ON Semiconductor LM258, LM358A, LM2904, LM2904A, LM2904V Technical data

现货库存、技术资料、百科信息、热点资讯，精彩尽在鼎好!

LM258, LM358, LM358A,
LM2904, LM2904A,
LM2904V, NCV2904

Single Supply Dual
Operational Amplifiers

Utilizing the circuit designs perfected for Quad Operational
Amplifiers, these dual operational amplifiers feature low power drain,
a common mode input voltage range extending to ground/V
single supply or split supply operation. The LM358 series is
equivalent to one−half of an LM324.

These amplifiers have several distinct advantages over standard
operational amplifier types in single supply applications. They can
operate at supply voltages as low as 3.0 V or as high as 32 V, with
quiescent currents about one−fifth of those associated with the
MC1741 (on a per amplifier basis). The common mode input range
includes the negative supply, thereby eliminating the necessity for
external biasing components in many applications. The output voltage
range also includes the negative power supply voltage.

Features

• Short Circuit Protected Outputs

• True Differential Input Stage

• Single Supply Operation: 3.0 V to 32 V

• Low Input Bias Currents

• Internally Compensated

• Common Mode Range Extends to Negative Supply

• Single and Split Supply Operation

• ESD Clamps on the Inputs Increase Ruggedness of the Device

without Affecting Operation

• Pb−Free Packages are Available

• NCV Prefix for Automotive and Other Applications Requiring Site

and Control Changes

EE

, and

http://onsemi.com

PDIP−8

N, AN, VN SUFFIX

8

1

8

1

8

1

PIN CONNECTIONS

1

Output A

2

Inputs A

VEE/Gnd

ORDERING INFORMATION

See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.

−

+

3

4

(Top View)

CASE 626

SOIC−8

D, VD SUFFIX

CASE 751

Micro8]

DMR2 SUFFIX

CASE 846A

8

V

CC

7

Output B

6

−

Inputs B

+

5

© Semiconductor Components Industries, LLC, 2006

June, 2006 − Rev. 22

DEVICE MARKING INFORMATION

See general marking information in the device marking
section on page 11 of this data sheet.

1 Publication Order Number:

LM358/D

3.0 V to V

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

CC(max)

Single Supply Split Supplies

Q19

1

2

Q16

V

CC

VEE/Gnd

Q15

Figure 1.

Q14

40 k

Q13

V

CC

1

1.5 V to V

2

1.5 V to V

V

EE

Bias Circuitry

Common to Both

Output

Amplifiers

Q22

CC(max)

EE(max)

V

CC

Inputs

Q2

Q18

Q17

Q3 Q4

5.0 pF

Q20

Q21

Q12

25

Q11

Q9

Q7

Q6

Q5

Q8

Q26

Figure 2. Representative Schematic Diagram

(One−Half of Circuit Shown)

Q10

Q1

Q24

Q23

Q25

2.4 k

2.0 k

VEE/Gnd

http://onsemi.com

2

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

MAXIMUM RATINGS (T

Power Supply Voltages

Single Supply
Split Supplies

Input Differential Voltage Range (Note 1) V

Input Common Mode Voltage Range (Note 2) V

Output Short Circuit Duration t

Junction Temperature T

Thermal Resistance, Junction−to−Air (Note 3) Case 846A

Storage Temperature Range T

ESD Protection at any Pin

Human Body Model
Machine Model

Operating Ambient Temperature Range

= +25°C, unless otherwise noted.)

A

Rating

LM2904/LM2904A

LM2904V, NCV2904 (Note 4)

Case 751
Case 626

LM258

LM358, LM358A

Symbol Value Unit

Vdc

V

CC

VCC, V

IDR

ICR

SC

R



EE

J

JA

32

±16

±32 Vdc

−0.3 to 32 Vdc

Continuous

150 °C

238

°C/W
212
161

stg

V

esd

−65 to +150 °C

2000

200

T

A

−25 to +85
0 to +70

−40 to +105

−40 to +125

V

°C

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.

