InTemp® CX402-TxM Data Logger
InTemp Bluetooth Low Energy Temperature (with Probe) Data Logger (CX402-TxM)
InTemp ® CX402-TXM (with Probe only) data loggers monitor
temperatures in refrigerators, freezers, and other temperaturecontrolled environments to comply with global GDP requirements.
The loggers communicate wirelessly via Bluetooth Low Energy to
mobile devices. Using the InTemp app, you can easily view data,
check logger status, set alarms, and create and share secure PDF
reports for streamlined reporting and regulatory compliance. All
loggers feature a built-in LCD display to view current and daily min
and max temperatures, advanced audible and visual alarm
capabilities for notification of temperature excursions, an internal
sensor for ambient temperature monitoring, and a single-point NIST
Certification of Calibration for both the logger body and probe.
With the optional CX Gateway, you can get remote notifications of
temperature excursions and automatically download data from
loggers within range of the device. Learn more about the CX
Gateway here.
Models are available with a 2- or 4-meter external temperature
probe for tracking actual refrigerator temperatures without Glycol
buffers or freezer applications.
Supported Measurements:
Temperature
www.onsetcomp.com/intemp • 1-800-LOGGERS (564-4377)
InTemp CX402-TxM Data Logger Specifications
Logger
Radio Power 1 mW (0 dBm)
Transmission Range Approximately 30.5 m (100 ft) line-of-sight
Wireless Data Standard Bluetooth Low Energy (Bluetooth Smart)
Logger Operating Range -30° to 70°C (-22° to 158°F), 0 to 95% RH (non-condensing)
Logging Rate 1 second to 18 hours
Time Accuracy ±1 minute per month at 25°C (77°F)
Battery Type Two AAA 1.5 V alkaline or lithium batteries, user-replaceable
Battery Life 1 year, typical with logging interval of 1 minute. Faster logging intervals, remaining connected with the
InTemp app, excessive report generation, numerous audible alarms, and paging all impact battery life.
Memory 128 KB (84,650 measurements, maximum)
Full Memory Download TimeApproximately 60 seconds; may take longer the farther the device is from the logger
LCD LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside
this range
Dimensions 9.4 x 4.5 x 2.59 cm (3.7 x 1.77 x 1.02 inches)
Weight 90.2 g (3.18 oz)
Environmental Rating IP54
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).
External Temperature Probe
Range -40° to 100°C (-40° to 212°F)
Accuracy ±0.5°C from -15° to 80°C (±0.9°F from 5° to 176°F)
±1.0°C from -40° to -15°C (±1.8°F from -40° to 5°F)
±0.7°C from 80° to 100°C (±1.3°F from 176° to 212°F)
Resolution 0.024°C at 25°C (0.04°F at 77°F)
Drift <0.1°C (0.18°F) per year
Cable Length 2 or 4 meter (6.56 or 13.12 feet) flat ribbon cable
Ambient Temperature Sensor
Range -30° to 70°C (-22° to 158°F)
Accuracy ±0.5°C from -15° to 70°C (±0.9°F from 5° to 158°F)
±1.0°C from -30° to -15°C (±1.8°F from -22° to 5°F)
Resolution 0.024°C at 25°C (0.04°F at 77°F)
Drift <0.1°C (0.18°F) per year