Onn ONK385-99 Operation Manual

ONK385-99

Karaoke
Compact Disc + Graphics
with built-in Disco Light

Karaoké
Compact Disque + Graphiqués
avec jeu de lumiè

Operation Manual
Manuel de fonctionnement

Operation Manual
Manuel de fonctionnement

WARNINGS

E1

ENGLISH

E1

WARNING: TO REDUCE THE RISK OF

FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: TO PREVENT THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
OR BACK. NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol is intended to alert you
to the presence of uninsulated
dangerous voltage within the
product's enclosure that might be of
sufficient magnitude to constitute a
risk of electric shock. Do not open
the product's case.

This symbol is intended to inform
you that important operating and
maintenance instructions are
included in the literature
accompanying this product.

DRIPPING WARNING

VENTILATION WARNING

Warning:

SAFETY CERTIFICATION

The product shall not be exposed to dripping or
splashing and that no objects filled with liquids, such
as vases, shallbe placed on the product.

The normal ventilation of the product shall not be
impeded for intended use.

Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.

This device is made and tested to meet safety
standards of the FCC, requirements and
compliance with safety performance of the U.S.
Department of Health and Human Services, and
also with FDA Radiation Performance Standards
21 CFR Subchapter J.

Main plug is used as disconnect device and it
should remain readily operable during intended
use. In order to disconnect the apparatus from the
mains completely, the main plug should be
disconnected from the main socket outlet
completely.

Warnings:

CAUTION!

!

!

!

This CD player employs a laser light beam.
Only a qualified service person should
remove the cover or attempt to service this
device, due to possible eye injury.
The use of controls, adjustments, or
procedures other than those specified
herein might result in hazardous radiation
exposure.

This compact disc player is classified as a
CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT label is
located on the rear panel.

Invisible laser radiation when open and inter
locks defeated.Avoidexposure to beam.

The apparatus shall be used in an open
area.

Since CD circuitry may cause interference to
other radio tuners nearby, switch this unit off
when not in use or move it away from the
affected radio tuner.

This device complies with part 15 of the FCC
rules, operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.

This class[B] digital apparatus complies with
canadian ICES-003.

CAUTION

FCC IMPORTANT

The CAUTION marking is located on the rear panel.

Class II equipment symbol

This symbol indicates that the unit
has a double insulation system.

ENGLISH

E2

WARNINGS

NOTE This digital apparatus does not exceedthe Class Blimits for radio noise emissions from digital apparatus as:

set out in the Radio Interference Regulations of Industry Canada These limits are designedto provide reasonable.
protection against harmful interference in aresidential installation This equipment generates usesand can radiate.,
radio frequency energy and if not installed and used in accordance with the instructions may cause harmful,,
interference to radio communications However there is no guarantee that interference will not occur in a particular.,
installation If this equipment does cause harmful interference to radio or television which can be determined by.(
turning the equipment off the user is encouraged to try to correct the interference by one or more of the following),
measures:

Reorient or relocate thereceiving antenna.
Increase the separation betweenthe equipment and receiver.
Connect the equipment intoan outlet on acircuit different from that towhich the receiver isconnected.
Consult the dealer oran experienced radio TV technician for help/.

IMPORTANT SAFETY INSTRUCTIONS

!

!

!

!

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.

CONTROL LOCATIONS

E3

1. LED Display

2. CD Door

3. Master Volume Display

4. Master Volume Indicator

1.0 MASTER VOLUME Control

FRONT VIEW

2.1 PROGRAM Button

2.2 DISCO LIGHT Slide

Button

2.4 REPEAT LED

2.3 PROGRAM LED

2.5 Mic Holder

2.6 MIC Volume Control

2.7 ECHO Control

2. 28 MIC Jack
2 Disco Light9.

