On Track Innovations OTI EFPRFN900A User Manual

Easy Fuel Plus
RF Nozzle
User Manual

Confidential & Proprietary

Version 2.02

Easy Fuel Plus Rf Nozzle Version 2.01
Revision History

Revision History

Version Description Date Author

1.00 First draft 2 April 2008 Avner

1.01 Added EF-VID support 3 April 2008 Avner

2.00 Major revision 18 March 2010 Avner

2.01 Minor revisions 23 March 2010 Avner & Hemy

2.02 Modifications for latest HW - V4.4.0 15 July 2012 Hemy

NOTICE

This manual contains intellectual property, including but not limited, to trade secrets
and know-how, operation procedures and production procedures that belong solely to
OTI. Disclosure and/or use and/or reproduction of any part of the above are strictly
forbidden, except under a written license from OTI.

Confidential & Proprietary Page A

Easy Fuel Plus Rf Nozzle Version 2.01
FCC Compliance

FCC Compliance

This device (RF nozzle model EFP-RFN900) complies with Part 15, of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that

may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15, subpart C of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications in this equipment, not expressly approved by the party
responsible for compliance (On Track Innovations Ltd,) could void the user’s
authority to operate the equipment.

FCC ID:JNXOTI-EFPRFN900A

Responsible Party:

OTI America

Suite 105
111 Wood Ave. South
Iselin, NJ 08830
USA
Tel: [phone]
Fax: [phone]

[e-mail]

Confidential & Proprietary Page B