Page 1
ASSEMBLY INSTRUCTIONS
(For Models KS8190, KS8191, KS8390, KS8391, KS8200, KS8290, KS8291)
IMPORTANT: Tighten the fasteners as directed
in each step.
Before assembly, set disk clutch in middle
position for ease of setup and balance of stand.
(as shown).
1
Take bottom right foot with Yellow sticker and
fit it on the X-leg. Line up the Yellow sticker on
foot with Yellow sticker on X-leg. Secure in place
with fastener. Leave stand in the upright position
to complete assembly.
2
Take bottom left foot with Green sticker and
fit it on the X-leg. Line up the Green sticker on
foot with Green sticker on X-leg. Secure in place
with fastener.
DOUBLE-X MODELS ONLY: Repeat steps 1
and 2 for the rear X-leg. Continue to Step 3.
4
Blue
Green
Orange
Yellow
3
3
Take top right arm with Orange sticker and fit
it on the X-leg. Line up the Orange sticker on
arm with Orange sticker on X-leg. Secure in
place with fastener.
Take top left arm with Blue sticker and fit it
4
on the X-leg. Line up the Blue sticker on arm
with Blue sticker on X-leg. Secure in place with
fastener.
www.onstagestands.com
www.musicpeopleinc.com
2
1
IMPORTANT NOTE:
The FRONT SET of
X-legs on all Double X
models has the disk
clutch.
© 2003 TMP, Inc.
Loading...