Onkyo TXNR-1000-2 Sevice Bulletin

CONFIDENTIAL

Service Bulletin

18 Park Way, Upper Saddle River, NJ 07458

No. 010

Date:

_____________________________________________________________ Model: TX-NR1000, DTR-10.5 Subject: Composite, S-Video picture is too bright.

Symptom: The customer complains: When viewing a video source through the set the

picture is too bright and washed out.

Solution:

with an 8.2K ohm resistor. version video board. The NCVD-8201(B) board already has the correct value resistor.

Replace resistor R2037, located on the NCVD-8201(C) plug in video board,

Note: the resistor change only applies to the NCVD-8201(C)

November 14, 2005

______________________________________________________________________________________

This document and the information it contains is intended for the exclusive use of Authorized ONKYO Service Centers and their employees. This document may contain information that is privileged, confidential and exempt from disclosure under applicable law and terms of the ONKYO Service Agreement. Any dissemination, distribution or copying of this document and the information it contains is strictly prohibited.

CONFIDENTIALITY NOTICE:

Parts:

Ref# Description Part Number

R2037 8.2K ohm resistor 435038224R1

Board Identification: This update only applies to units having the plug in Video

Board labeled NCVD-8201 (C). See photos to learn how to identify the video board type.

_____________________________________________________________________________________

CONFIDENTIALITY NOTICE: