On-Stage MY800 User Manual

MY800
Quick-Release Stereo Mic Bar

Congratulations on your purchase of the MY800 Quick-Release Stereo Mic Bar!

We hope you enjoy your new purchase.

UM-88 female/female adapter

UM-99 male/male adapter

Components Included:

middle mounting post side mount post

1 UM-01 ball joint with 5/8 female threading

1 middle mounng post
2 side mount posts
4 pull-back connectors
4 oversized posioning washers
1 UM-88 female/female adapter
1 UM-99 male/male adapter

pull-back connector

oversized washer

UM-01 ball joint

Easy Assembly

1. Using its oversized knob, temporarily tighten the 360° ball

joint so it does not rotate. Make sure the ball joint is securely
threaded to the middle mounting post.

2. Attach the mounting post to the quick release pull-back

connector. Do so by pulling back on the spring-loaded release
collar and inserting the stem end of the mounting post.

3. Pull back and assemble to desired congurations.

(See back for popular techniques.)

Additional Components Sold Separately:

REGISTER ONLINE. HERE’S WHY:

Lightning Fast Service - Get the fastest turn-around

in the unlikely event of a warranty claim.

Product Notications - We can contact your directly
with product notications and safety information.

MM-01

©2017 The Music People | On-Stage.com

UM-01

UM-88

UM-97 UM-99

Better Products - Your registration helps us to
improve our products and develop new ones.

Questions or Concerns? Contact the Customer Service Department
at [e-mail] or call us at [phone].

Get creative!

MY800 | MIC CONFIGURATIONS

AB - Two mics, typically omni directional positioned parallel to each other about 12" apart.

Blumlein - Two bidirectional mics, one on top of the other at a 90° angle to each other.

Din - Two directional mics angled at 90° with the capsules about 7"- 8" apart.

M-S - One directional mic faced forward, one Figure 8 microphone, faced sideways on top

of the other at a 90° degree angle to each other.

NOS - Two directional mics angled at 90° with the capsules about 12" apart.

O.R.T.F. - Two directional mics angled at 110° with the capsules about 7” apart.

XY - Two directional mics, one on top of the other at a 90°- 135° angle to each other.

NOS, DIN, or O.R.T.F

Blumlein, M-S, and XY

Run XY, NOS, AB, DIN, or O.R.T.F

all at the same time!

NOS and O.R.T.F.XY

AB or NOS