1. Split Power Supplies.

2. For supply voltages less than 32 V the absolute maximum input voltage is equal to the supply voltage.

3. All R

4. NCV2904 is qualified for automotive use.

measurements made on evaluation board with 1 oz. copper traces of minimum pad size. All device outputs were active.



JA

http://onsemi.com

3

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

ELECTRICAL CHARACTERISTICS (V

= 5.0 V, VEE = GND, TA = 25°C, unless otherwise noted.)

CC

LM258 LM358 LM358A

Characteristic

Input Offset Voltage

= 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V,

V

CC

] 1.4 V, RS = 0 

V

O

Symbol

V

Min Typ Max Min Typ Max Min Typ Max

IO

Unit

mV

TA = 25°C − 2.0 5.0 − 2.0 7.0 − 2.0 3.0
TA = T
TA = T

Average Temperature Coefficient of Input Offset

(Note 5) − − 7.0 − − 9.0 − − 5.0

high

(Note 5) − − 7.0 − − 9.0 − − 5.0

low

VIO/T

− 7.0 − − 7.0 − − 7.0 −

V/°C

Voltage

TA = T

Input Offset Current I

TA = T

Input Bias Current I

TA = T

Average Temperature Coefficient of Input Offset

high

high

high

to T

(Note 5)

low

to T

(Note 5) − − 100 − − 150 − − 75

low

to T

(Note 5) − −50 −300 − −50 −500 − −50 −200

low

IO

IB

IIO/T

− 3.0 30 − 5.0 50 − 5.0 30 nA

− −45 −150 − −45 −250 − −45 −100

− 10 − − 10 − − 10 − pA/°C

Current

TA = T

Input Common Mode Voltage Range (Note 6),

V

CC

VCC = 30 V, TA = T

Differential Input Voltage Range V

Large Signal Open Loop Voltage Gain A

RL = 2.0 k, VCC = 15 V, For Large VO Swing,
TA = T

high

= 30 V

high

to T

(Note 5)

low

high

to T

low

V

ICR

IDR

VOL

0 − 28.3 0 − 28.3 0 − 28.5 V

0 − 28 0 − 28 0 − 28

− − V

CC

− − V

CC

50 100 − 25 100 − 25 100 −

to T

(Note 5) 25 − − 15 − − 15 − −

low

− − V

CC

V

V/mV

Channel Separation CS − −120 − − −120 − − −120 − dB

1.0 kHz ≤ f ≤ 20 kHz, Input Referenced

Common Mode Rejection

CMR 70 85 − 65 70 − 65 70 − dB

RS ≤ 10 k

Power Supply Rejection PSR 65 100 − 65 100 − 65 100 − dB

Output Voltage−High Limit

= T

to T

T

A

high

(Note 5)

low

VCC = 5.0 V, RL = 2.0 k, TA = 25°C
VCC = 30 V, RL = 2.0 k
VCC = 30 V, RL = 10 k

Output Voltage−Low Limit V

V

OH

V

3.3 3.5 − 3.3 3.5 − 3.3 3.5 −
26 − − 26 − − 26 − −
27 28 − 27 28 − 27 28 −

OL

− 5.0 20 − 5.0 20 − 5.0 20 mV

VCC = 5.0 V, RL = 10 k,

= T

to T

T

A

high

Output Source Current I

(Note 5)

low

O+

mA

VID = +1.0 V, VCC = 15 V 20 40 − 20 40 − 20 40 −

high

to T

(LM358A Only) 10 − −

low

O−

TA = T

Output Sink Current I

VID = −1.0 V, VCC = 15 V 10 20 − 10 20 − 10 20 − mA

high

high

to T

(LM358A Only) 5.0 − − mA

low

− 40 60 − 40 60 − 40 60 mA

to T

(Note 5)

low

SC

I

CC

A

mA

TA = T
VID = −1.0 V, VO = 200 mV 12 50 − 12 50 − 12 50 −

Output Short Circuit to Ground (Note 7) I

Power Supply Current (Total Device)

= T

T

A

VCC = 30 V, VO = 0 V, RL = ∞ − 1.5 3.0 − 1.5 3.0 − 1.5 2.0
VCC = 5 V, VO = 0 V, RL = ∞ − 0.7 1.2 − 0.7 1.2 − 0.7 1.2

5. LM258: T
LM2904/LM2904A: T

NCV2904 is qualified for automotive use.

