T Series
2/4-Channel High-Performance Amplifier Platform with DSP and Dante™
The T Series is a very exible and
cost effective amplier platform
loudspeaker processor. The
range consists of 2 and 4
channel models supporting
channel powers from 750 W
to 3000W.
All models deliver the same
high peak voltage allowing
high SPL with single 8/16 ohm
cabinets on all models. The
high voltage is also good for
sharing power between the
channels for applications such
as bi-amped loudspeakers or
subwoofers with passive tops.
The ampliers feature input via
Dante, AES3 and analog. The
Dante and AES3 solutions are
optimized for daisy-chained
distribution of 2-channel
audio for distribution to many
ampliers without the need for
external switches/repeaters/
splitters. A simple Dante
system has a daisy chain with
the mixing console at one end
and a WiFi access point at the
other end and the ampliers
in-between.
The loudspeaker processing
sets a new benchmark for
cost-effective amplication
for small and medium sized
systems and stage monitors.
The T Series can be controlled
and congured in different
ways.
• Full control with a PC
running Armonía. Here it
can be in mixed groups with
advanced EQ together with
other Powersoft products.
• Control from the front panel
display for things like preset
recall (also per output), gain,
delay, mute. This makes it
very easy to use for small
systems in a rental company.
The display also shows the
available headroom with easy
to read numbers in dB as well
as other status monitoring.
• Web app. Use any device
with a browser (e.g. a tablet)
and access the amplier via
an external WiFi access point
to control EQ etc.
Group controllable advanced EQ
with raised cosine lters
Large preset library
Preset compatibility with X Series
Very long FIR lters (42.6 ms)
Data are subject to change without notice
© 2018 Powersoft | All right reserved
DO000241.00_R00_powersoft_series_DS
T Series
2/4-Channel High-Performance Amplifier Platform with DSP and Dante™
Specifications
Channel Handling
T302 - T602 T304 - T604
Number of output channels
Number of input channels
Analog
Digital
2 (2 Speakon NL4) 4 (2 Speakon NL4)
(bridgeable per channel pair)
2 XLR (female)
2 XLR LINK (male)
AES3 - 1 XLR (female)
LINK - 1 XLR (male)
4 XLR (female)
Audio
Gain
Input sensitivity @ 8 Ω 32 dB 2.57 2.57 2.57 2.57 Vrms
S/N (20 Hz - 20 kHz @ 8 Ω) >110 >110 >110 >110 dB(A)
Max input level 24 dBu
Frequency Response 20 Hz - 20 kHz +/-0.5 dB
Crosstalk (1 kHz) <-70 dB
Input impedance 20kΩ Balanced
CMRR >65 dB
THD+N (from 0.1 W to Half Power) < 0.1% (typical < 0.05%)
SMPTE IMD (from 0.1 W to Half Power) < 0.1% (typical < 0.05%)
Output impedance at 100 Hz 26 mΩ
T302 T602 T304 T604
DSP
AD converters
DA converters
Sample rate converter
Internal precision 32 bit oating point
Latency 2.5 ms xed latency architecture
Memory/Presets 256 MB (RAM) plus 512 MB ash for presets
Delay 2 s (input) + 100 ms (output) for time alignment
Equalizer
Crossover
Limiters TruePower™, RMS voltage, RMS current, Peak limiter
Damping control
Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
24 Bit Tandem™ @ 48 kHz
125 dB-A Dynamic Range - 0.005 % THD+N
24 Bit Tandem™ @ 48 kHz
117 dB-A Dynamic Range - 0.003 % THD+N
24 Bit @ 44.1 kHz to 192 kHz
140 dB Dynamic Range - 0.0001 % THD+N
Raised-cosine, custom FIR, parametric IIR:
peaking, hi/lo-shelving, all-pass,
band-pass, band-stop, hi/lo-pass
linear phase (FIR), Butterworth,
Active DampingControl™ and
LiveImpedance™ measurement
Output Stage T302 T602 T304 T604
per channel @ 8 Ω (symmetrical)* 1200 W 1300 W 750 W 1250 W
per channel @ 4 Ω (symmetrical)* 1500 W 2500 W 750 W 1500 W
per channel @ 2 Ω (symmetrical)* 1500 W 3000 W 750 W 1500 W
per channel @ 8 Ω (asymmetrical)** 1300 W 1400 W 1200 W 1250 W
per channel @ 4 Ω (asymmetrical)** 2200 W 2500 W 1200 W 2100 W
per channel @ 2 Ω (asymmetrical)** 1600 W 3800 W 1200 W 1600 W
Maximum output power
@ 4 Ω Bridged 3000 W 6000 W 1500 W 3000 W
@ 8 Ω Bridged 3000 W 5000 W 1500 W 3000 W
Maximum unclipped output voltage 145 V
Maximum output current 50 A
*Calculated by driving and loading symmetrically all the channels.
**Calculated by driving all channels, but with every second channel at -6dB
Power & Thermal
Standby Power 13.5 15 15 15 W
Idle Power 23 32 32 32 W
1/8
@ 120 V
Power
@ 4Ω
Standby Power 14 16 16 16 W
Idle Power 23 32 32 32 W
1/8
@ 230V
Power
@ 4Ω
Power supply Universal regulated switch mode with PFC, SRM
Nominal voltage (±10%) 100-240 VAC @ 50-60Hz
Operating Voltage 90-264 VAC @ 50/60 Hz
AC Mains connector
Power 517 824 532 1054 W
Current Draw 4.6 7.6 4.7 9.5 A
Thermal Loss 485 678 537 1039 BTU/h
Power 527 839 525 1027 W
Current Draw 2.7 4.3 2.7 5.2 A
Thermal Loss 517 731 512 944 BTU/h
T302 T602 T304 T604
region-specic power cord provided
145 V
peak
100 A
peak
IEC C20 inlet (20 A max)
peak
peak
145 V
50 A
peak
peak
145 V
Networking
Standards compliance auto sensing Gigabit Ethernet IEEE 802.3ab
Supported topologies Star
Remote interface Armonía Pro Audio Suite™
Construction T302 T602 T304 T604
Dimensions 484 x 405 x 44.5 mm (19 x 16 x 1.75 in)
Weight 6.7 kg 7.5 kg 7.1 kg 7.5 kg
50 A
peak
peak
rms
rms
Powersoft S.p.A.
Via Enrico Conti, 5 - 50018 Scandicci (FI) Italy
Tel: +39 055 735 0230 - Fax: +39 055 735 6235
www.powersoft-audio.com
2 Channel - T302, T602
4 Channel - T304. T604
Loading...