3.0 Loudspeaker

1. /1 ON OFF LED

5 REPE. AT Button
6 SKI. P Button
7 PL. AY/PAUSE Button
8 SKI. P Button
9 Disco Light.

1. /2 ON OFF Button

1.3 PLAY/PAUSE LED

1.4 CDG LED

1.5 Mic Holder

1.6 Auto Voice Control

1.7 BALANCE Control

1. 18 MIC Jack

1 R Button9 ANDOM.
20 STOP Button.

1919

2020

2323
2424

2525
2626

2727

2121
2222

2828

2929

1 2

8

3

4

5 6

7

9

10
1111

1212

1313
1414

1515
1616

1717
1818

3030

ENGLISH

E4

31. AUX OUT Jack (R)

32. VIDEO OUT Jack

33. AUX OUT Jack (L)

34. AC Power Cord

REAR VIEW

ENGLISH

31

32 33

34

MAKING THE CONNECTIONS

CONNECTING POWER

SELECTING YOUR KARAOKEAS YOUR SOURCE/INPUT

You can power the system from a standardAC outlet by using the
supplied power cord.

Your Karaoke is designed to connect to your TV the same way you would connect most video
cameras, VCR/DVD players or video game consoles.

We have provided RCA cables to connect your unit to a TV, VCR/DVD player, video device or an external
audio/sound system. The RCA cables have three connections at each end (white and red are for left and
right audio connections and the yellow is for video connection).

Please follow the steps below to display CD+G lyrics on theTV screen:

(1) Locatethe multi-colored patchcables
(2) Connectvideo cable (yellow)to the video out of the back of the Singing Machine
(3) Connect the other end of the video cable (yellow) to the video input on your TV or VCR/DVD

Player.

Selecting your Karaoke as a source/input on your TV is very similar to connecting a VCR/DVD or
Satellite system.

We’ve listed below the most common ways ofselecting the source from yourTV or VCR/DVDPlayer:

(1) In the set up menu of the TV or VCR/DVD player there may be an option for “Input Select” where

you can choose between “Cable/Ant., Video 1, Video 2, etc.” as the input source.

(2) Look for a TV channel between the highest and lowest on your TV or VCR/DVD player (i.e. AUX,

EXT, LINE 1 or LINE IN)

(3) Your remote control for either your TV or VCR/DVD player may have source input selections as

well as detailed below:
“VIDEO, VIDEO 1, GAME, AUX, EXT or LINE-IN.“ Choosing one of those in most cases should
display the lyrics from your Karaoke as well.

CAUTION: The supplied AC power cord has a polarized plug that fits into
the wall outlet only one way. If the plug does not fit properly, turn it over and
try again. Do not force it.

CONNECTING TOYOUR TV OR VCR/DVD PLAYER

E5

ENGLISH

REAR VIEW

VIDEO INPUT
(Yellow Jack)

VIDEO OUTPUT

(Yellow Jack)

VIDEO
INPUT

AUDIO
INPUT

RL

REAR VIEW OF TV OR VCR

AUDIO CONNECTION

Please follow the steps below to connect the unit to yourTV or VCRor home stereo system:

(1) Locate themulticolored patch cords.
(2) Connect audio cables (White and Red) to the Audio Out of the back of

the .

(3) Connect the other end of the audio cables to the audio/auxiliaryinput on your TV or VCR or home

stereo system.

(White-Left and Red-Right)

Karaoke

MAKING THE CONNECTIONS

E6

REAR VIEW

Home Stereo System

AUX OUTPUT

R

(Red Jack)

VIDEO
INPUT

AUDIO
INPUT

RL

REAR VIEW OF TV OR VCR

OR HOME STEREO SYSTEM

AUX OUTPUT

L

(White Jack)

AUX INPUT

R

(Red Jack)

AUX INPUT

L

(White Jack)

ENGLISH

This unit isdesigned to play CDs and CD+Gsbearing the identification logo . If thedisc does not
conform to the standard, it may not play properly.

respectively

To turn on the unit, press the ON/OFF button, the ON/OFF LEDIndicator will light up.
To turn it off, press theON/OFF button again, the ON/OFF LED Indicator will turn off.

Open the CD door, place a CD or CD+G disc in the compartment with the printed side facing upward and
the shiny side facing down.
Gently close the CD door. The unit will start to play the first track automatically. (If no disc is loaded, it will
display “ ”. If a CDG is loaded, the CDG indicator will light up.)