= −25°C, T

low

= +85°C LM358, LM358A: T

high

= −40°C, T

low

= +105°C LM2904V & NCV2904: T

high

= 0°C, T

low

high

= −40°C, T

low

= +70°C

high

= +125°C

6. The input common mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3 V. The upper end of
the common mode voltage range is V

7. Short circuits from the output to V
simultaneous shorts on all amplifiers.

− 1.7 V.

CC

can cause excessive heating and eventual destruction. Destructive dissipation can result from

CC

http://onsemi.com

4

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

ELECTRICAL CHARACTERISTICS (V

= 5.0 V, VEE = Gnd, TA = 25°C, unless otherwise noted.)

CC

LM2904 LM2904A LM2904V, NCV2904

Characteristic

Input Offset Voltage

VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V,

] 1.4 V, RS = 0 

V

O

Symbol

V

Min Typ Max Min Typ Max Min Ty p Max

IO

Unit

mV

TA = 25°C − 2.0 7.0 − 2.0 7.0 − − 7.0
TA = T
TA = T

Average Temperature Coefficient of Input Offset

(Note 8) − − 10 − − 10 − − 13

high

(Note 8) − − 10 − − 10 − − 10

low

VIO/T

− 7.0 − − 7.0 − − 7.0 −

V/°C

Voltage

TA = T

Input Offset Current I

TA = T

Input Bias Current I

TA = T

Average Temperature Coefficient of Input Offset

high

high

high

to T

(Note 8)

low

to T

(Note 8) − 45 200 − 45 200 − 45 200

low

to T

(Note 8) − −50 −500 − −50 −250 − −50 −500

low

IO

IB

IIO/T

− 5.0 50 − 5.0 50 − 5.0 50 nA

− −45 −250 − −45 −100 − −45 −250

− 10 − − 10 − − 10 − pA/°C

Current

TA = T

Input Common Mode Voltage Range (Note 9),

V
VCC = 30 V, TA = T

Differential Input Voltage Range V

Large Signal Open Loop Voltage Gain A

RL = 2.0 k, VCC = 15 V, For Large VO Swing,
TA = T

CC

high

= 30 V

high

to T

(Note 8)

low

high

to T

low

V

ICR

IDR

VOL

0 − 24.3 0 − 24.3 0 − 24.3 V

0 − 24 0 − 24 0 − 24

− − V

CC

− − V

CC

25 100 − 25 100 − 25 100 −

to T

(Note 8) 15 − − 15 − − 15 − −

low

− − V

CC

V

V/mV

Channel Separation CS − −120 − − −120 − − −120 − dB

1.0 kHz ≤ f ≤ 20 kHz, Input Referenced

Common Mode Rejection

CMR 50 70 − 50 70 − 50 70 − dB

RS ≤ 10 k

Power Supply Rejection PSR 50 100 − 50 100 − 50 100 − dB

Output Voltage−High Limit

= T

to T

T

A

high

(Note 8)

low

VCC = 5.0 V, RL = 2.0 k, TA = 25°C
VCC = 30 V, RL = 2.0 k
VCC = 30 V, RL = 10 k

Output Voltage−Low Limit V

V

OH

V

3.3 3.5 − 3.3 3.5 − 3.3 3.5 −
22 − − 22 − − 22 − −
23 24 − 23 24 − 23 24 −

OL

− 5.0 20 − 5.0 20 − 5.0 20 mV

VCC = 5.0 V, RL = 10 k,

= T

to T

T

A

high

Output Source Current I

(Note 8)

low

O+

20 40 − 20 40 − 20 40 − mA

VID = +1.0 V, VCC = 15 V

Output Sink Current I

O−

VID = −1.0 V, VCC = 15 V 10 20 − 10 20 − 10 20 − mA
VID = −1.0 V, VO = 200 mV − − − − − − − − −

Output Short Circuit to Ground (Note 10) I

Power Supply Current (Total Device)

= T

to T

T

A

high

(Note 8)

low

SC

I

CC

− 40 60 − 40 60 − 40 60 mA

A

mA

VCC = 30 V, VO = 0 V, RL = ∞ − 1.5 3.0 − 1.5 3.0 − 1.5 3.0
VCC = 5 V, VO = 0 V, RL = ∞ − 0.7 1.2 − 0.7 1.2 − 0.7 1.2

8. LM258: T
LM2904/LM2904A: T

NCV2904 is qualified for automotive use.

