ASSEMBLY INSTRUCTIONS
Congratulations on your
purchase of the GS7561
Foldable 5-Guitar Rack.
Please read the following
assembly instructions carefully.
We hope you enjoy your
new purchase!
Parts
Remove all parts from boxes and identify:
GS7561
FOLDABLE
5
Guitar
Rack
FOLDABLE
5
Guitar
Rack
B
Left Foot
(Qty 1)
A
Right Foot
(Qty 1)
G
Vertical
Supports
(Qty 2)
C
Upper Yokes
(Qty 1)
D
Dividers
(Qty 4)
E
Front Crossbar
(Qty 1)
F
Rear Crossbar
(Qty 1)
H
Tapping Screw
(Qty 8)
I
Short machine screw
(Qty 2)
J
Long machine screw
(Qty 2)
J
Flat Washer
(Qty 4)
K
Hex Locking Nut
(Qty 2)
Hardware
Remove all parts from hardware bag and identify:
®
Additional
Tools needed
Phillips-head
screw driver
Adjustable Wrench
Assemble the Bottom Braces
1. Attach Right Foot (A) to Front Support Bar (E)
using two tapping Screws (H), as shown. Repeat
for rear Support Bar (F). DO NOT fully tighten at
this time.
*NOTE: Assemble Front and Rear Crossbars with
divider holes facing towards the front of the stand.
2 Attach Left Foot (B) to the opposite side of
the Front Crossbar (E) using two tapping Screws
(H). Repeat for Rear Crossbar (F).
DO NOT fully tighten at this time.
3.
Assemble the
Vertical Supports
4. Attach the two Vertical Supports
(G) to the top of the feet using one
washers (Part J), and one Hex Locking
Nut (K) for each side, as shown.
DO NOT fully tighten at this time.
Assemble the Upper Yokes
5. Attach the two Vertical Supports to the Upper
Yokes (C) using one long machine Screw (J) per side,
as shown.
®
WARRANTY/COMPANY INFORMATION
LIMITED 3 YEAR WARRANTY
This stand comes with a Limited 3 Year Warranty to the original purchaser against defects in
materials and workmanship. This Warranty excludes defects due to normal wear, abuse,
shipping damage, failure to use the product in accordance with reasonable conduct, or
failure to use the product in accordance with the appropriate application as described in the
product description. Other restrictions or limitations, not expressly written, may exclude
your product from warranty. On-Stage Stands will not be liable for damages based upon
inconvenience, loss of use, loss of time, other commercial loss, or any other damages,
whether incidental, consequential or otherwise.
REGISTER ONLINE. HERE’S WHY:
Lightning Fast Service - Get the fastest turn-around in the
unlikely event of a warranty claim.
We can contact your directly with
product notifcations and safety information.
Better Products - Your registration helps us to improve our
products and develop new ones.
On-Stage.com
© 2015 TMP, Inc.
on-stage.com
Final Leveling
6.
all joints so the stand sits level and does not wobble. Tighten all screws to
make a solid, rigid unit.
Optional Steel Bar Dividers
7.
Bars that you can place in any of the avail-
your stand to hold acoustic and/or electric
guitars as needed.
MAX it out!
This stand was designed with 2 acoustic guitars and 3 electric guitars in
mind. But there are a number of other combinations, including:
3 Electric/Bass
2 Acoustic
4 Electric/Bass
1 Acoustic
3 Acoustic
5 Electric/Bass
Loading...