Onkyo MHPAV1 Users Manual

Wireless Headphone

User’s Manual

MHP-AV1(WT-1+WR-1)

1

Acknowledgment & Trademark

Manufactured under license from Dolby Laboratories “Dolby”, “Dolby Digital”, “Dolby
Pro Logic”, and the Double – D symbol are trademarks of Dolby Laboratories.

FCC Compliance S t ate ment

The equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and on. The user is
encouraged to try to correct the interference by one or more of the following measure:

Reorient or relocates the receiving antenna.

‧

Increase the separation between the equipment at receiver.

‧

Connect the equipment into an outlet on a circuit different from that to which the

‧

receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

‧

Notice:

This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation. Shielded cables and I/O cords must be used for this equipment to
comply with the relevant FCC regulations. Changes or modifications that are not
expressly approved in writing by HC Technology Co., Ltd. May void the user’s quthorty
to operate this equipment. This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus set out in the radio interference regulation of
the Canadian Department of Communication.

IMPORTANT NOTE: FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

Table of Contents

Introduction 3
Specification 3
Package Includes 3
Safety Voltage Chart 4
Description of Parts 5
Connection Chart 6-7

2

In case of insurance claim, please make sure to record the Model Number and Serial
Number printed on the real panel of the cabinet. The space below is provided for you to
record the information.

Model Number : _______________________________
Serial Number :________________________________
Purchase Date : ________________________________
Dealer Name : _________________________________

Introduction

Using a sophisticated room modeling techniques, the Juster Wireless Dolby Headphone

combines the 5.1 surround signals to create an amazingly vivid surround sound
environment. It is a perfect solution for travelers and late-night movie viewers.

Specification

‧Audio Mode Support: Dolby Digital, Dolby Pro Logic II, DTS, MPEG2 AAC
‧Dolby Headphone Mode: Dolby Headphone and Stereo
‧Audio Input: Digital: Optical / coaxial and Analog: RCA /Stereo Line in
‧

Wireless: 2.4GHz RF Communication

‧Headphone driver: Φ40mm

‧ requency Response: 20Hz - 20kHz

F
Power: DC 2.4V (Rechargeable battery x 2)

‧

DC 3V (AA battery x 2)

Package Includes

Dolby headphone decoder with Wireless Transmitter (1pc)

‧

Short stereo cable: 0.5M (1pc

‧

Long stereo cable: 2.5M (1pc)

‧

Short optical cables: 0.5M (1pc)

‧

Long optical cables: 2.5M (1pc)

‧

Optical adapter (1pcs)

‧

AAA Rechargeable battery (2pcs)

‧

Battery-charge adapter (1pc)

‧

User manual (1pc)

‧

3