查询MRA4003供应商
MRA4003T3 Series
Surface Mount Standard
Recovery Power Rectifier
SMA Power Surface Mount Package
Features construction with glass passivation. Ideally suited for
surface mounted Automotive application.
• Compact Package with J−Bend Leads Ideal for Automated Handling
• Stable, High Temperature, Glass Passivated Junction
Mechanical Characteristics
• Case: Molded Epoxy
Epoxy meets UL 94 V−0 @ 0.125 in
• Weight: 70 mg (Approximately)
• Finish: All External Surfaces are Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 seconds in Solder Bath
• Polarity: Band in Plastic Body Indicates Cathode Lead
• Marking: MRA4003T3 = R13
Marking MRA4004T3 = R14
MRA4005T1 = R15
Marking: MRA4005T3 = R15
Marking: MRA4006T3 = R16
Marking: MRA4007T3 = R17
ORDERING INFORMATION
Device Package Shipping†
MRA4003T3 SMA 5000/Tape & Reel
MRA4003T3G SMA
(Pb−Free)
MRA4004T3 SMA 5000/Tape & Reel
MRA4004T3G SMA
(Pb−Free)
MRA4005T1 SMA 1500/Tape & Reel
MRA4005T3 SMA 5000/Tape & Reel
MRA4006T3 SMA 5000/Tape & Reel
MRA4007T3 SMA 5000/Tape & Reel
MRA4007T3G SMA
(Pb−Free)
†For information on tape and reel specifications, including part orientation and
tape sizes, please refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
5000/Tape & Reel
5000/Tape & Reel
5000/Tape & Reel
http://onsemi.com
STANDARD RECOVERY
RECTIFIERS
1.0 AMPERES
300−1000 VOLTS
CASE 403D
SMA
PLASTIC
MARKING DIAGRAM
R1x
ALYW
R1x = Specific Device Code
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
= Pb−Free Package
MAXIMUM RATINGS
Please See the Table on the Following Page
Semiconductor Components Industries, LLC, 2004
July, 2004 − Rev. 3
1 Publication Order Number:
MRA4003T3/D
MRA4003T3 Series
S
MAXIMUM RATINGS
Value
MRA4005T1,
Rating Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Avg. Rectified Forward Current
(At Rated V
, TL = 150°C)
R
Peak Repetitive Forward Current
(At Rated V
20 kHz, T
, Square Wave,
R
= 150°C)
L
Non−Repetitive Peak Surge Current
V
V
I
I
MRA4003T3 MRA4004T3
RRM
RWM
V
R
I
O
FRM
FSM
300 400 600 800 1000 Volts
(Surge applied at rated load conditions,
halfwave, single phase, 60 Hz)
Storage/Operating Case Temperature T
Operating Junction Temperature T
stg
, T
J
C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously . If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Characteristic Symbol Value Unit
Thermal Resistance, Junction−to−Lead (Note 1)
Thermal Resistance, Junction−to−Ambient (Note 2)
ELECTRICAL CHARACTERISTICS
Characteristic Symbol
Maximum Instantaneous Forward Voltage (Note 3)
(I
= 1 A)
F
(I
= 2 A)
F
Maximum Instantaneous Reverse Current (at rated DC voltage) I
1. Minimum Pad Size
2. 1 inch Pad Size
3. Pulse Test: Pulse Width ≤ 250 µs, Duty Cycle ≤ 2%.
MRA4005T3
MRA4006T3 MRA4007T3
1 Amp
2 Amps
30 Amps
−55 to 150 °C
−55 to 175 °C
R
θ
JL
R
θ
JA
16.2
88.3
Value
TJ = 25°C TJ = 100°C
V
F
R
1.1
1.18
1.04
1.12
10 50 A
Unit
°C/W
Unit
Volts
10
100E−6
TJ = 150°C
TJ = 150°C
10E−6
1.0
1.0E−6
−40°C
100E−9
0.1
10E−9
, REVERSE CURRENT (AMPS)
R
100°C 25°C
0.01
, INSTANTANEOUS FORWARD CURRENT (AMP
VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
F
I
Figure 1. Typical Forward Voltage
I
1.0E−9
1.21.00.80.60.4
VR, REVERSE VOLTAGE (VOLTS)
Figure 2. Typical Reverse Current
100°C
25°C
400350300250200150100500
http://onsemi.com
2
MRA4003T3 Series
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
, AVERAGE FORWARD CURRENT (AMPS)
O
I
0
dc
Square Wave
Ipk/IO =
5
10
20
Freq = 20 kHz
80
TL, LEAD TEMPERATURE (°C)
Figure 3. Current Derating per Leg
100
10
1601401201006040200
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
, AVERAGE POWER DISSIPATION (WATTS)
0.2
FO
0
P
TJ = 25°C
dc
Square Wave
Ipk/IO =
5
10
20
2.01.51.00.50
IO, AVERAGE FORWARD CURRENT (AMPS)
Figure 4. Forward Power Dissipation per Leg
1.0
0.1
0.01
(NORMALIZED)
0.001
r(t), TRANSIENT THERMAL RESISTANCE
C, CAPACITANCE (pF)
1
1E−3
VR, REVERSE VOLTAGE (VOLTS)
Figure 5. Capacitance
R
(Min Pad Board)
JL
10E−3100E−610E−6
t, TIME (s)
Figure 6. Thermal Response
160140120100806040200
R
= R
JL(t)
* r(t)
JL
1E+0100E−3 10E+0 100E+0
200180
R
(1 inch Pad Board)
JA
1E+3 10E+3
http://onsemi.com
3
MRA4003T3 Series
PACKAGE DIMENSIONS
SMA
PLASTIC PACKAGE
CASE 403D−02
ISSUE A
S
A
DB
POLARITY INDICATOR OPTIONAL
AS NEEDED
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 403D−01 OBSOLETE, NEW STANDARD IS
403D−02.
DIM MIN MAX MIN MAX
A 0.160 0.180 4.06 4.57
B 0.090 0.115 2.29 2.92
C 0.075 0.095 1.91 2.41
D 0.050 0.064 1.27 1.63
H 0.002 0.006 0.05 0.15
J 0.006 0.016 0.15 0.41
K 0.030 0.060 0.76 1.52
S 0.190 0.220 4.83 5.59
MILLIMETERSINCHES
C
K
J
H
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
MRA4003T3/D
4
Loading...