= −25°C, T

low

= +85°C LM358, LM358A: T

high

= −40°C, T

low

= +105°C LM2904V & NCV2904: T

high

= 0°C, T

low

high

= −40°C, T

low

= +70°C

high

= +125°C

9. The input common mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3 V. The upper end of
the common mode voltage range is V

10.Short circuits from the output to V
simultaneous shorts on all amplifiers.

− 1.7 V.

CC

can cause excessive heating and eventual destruction. Destructive dissipation can result from

CC

http://onsemi.com

5

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

CIRCUIT DESCRIPTION

The LM358 series is made using two internally
compensated, two−stage operational amplifiers. The first
stage of each consists of differential input devices Q20 and
Q18 with input buffer transistors Q21 and Q17 and the
differential to single ended converter Q3 and Q4. The first
stage performs not only the first stage gain function but also
performs the level shifting and transconductance reduction
functions. By reducing the transconductance, a smaller
compensation capacitor (only 5.0 pF) can be employed, thus
saving chip area. The transconductance reduction is
accomplished by splitting the collectors of Q20 and Q18.
Another feature of this input stage is that the input common
mode range can include the negative supply or ground, in
single supply operation, without saturating either the input
devices or the differential to single−ended converter. The
second stage consists of a standard current source load
amplifier stage.

Each amplifier is biased from an internal−voltage
regulator which has a low temperature coefficient thus
giving each amplifier good temperature characteristics as
well as excellent power supply rejection.

1.0 V/DIV

V
R
T

5.0 s/DIV

Figure 3. Large Signal Voltage

Follower Response

= 15 Vdc

CC

= 2.0 k

L

= 25°C

A

20

18

16

14

12

10

8.0

I

6.0

V , INPUT VOLTAGE (V)

4.0

2.0
0

0 2.0 4.0 6.0 8.0 10 12 14 16 18 20

Negative

Positive

V

POWER SUPPLY VOLTAGES (V)

CC/VEE,

Figure 4. Input Voltage Range Figure 5. Large−Signal Open Loop Voltage Gain

120

V

= 15 V

100

80

60

40

20

, OPEN LOOP VOLTAGE GAIN (dB)

0

VOL

A

−20

1.0 10 100 1.0 k 10 k 100 k 1.0 M

f, FREQUENCY (Hz)

CC

V

EE

T

= 25°C

A

= Gnd

http://onsemi.com

6

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

14

pp

12

10

8.0

6.0

4.0

, OUTPUT VOLTAGE RANGE (V )

2.0

OR

V

0

1.0 10 100 1000

f, FREQUENCY (kHz)

RL = 2.0 k
V

= 15 V

CC

V

= Gnd

EE

Gain = −100
RI = 1.0 k

= 100 k

R

F

Figure 6. Large−Signal Frequency Response Figure 7. Small Signal Voltage Follower

2.4

2.1

1.8

1.5

1.2

0.9

0.6

0.3

CC

I , POWER SUPPLY CURRENT (mA)

0

0 5.0 10 15 20 25 30 35

, POWER SUPPLY VOLTAGE (V) VCC, POWER SUPPLY VOLTAGE (V)

V

CC

TA = 25°C
R

= R

L

550

500

450

400

350

300

, OUTPUT VOLTAGE (mV)

O

250

V

200

0

0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0

Input

Output

t, TIME (ms)

Pulse Response (Noninverting)

90

80

IB

I , INPUT BIAS CURRENT (nA)

