On the Edge Marketing Barstool User Manual

OR

BARSTOOL ASSEMBLY INSTRUCTIONS

List of Contents

1 - (2) allen wrenches

2 - (4) sleeved allen head screws

3 - (4) machine screws or

self-tapping screws

4 - (4) shims

5 - (2) barstool legs

6 - (1) foot ring

7 - (1) seat pad

2

5

1

3

4

6

7

Step 1: Place the two legs together as
shown in the image above.

Step 3: Place the seat pad on a at stable surface with the

underside facing up. Turn the assembled legs and place it
on the underside of the seat pad. Align the holes in the legs
with the holes in the seat pad base. Using the supplied
machine screws or self-tapping screws secure the seat pad
to the legs.

Step 2: Slide the ring over the legs and align the holes on the
ring with the holes on the legs. Slide the sleeved, allen head
screw into the hole and an allen head screw through the other
side and tighten down using the supplied allen wrenches.
Repeat for the other holes.

If the stool legs are uneven insert a shim between
the foot pad and the barstool leg to level the barstool.

For replacement parts or missing pieces, please do not return this product to the retailer. Call 949.305.4830 for free replacement parts.

rev. 06-2008