®
Bluetooth Wireless Keyboard
Instruction Manual
Keycode: 42912293
21/12/2018 11:19 AM
Safety Instructions:
Please read the instruction manual before using this device and follow
all the safety instructions to avoid damage caused by improper use.
Keep the instruction manual for future reference. Should this device
be given to a third party, then this instruction manual must also be
handed over.
This device is intended for household use only.
Only use this appliance indoors.
Always put the appliance on a level, stable, clean, dry surface. Pro-
tect the appliance from extreme heat and cold, dust, direct sunlight,
humidity and drops or jets of water.
Do not immerse the appliance in water or in other liquids.
Do not open the housing under any circumstances. Do not intro-
duce any objects into the interior of the housing.
Should the device malfunction due to electrostatic discharge or
a short power surge, disconnect it from your computer and then
reconnect it again.
2
21/12/2018 11:19 AM
System requirements:
Windows XP SP3 / VISTA / 7 / 8 / 10 and Mac OS X (10.4)
Please ensure that your computer supports Bluetooth
1.2.Unpack the device and check if all parts are there and undamaged.
Should this not be the case, return the product to Kmart for replacement.
Danger of suffocation! Keep all packaging materials away from
children.
3.
Dispose of the packaging materials properly. Inform yourself at the
local authorities regarding collection points or garbage separation.
Remove all protective foils and packaging material prior to use.
4.
®
3.0 technology.
Product overview:
LED
multi media keys
battery compartment
connect button
on/off switch
3
21/12/2018 11:19 AM
Inserting the Batteries
1.
Remove the battery compartment covers of keyboard
1.5 V AAA batt
inside the batt
the batteries are
eries . Please note the polarity
diagram printed inside
ery compartments. Caution! Danger of
incorrectly replaced.
2. Replace the battery compartment cover again.
Notes on batteries
It is recommended to only use Alkaline or Rechargeable batteries.
If the device is not to be used for an extended period of time, then
the batteries should be removed.
Batteries do not belong in household waste! Expired batteries must be
disposed of in an environmentally friendly way and according to the
applicable legal regulations.
Please keep the batteries and the device components away from
children at all times. If a battery is swallowed, seek medical attention
immediately.
Batteries must not be recharged or activated with other means,
Remove the batteries prior to disposing of the device.
and insert two
explosion if
4
21/12/2018 11:19 AM
Bluetooth connection
Connecting keyboard
1.
Insert two 1.5 V AAA batteries into the bottom of the keyboard
2.
Turn on the Bluetooth function on your computer
3.
Turn the ON/OFF switch on the bottom of the keyboard to “ON” (the LED
light on the top of the keyboard will light up).
4.
In the Bluetooth function on your computer select “Add Bluetooth or
Other Device”.
5.
Press the “Connect” button on the bottom of the keyboard, till the LED
starts blinking.
6.
Select ‘Bluetooth-Keyboard” from the list of discoverable devices (please
note this may take a minute for the device to pop up).
7.
A pin code will display on the screen. Type the code onto the Bluetooth
Keyboard and click enter.
8.
The keyboard will connect and the LED light will stop blinking.
9.
The keyboard is now ready to use.
If you don’t find the Bluetooth Keyboard, select “Add Bluetooth or Other
Device” again to find them.
Choosing your operating system
Windows:
Android: press FN and Q (Android) key at the same time
Mac: press FN and E (IOS) key at the same time
press FN and W (Windows) key at the same time
Power saving mode
If the device is not used for ten minutes, it switches to power saving
mode. Just move the mouse, or press any key to reactivate it.
Care and maintenance
Wipe all parts with a dry soft cloth.
5
21/12/2018 11:19 AM
Note for Windows 10 users:
Follow above step 1 to 3 of Bluetooth connection.
1.
Press the “Connect” button on the bottom of the keyboard, till the LED starts blinking.
2.
Select: Control Panel / Hardware and Sound / Devices and Printers
3.
Click on “add a device” and select the keyboard. If no keyboard is displayed,follow
4.
above of Bluetooth connection.
The system indicates you to enter the passcode, but ignore it and select “Or, try
5.
entering a passcode on it”.
A passcode is displayed, type the code into Bluetooth keyboard.
6.
The keyboard will connect and the LED stops blinking.
7.
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects
in materials and workmanship for the period stated above, from the
date of purchase, provided that the product is used in accordance with
accompanying recommendations or instructions where provided. This
warranty is in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange
(where possible) for this product if it becomes defective within the
warranty period. Kmart will bear the reasonable expense of claiming the
warranty. This warranty will no longer apply where the defect is a result
of alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand)
with your product. Warranty claims and claims for expense incurred in
returning this product can be addressed to our Customer Service Centre
at 690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory
rights observed under New Zealand legisla
tion.
6
21/12/2018 11:19 AM
Loading...