wer : 15 .4wat ts , tota l power : 1 20wat ts
PSE 3108- at: 8-p ort 10/ 100Mb ps POE mi d-spa n injec tor , IEE E802. 3at ,Vol tage in put: 48 ~57VD C power :AC10 0~240 V, POE p ort pow er : 25.5 watts , t otal po wer : 220 watts
PSE 3108G : 8-por t 10/10 0/100 0Mbps P OE mid- span in jecto r , IEEE8 02.3a f , Voltag e input : 48~57 VDC pow er:AC 100~2 40V,PO E port p ower : 1 5.4wa tts , tot al powe r : 120wa tts
PSE 3108G -at: 8- port 10 /100/ 1000M bps POE m id-sp an inje ctor , IE EE802 .3at , Vol tage in put: 48 ~57VD C power :AC10 0~240 V,PO E port po wer : 25. 5watt s , total p ower : 22 0watt s
PSE 31016 : 16-po rt 10/1 00Mbp s POE mid -span i nject or , IEEE 802.3 af ,Volt age inp ut: 48~ 57VDC p ower: AC100 ~240V, P OE por t powe r : 15.4w atts , to tal pow er : 240w atts
PSE 31016 -at: 16 -port 1 0/100 Mbps PO E mid-s pan inj ector , I EEE80 2.3at , Vo ltage i nput: 4 8~57V DC powe r:AC1 00~24 0V,POE p ort po wer : 25 .5wat ts , tota l power : 4 40wat ts
PSE 31016 G: 16-p ort 10/ 100/1 000Mb ps POE mi d-spa n injec tor , IEE E802. 3af , Volt age inp ut: 48~ 57VDC p ower: AC100 ~240V, POE po rt pow er : 15.4 watts , t otal po wer : 240 watts
PSE 31016 G-at: 1 6-por t 10/10 0/100 0Mbps P OE mid- span in jecto r , IEEE8 02.3a t , Voltag e input : 48~57 VDC pow er:AC 100~2 40V,PO E port p ower : 2 5.5wa tts , tot al powe r : 440wa tts
PSE 31024 : 24-po rt 10/1 00Mbp s POE mid -span i nject or , IEEE 802.3 af ,Volt age inp ut: 48~ 57VDC p ower: AC100 ~240V, P OE por t powe r : 15.4w atts , to tal pow er : 440w atts
PSE 31024 G: 24-p ort 10/ 100/1 000Mb ps POE mi d-spa n injec tor , IEE E802. 3af , Volt age inp ut: 48~ 57VDC p ower: AC100 ~240V, POE po rt pow er : 15.4 watts , t otal po wer : 440 watts
PSE 3401: 1 0/100 Mbps PO E mid-s pan inj ector , I EEE80 2.3af , Voltag e input : 48~57 VDC pow er:AC 100~2 40V, POE p ort po wer : 60 watts , t otal po wer : 440 watts
PSE 3401G : 10/10 0/100 0Mbps P OE mid- span in jecto r , IEEE8 02.3a f ,Volta ge inpu t: 48~5 7VDC po wer:A C100~ 240V, PO E port p ower : 6 0watt s , total p ower : 44 0watt s
PSE 3501: 1 0/100 Mbps PO E mid-s pan inj ector , I EEE80 2.3af , Vo ltage i nput: 4 8~57V DC powe r:AC1 00~24 0V,POE p ort po wer : 95 watts , t otal po wer : 440 watts
PSE 3501G : 10/10 0/100 0Mbps P OE mid- span in jecto r , IEEE8 02.3a f , Voltag e input : 48~57 VDC pow er:AC 100~2 40V,PO E port p ower : 9 5watt s , total p ower : 44 0watt s
Loading...