70

0 2.0 4.0 6.0 8.0 10 12 14 16 18 20

VCC = 30 V
V

= Gnd

EE

T

= 25°C

A

CL = 50 pF

Figure 8. Power Supply Current versus

Power Supply Voltage

Figure 9. Input Bias Current versus

Supply Voltage

http://onsemi.com

7

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

R1

50 k

V

V

CC

MC1403

R2

2.5 V

Figure 10. Voltage Reference

e

+

1

1/2

LM358

1

R

C

−

1/2

LM358

+

V

O

CC

= 2.5 V (1 +

R

R1
R2

V

V

ref

1

= V

2

ref

V

O

10 k

CC

)

Figure 11. Wien Bridge Oscillator

−

R1

a R1

−

1/2

LM358

e

o

+

b R1

−

1/2

LM358

e

2

+

1

R

C

R

R1

V

ref

V

in

eo = C (1 + a + b) (e2 − e1)

5.0 k

V

CC

−

1/2

LM358

+

R

R

C

C

R2

+

1/2

LM358

−

R1

V

=

inL

R1 + R2

R1

V

=

inH

R1 + R2

R1

H =

R1 + R2

V

− V

(V

OL

− V

(V

OH

(V

− VOL)

OH

V

O

1

fo =

2  RC

= 1.0 kHz

For: f

o

R = 16 k
C = 0.01 F

Hysteresis

V

OH

V

O

O

V

OL

)+ V

ref

ref

) + V

ref

V

inLVinH

V

ref

ref

Figure 12. High Impedance Differential Amplifier Figure 13. Comparator with Hysteresis

1

R

C1

V

in

R2

C

−

1/2

LM358

+

V

ref

R2

R1

R

V

ref

Bandpass

Output

−

1/2

LM358

+

R

100 k

C

100 k

R3

−

1/2

LM358

+

V

ref

Where:

−

1/2

LM358

+

V

ref

C1

TBP = Center Frequency Gain
T

= Passband Notch Gain

N

fo =

R1 = QR

R2 =

R3 = T

C1 = 10 C

For:

f

o

Q
T

BP

T

N

Notch Output

2 

RC

R1

T

BP

N R2

= 1.0 kHz
= 10
= 1
= 1

Figure 14. Bi−Quad Filter

V

ref

R

= 160 k

C

= 0.001 F

R1

= 1.6 M

R2

= 1.6 M

R3

= 1.6 M

1

=V

CC

2

http://onsemi.com

8

V

=V

ref

V

ref

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

V

CC

C

V

R1

in

R2

Given: fo = center frequency

Choose value f

1

CC

2

Triangle Wave

+

1/2

LM358

−

C

f =

Output

R1 + R

4 CRf R1

R2

300 k

R3

75 k

R1

V

R

f

C

100 k

ref

R3 =

R2 R1

R2 + R1

if,

+

1/2

LM358

−

Square
Wave
Output

Then: R3 =

R1 =

R2 =

For less than 10% error from operational amplifier.

Where f

and BW are expressed in Hz.

o

If source impedance varies, filter may be preceded with voltage
follower buffer to stabilize filter parameters.

R3

C

−

1/2

LM358

+

V

ref

A(f

) = gain at center frequency

o

, C

o

Q

 f

C

o

R3

2 A(f

)

