How it Works
Ontech
Loading...
GSM 9050
Reference Manual
30 pgs1.15 Mb0

Ontech GSM 9040, GSM 9050 Reference Manual

Ontech GSM 9040/50
Reference Manual
English
-1 -
Content
Welcome...................................................................................................................................... 5
Overview ..................................................................................................................................... 6
Get started ................................................................................................................................... 8
SIM-card .......................................................................................................................................... 8
Connect the unit and turn it off ...................................................................................................... 8
Program you password .................................................................................................................... 8
Change password ............................................................................................................................ 9
Using apps ................................................................................................................................. 10
Install the app ................................................................................................................................ 10
Settings the first time .................................................................................................................... 10
Install the app ................................................................................................................................ 11
Settings the first time .................................................................................................................... 11
Functions ................................................................................................................................... 12
Set functions .............................................................................................................................. 14
Control the unit .......................................................................................................................... 16
Alarms ....................................................................................................................................... 18
Store numbers in the alarm list with an Android telephone......................................................... 18
-2 -
Store numbers in the alarm list with an Iphone or other smartphone ......................................... 18
Alarm cable .................................................................................................................................... 19
Connecting wired alarm sensors ................................................................................................... 19
Delay of wired alarms .................................................................................................................... 20
Alarm from a wired alarm sensor .................................................................................................. 20
Temperature alarms from the unit ............................................................................................... 21
IR controller for air pumps .......................................................................................................... 22
Other functions .......................................................................................................................... 24
Launch Garage Opener .................................................................................................................. 24
Add a user to the list ..................................................................................................................... 25
Erase a user from the list ............................................................................................................... 25
Get information of users from the unit ......................................................................................... 25
Others ........................................................................................................................................ 26
Green lamp .................................................................................................................................... 26
Red lamp ........................................................................................................................................ 26
Both lamps ..................................................................................................................................... 26
Trouble shooting guide ............................................................................................................... 29
Tip ............................................................................................................................................. 29
-3 -
Technical specifications .............................................................................................................. 30
Support ...................................................................................................................................... 30
QR codes .................................................................................................................................... 30
-4 -
Welcome
Thank you for chosen Ontech GSM 9040/50. We hope you will be satisfied with the product and that it will be a good help for you. This manual covers all you have to know about the product. If you want
a more comprehensive manual, we recommend the “Quick Start Guide” which was delivered with
the product.
This manual
This manual is not printed by us but is published on our web site. If you which to have a printed version, you can easily download and print the document. In order to make this easy the paper size is A4.
Text styles
This manual uses text styles as below:
Text in SMS is written with bold style and grey background. Example: 1234*1*1#8# In examples of SMS messages in this manual, all text strings will start with 1234 but when
you send your text messages you shall use your Password. See below.
Buttons to press in the Apps will be shown in bold italic style. Example: UPDATE Functions will be shown in italic style. Example: Thermostat
Support
If you need support, contact our support by mail at support@ontechgsm.com.
Disclaimer
Onvako AB is not responsible for damages that may occur due to incorrect use or if the product does not work as desired.
-5 -
Overview
Ontech GSM 9040 is a removable unit that controls, alarms and monitors via the GSM mobile network. The unit is powered by 230 V and starts up automatically when it is plugged into a 230 V socket. The unit is also equipped with an internal backup battery. All communication with the unit is handled with SMS. In the Android app the SMS is sending and receiving in the background.
The unit has a 230 V outlet that can be turned on and turned off remotely. When it is turned
on it can be set to automatically be switched off after a set time between 1 second and 99 hours. It can also be set to switch on when an alarm sensor is activated, the Auto Relay function. A special function, the Garage Opener switch on the 230V for one second if the incoming call matches a mobile number that is pre-set to the user list in the Garage Opener function.
The unit has two wired alarm inputs. They can be set to opening (Normally Closed, NC) or
closing (Normally Open, NO) function. All types of alarm sensors with either closing or opening function can be connected to the unit. For example fire alarms, PIR, magnet switches, level guards etc. The unit sends an SMS to all mobile numbers on the Alarm list. Up to 9 different mobile numbers can be programmed in the Alarm list.
The unit has a built-in temperature sensor that has an accuracy of +/- 2 degrees C when the
230 V outlet switch is turned off. At request the temperature is reported. If a radiator is connected to the outlet 230 V the unit can be used to regulate the temperature in the room with the Thermostat function.
The unit can be set to alarm if the temperature is rising above or drop below a preset
temperature value. This temperature alarm can also be combined with the Auto Relay function so the 230 V outlet switches on if there is a temperature alarm.
The unit is equipped with a backup battery. The purpose of this is to send an alarm if the
main power fails. This alarm can be set with a delay of up to 40 minutes. If the main power is restored within the set delay, there will be no alarm sent. When the main power returns after an alarm a message about this will be sent from the unit.
The unit can be updated to the latest firmware by downloading it from www.ontechgsm.com
and connect the unit with your computer with the cable attached.