Adjust MASTER VOLUME control on your unit, TV or audiosystem to a comfortable level.
To start playing, press the PLAY/PAUSE button. The first track [ ] and the PLAY/PAUSE LED will be lit.
To temporarily stop playing, press the PLAY/PAUSE button.The PLAY/PAUSE LED Indicatorwill flash.
To resume play, press thisbutton again.

If the STOP button is pressed in the course of playing, thedisc will cease to play. (The total number of tracks
will be shown on the LED window.)

Rotate to the MASTER VOLUME control to obtain the desired sound level.

You can always skip forward or back to your desired track number by pressing the SKIP buttons

SKIP

When playing any audio CD, press and hold the SKIP button ( -SKIP- ). The CD will search at high
speed in the forward or backward direction. Normal play will continue when you release the button.

To repeat the track currently playing, press the REPEAT button once.The REPEATLED will start to flash.
To repeat all tracks, pressthe REPEAT button twice. The REPEAT LED will light upand stay lit. Press the
PLAY/PAUSEbutton to begin.
To clear the REPEATfunction, press the REPEATbuttonagain. The REPEAT LED will turn off.

TURNING POWER ON/OFF

!

!

!

!

!

!

!

!

!

!

!

!

LOADINGA DISC

PLAY/PAUSE

STOP

MASTER VOLUME

SKIP (For both CD and CDG discs)

SEARCH (For audio CD disc only)

REPEAT

Note:

(Refer to the Trouble Shooting Guide if a disc is loaded but the total tracks do not appear.)

Note:

Note: The MIC Volumemust be adjusted simultaneously with the master volume level.

- Never place anything except a compact disc in the disc tray. Foreign objects can damage the unit.

- Only place one disc on the disc tray at a time.

- Pressing pause repeatedly when a CD+G is playing may cause distorted lyrics on your TV screen. Any distortion will
remain on the TV screen until it is refreshed either during an instrumental break or the song is stopped and/or the
song is started from the beginning.

(-- ).

E7

CD OR CD+G OPERATION

ENGLISH

CD OR CD+G OPERATION

PROGRAM

!

!

Use this button to program and play back songs in a preselected order.
Step 1: Programming should be done in the stop mode only. Press the PROGRAM button until the
PROGRAM LED flashes, the track will read [ ].
Step 2: Press the SKIP buttons ( - SKIP - ) to selecta desired track.
Step 3: Press PROGRAM button toconfirm entry. You can repeat the same steps up to a maximum of 24
tracks.
Step 4: Press PLAYbutton when you have completed programming and you are ready to start singing.
Press the STOPbutton to clear all the programmed entries.

RANDOM

DISCO LIGHT OPERATION

KARAOKE FUNCTIONS

!

!

!

During STOP mode, pressthe RANDOM button and PLAY button to start the random play function.
During playback, press the RANDOM button to activate the random play function and it will be started
after the current track.

Press the RANDOM button to clear the random function

To illuminate the Disco light and get your desired lighting effect, slide the Disco Light slidebutton from the
OFF position to your desired level.

Sing a long with the music by plugging in the provided microphone into either one of the microphone jacks
on the unit.

Adjust the MIC VOLUME control to a desired level and obtain the best performance.

.

D

DDWarning - Tapping or dropping the microphone while it is on can permanently damage your microphone. Resist

the urge to swing the microphone around by the cord!

Warning -

MIC VOLUME

ECHO

BALANCE

AUTO VOICE CONTROL

To avoid Microphone feedback please avoid being too close to the speaker.

Adjust the ECHO controltoenhance your voice foraconcert hall effect.

Adjust the BALANCE control between the prerecorded singer’s voice and the music when using a multiplex karaoke disc.
(Please see Glossary oftermto learn more aboutmultiplexon our website.)

AUTO VOICE CONTROLcan be activated by rotating the Auto Voice Control. The vocals on the multiplex recording will be
muted when the singer starts to sing through the microphone. When the singer stops to sing, the vocals will resume to
normal.

E8

ENGLISH