o

R1 R3

2

4Q

R1 −R3

CO

CO = 10 C

1

V

=V

ref

2

Q

o fo

< 0.1

BW

V

O

CC

Figure 15. Function Generator

Figure 16. Multiple Feedback Bandpass Filter

http://onsemi.com

9

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

ORDERING INFORMATION

Device Operating Temperature Range Package Shipping

LM358ADR2G

LM358D SOIC−8 98 Units/Rail

LM358DG SOIC−8

LM358DR2 SOIC−8 2500 Tape & Reel

LM358DR2G SOIC−8

LM358DMR2 Micro8 4000 Tape & Reel

LM358DMR2G Micro8

LM358N PDIP−8 50 Units/Rail

LM358NG PDIP−8

LM258D

LM258DG SOIC−8

LM258DR2 SOIC−8 2500 Tape & Reel

LM258DR2G SOIC−8

LM258DMR2 Micro8 4000 Tape & Reel

LM258DMR2G Micro8

LM258N PDIP−8 50 Units/Rail

LM258NG PDIP−8

LM2904D

LM2904DG SOIC−8

LM2904DR2 SOIC−8 2500 Tape & Reel

LM2904DR2G SOIC−8

LM2904DMR2 Micro8 2500 Tape & Reel

LM2904DMR2G Micro8

LM2904N PDIP−8 50 Units/Rail

LM2904NG PDIP−8

LM2904ADMG Micro8

LM2904ADMR2 Micro8 4000 Tape & Reel

LM2904ADMR2G Micro8

LM2904AN PDIP−8 50 Units/Rail

LM2904ANG PDIP−8

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

0°C to +70°C

−25°C to +85°C

−40°C to +105°C

SOIC−8

(Pb−Free)

(Pb−Free)

(Pb−Free)

(Pb−Free)

(Pb−Free)

SOIC−8 98 Units/Rail

(Pb−Free)

(Pb−Free)

(Pb−Free)

(Pb−Free)

SOIC−8 98 Units/Rail

(Pb−Free)

(Pb−Free)

(Pb−Free)

(Pb−Free)

(Pb−Free)

(Pb−Free)

(Pb−Free)

2500 Tape & Reel

98 Units/Rail

2500 Tape & Reel

4000 Tape & Reel

50 Units/Rail

98 Units/Rail

2500 Tape & Reel

4000 Tape & Reel

50 Units/Rail

98 Units/Rail

2500 Tape & Reel

2500 Tape & Reel

50 Units/Rail

4000 Tape & Reel

4000 Tape & Reel

50 Units/Rail

†

http://onsemi.com

10

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

ORDERING INFORMATION

Device Operating Temperature Range Package Shipping

LM2904VD

LM2904VDG SOIC−8

LM2904VDR2 SOIC−8 2500 Tape & Reel

LM2904VDR2G SOIC−8

LM2904VDMR2 Micro8 4000 Tape & Reel

LM2904VDMR2G Micro8

LM2904VN PDIP−8 50 Units/Rail

LM2904VNG PDIP−8

NCV2904DR2* SOIC−8 2500 Tape & Reel

NCV2904DR2G* SOIC−8

NCV2904DMR2* Micro8 4000 Tape & Reel

NCV2904DMR2G* Micro8

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

*NCV2904 is qualified for automotive use.

−40°C to +125°C

SOIC−8 98 Units/Rail

98 Units/Rail

(Pb−Free)

2500 Tape & Reel

(Pb−Free)

4000 Tape & Reel

(Pb−Free)

50 Units/Rail

(Pb−Free)

2500 Tape & Reel

(Pb−Free)

4000 Tape & Reel

(Pb−Free)

†

MARKING DIAGRAMS

PDIP−8

AN SUFFIX

CASE 626

8

LM2904AN

AWL

YYWWG

1

VD SUFFIX

8

1

SOIC−8

CASE 751

2904V
ALYW

G

PDIP−8

VN SUFFIX

CASE 626

8

LM2904VN

AWL

YYWWG

1

*

8

LMx58N
AWL

YYWWG

1

8

LMx58

ALYW

G

1

PDIP−8
N SUFFIX
CASE 626

8

YYWWG

1

D SUFFIX
CASE 751

8

1

LM2904N
AWL

SOIC−8

LM358

ALYWA

G

8

2904

ALYW

G

1

Micro8

DMR2 SUFFIX

CASE 846A

8

x58

AYW G

G

1

x = 2 or 3
A = Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
G = Pb−Free Package
G = Pb−Free Package − (Note: Microdot may be in either location)

8

1

2904

AYW G

G

8

904A

AYW G

G

1

http://onsemi.com

11

8

1

904V

AYW G

G

*

*This diagram also applies to NCV2904

NOTE 2

SEATING
PLANE

−T−

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

PACKAGE DIMENSIONS

PDIP−8

N, AN, VN SUFFIX

CASE 626−05

ISSUE L

NOTES:

1. DIMENSION L TO CENTER OF LEAD WHEN

58

−B−

14

F

−A−
L

C

J

N

D

H

G

0.13 (0.005) B

K

M

M

A

T

M

M

2. PACKAGE CONTOUR OPTIONAL (ROUND OR

3. DIMENSIONING AND TOLERANCING PER ANSI

FORMED PARALLEL.

