Onkyo SEC4BT User Manual

User manual

STEREO HEADPHONES

SE-C4BT

Bluetooth solution: WT200
Bluetooth version: V4.2
Bluetooth profiles: A2DP,AVRCP,HFP,HSP
CODEC: SBC
Speaker : 8mm (same as C7BT)
Operation distance: 10 meter
Battery: 80mAh VDL41030(400929)
Charging time: about 1.5 hours
Music playing time: 6.5 hours
Phone call time: 6.5 hours
Temperature : 5~40 ºC

==================================================================

1.Indicator
2 Volume+ / next chart
3． Volume- /previous chart
4． ON/OFF /play/pause
5． Usb 5 V Output

Feature:

 Enjoy music through Bluetooth
 Phone call with BT function
 Remote control music
 High sensitivity,omni bearing microphone design
 Apply for devices:with all BT mobile phone,iphone,Laptop Etc.

Pairing:red&blue light blinking
Pairing successful:blue light slow blink
Charging: red light on, full charge LED light off .

一. BT earphone pairing

1.press and hold （ ）5s open Pioneer SE-C4BT,Lasting to red &blue light blinking,into paring mode
（noted :Paring need to finish in 5 minutes,after 5 minutes earphone will shut off automatic ）

2.Open the phone or Bluetooth device ,”Bluetooth search”or “add new equipment" search Bluetooth
headset Pioneer SE-C4BT “

3.Click on the device name connection, the connection has a successful connection tone and blue light
flashing. This means that the connection is successful.
二．Answer phone call

incoming call tone or ring tones, short press ( ), you can answer the call.Or use your phone to
answer a call.

三.Reject phone call

Short press ( ) or use the phone to stop the call .

四．.Last number redial

Double click ( ) to redial last number

五．Music playing

Short press “ ” paly /pause,long press +to next chart,short press + volume UP;long press -to

previous chart, short press - ,volume down .