Ontech IR Controller 9050 is a package containing one Ontech GSM 9040 and an Ontech IR Eye 9016 (see below). These products connected is used to remote control air pumps for cooling and heating with the Ontech app. It is like you have your IR Remote Control for the air pump in you smartphone instead of the physical remote control. All major manufacturer of air pumps are supported.
Accessories
Ontech GSM 9040 is equipped with a short range radio in the 2.4 GHz frequency band. This is used for wireless communication with different accessories. Up to 7 wireless accessories can be connected with a unique identity, which means they can be separately operated. The working range is about 30 meters in free field, this is often enough in a normal sized one-family house. At the present the following accessories are available:
-6 -
Ontech Relay 9015. This is an extra relay which is connected to a wall socket and it has a 230
V outlet that can be controlled through Ontech GSM 9040 (the master unit). In every Ontech Relay 9050 there is two wired alarm inputs that can be set to operate with either Normally Open or Normally closed function. There are also a temperature sensor and the software supports temperature reporting, temperature alarms and thermostat function.
Ontech Alarmbox 9012 is a small battery powered unit containing a magnetic switch that
sends an alarm if the magnetic switch is activated. The unit also has a wired input that can be connected to alarm sensors with either Normally Open or Normally closed function. Different types of alarm sensors can be connected, for example fire alarms, PIR, magnet switches, level guards etc. Either the magnetic switch or the wired inputs can be used. It also has a built in temperature sensor that upon request reports the temperature. The battery will work for approximately 3 years with normal use and the unit will also warn when the battery level is low.
External temperature sensor 9901
An external temperature sensor (not included) can be connected in the Temp input contact on the bottom side. The unit can be set to use either the internal temperature sensor or the external temperature sensor to control the temperature alarm or the Thermostat function see Set functions on page 14). The status message will show the value from both temperature sensors. The cable is 2 meters but can easily be extended up to ten meters.
Ontech IR Eye 9016
The Ontech IR Eye 9016 is a small IR transmitter connected with a 1,5 meter long cord to Ontech GSM 9040. It is mounted on the wall in the same room as the air pump. Then the air pump can be controlled from the Ontech apps for Android or Iphone. The function is to pre heat or cool it down before arriving to your house. Together with the other functions in Ontech GSM 9040 it gives you full control over the heating in your house, including thermostat and temperature alarms and power break alarms.
-7 -
Get started
Content in the package
The package contains
Ontech GSM 9040 with antenna Alarm cable Quick Start Guide Programming USB cable IR Eye 9016 (only in package Ontech IR controller 9050)
Start up the unit the first time
SIM-card
The unit needs a SIM-card that works in the GSM (2G) mobile network.
The size is a mini-SIM card. This card is approximately 25*15 mm. Also the size called micro-SIM can be used if a mini-SIM adapter is used.
It is important that the pin code function is disabled on the SIM-card. A pin code is often activated by the network operator. Deactivate the pin code in a mobile telephone. Se the manual for the telephone.
Some prepaid SIM cards has a voice message that is played the first time the SIM-card is used. This message is blocking all the SMS function in Ontech GSM 9040 and must be removed. Put the SIM— card in a mobile phone and make a voice call that is answered and the voice message is removed.
Prepaid SIM-cards can be used. Have in mind that it is only valid for a certain period of time if it is not used and not refilled. It can also use up all money and then the Ontech GSM 9040 cannot send any message or alarm. We strongly recommend that you register the prepaid SIM-card at the network operator´s web site so you can handle the card via Internet.
Connect the unit and turn it off
The unit starts up when it is connected to a 230 V power socket. The green LED will blink for approximately 15 seconds and then it connects to the GSM network the LED is constant shining green. Position the unit so the text on the front is correctly oriented, if not the temperature measurements might be affected.
If the main power is broken the internal backup battery will continue to power the unit. After one minute a message will be sent to all mobile numbers on the Alarm list saying the main power fails (se Power fail alarms on page 21). To switch of the unit, disconnect from the main power and push the button for approximately 30 seconds.
Program you password
You must decide a Password that is used every time you communicate with the unit. The reason is that no unauthorized person shall be able to use the unit. The Password contains of four digits.
1. Put the SIM-card in the unit. Position it as the drawing below shows.
2. Connect the unit to a 230 V wall socket. The green LED will blink for approximately 15
seconds and then after connecting to the GSM network the LED is steady green.
3. Send an SMS with four digits (your Password).
-8 -
4. You will receive an SMS that tells you that the Password setting has succeeded. If not, see
the trouble shooting chapter in this manual.
The unit is now ready for use.
Change password
If you want to change your Password, do as follows:
1. Send an SMS to the unit with the following message: 1234#8*8*5678# (1234= old Password,
4567 =new Password)
2. Do not forget to change the Password in the Android or Iphone app if you use such to
operate your Ontech GSM 9040.
-9 -
Loading...
+ 21 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use