SQUARE CORNERS).

Y14.5M, 1982.

DIM MIN MAX MIN MAX

A 9.40 10.16 0.370 0.400
B 6.10 6.60 0.240 0.260
C 3.94 4.45 0.155 0.175
D 0.38 0.51 0.015 0.020
F 1.02 1.78 0.040 0.070
G 2.54 BSC 0.100 BSC
H 0.76 1.27 0.030 0.050
J 0.20 0.30 0.008 0.012
K 2.92 3.43 0.115 0.135
L 7.62 BSC 0.300 BSC
M −−− 10 −−− 10
N 0.76 1.01 0.030 0.040

INCHESMILLIMETERS

__

http://onsemi.com

12

−Y−

−Z−

B

H

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

PACKAGE DIMENSIONS

SOIC−8 NB

CASE 751−07

ISSUE AH

NOTES:

−X−
A

58

1

4

G

D

0.25 (0.010) Z

M

S

Y

0.25 (0.010)

C

SEATING
PLANE

SXS

M

Y

0.10 (0.004)

M

K

N

X 45

_

M

J

1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.

2. CONTROLLING DIMENSION: MILLIMETER.

3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.

4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.

5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.

6. 751−01 THRU 751−06 ARE OBSOLETE. NEW
STANDARD IS 751−07.

DIMAMIN MAX MIN MAX

B 3.80 4.00 0.150 0.157
C 1.35 1.75 0.053 0.069
D 0.33 0.51 0.013 0.020
G 1.27 BSC 0.050 BSC
H 0.10 0.25 0.004 0.010
J 0.19 0.25 0.007 0.010
K 0.40 1.27 0.016 0.050

M 0 8 0 8

N 0.25 0.50 0.010 0.020
S 5.80 6.20 0.228 0.244

MILLIMETERS

4.80 5.00 0.189 0.197

INCHES

____

SOLDERING FOOTPRINT*

1.52

0.060

7.0

0.275

0.6

0.024

*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.

4.0

0.155

1.270

0.050

SCALE 6:1

ǒ

inches

mm

Ǔ

http://onsemi.com

13

SEATING
PLANE

−T−

0.038 (0.0015)

PIN 1 ID

LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904

PACKAGE DIMENSIONS

Micro8t

CASE 846A−02

ISSUE G

DD

H

E

e

E

b

8 PL

0.08 (0.003) A

M

T

S

B

S

A

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.

2. CONTROLLING DIMENSION: MILLIMETER.

3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE
BURRS. MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED

0.15 (0.006) PER SIDE.

4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION.
INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE.

5. 846A−01 OBSOLETE, NEW STANDARD 846A−02.

DIMAMIN NOM MAX MIN

A1 0.05 0.08 0.15 0.002

b 0.25 0.33 0.40 0.010
c 0.13 0.18 0.23 0.005

D 2.90 3.00 3.10 0.114

E 2.90 3.00 3.10 0.114
e 0.65 BSC
L 0.40 0.55 0.70 0.016

H

E

MILLIMETERS

−− −− 1.10 −−

4.75 4.90 5.05 0.187 0.193 0.199

INCHES

NOM MAX

−− 0.043

0.003 0.006

0.013 0.016

0.007 0.009

0.118 0.122

0.118 0.122

0.026 BSC

0.021 0.028

A1

*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.

Micro8 is a trademark of International Rectifier.

c

L

SOLDERING FOOTPRINT*

8X

1.04

0.041

6X

3.20

0.126

0.65

0.0256

0.38

0.015

8X

4.24

0.167

SCALE 8:1

5.28

0.208

ǒ

inches

mm

Ǔ

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: [phone]

Japan Customer Focus Center

Phone: 81−3−5773−3850

http://onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local
Sales Representative

LM358/D

14