Radiant heater with fan
YS10-RF
Instruction Manual
Important Safety Instructions
Please keep this instruction manual in a safe place, along with the warranty
card, purchase receipt and carton for future reference. The safety precautions
enclosed herein reduce the risk of fire, electric shock and injury when correctly
adhered to.
- If the supply cord is damaged,
it must be replaced by the
manufacturer or its service agent
or a similarly qualified person in
order to avoid hazard.
- Before turning on, ensure the
electrical voltage and frequency
of the circuit correspond to those
indicated on the appliance.
- The appliance is not intended for
use by young children or infirm
persons without supervision.
- Young children should be
supervised to ensure that they do
not play with the appliance.
- Do not operate the appliance
outdoors
- Power plug must be removed
from power socket before
cleaning, servicing, maintenance
or moving the appliance.
- When the appliance is not in use,
switch it off and unplug it.
- The appliance should be placed on
a flat surface when operating to
avoid overturning.
- To reduce the risk of electrocution,
never operate this product with wet
hands, submerge in water or spill
liquids into the product.
- Do not insert any objects into the
appliance.
- Do not kink or damage the power
cord.
- Improper installation may result in
the risk of fire, electric shock and or
injury to persons.
- The manufacturer is not responsible
for any eventual damages caused
by improper or faulty use.
- The unit has no user-serviceable
parts contained within. Do not
attempt to repair, disassemble or
modify the appliance.
- This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge unless
they have been given supervision
or instructions concerning use
of the Appliance by a person
responsible for their safety.
Knowing your parts
Heating buttons
Using your Heater
Assembling the Heater
Take notice of the two power buttons located on the
side of the halogen heater. Press the top button to turn
on the fan and top heating element. The other button
turns on the lower heating element. Each button outputs
500W of power. For high heat (1000W) turn on both
buttons together.
The heater comes with a carry handle located at the back
for easy relocation. The handle is made from insulated
plastic, making it cool to the touch.
No assembly is required as the radiant heater comes pre-assembled and ready-touse straight from the package.
Using the Heater
1. Place the heater on a flat surface, away from flammable objects.
2. Plug in the power cord to the wall socket when ready for use.
3. Switch on either one of the switches to turn the heater on medium heat
(500W). For high heat (1000W), turn both the top and bottom heating
elements on.
Important Safety Instructions
- Use the appliance only for the
mentioned purpose, namely as a
radiator for domestic use. Do not use
it as any other application as it could
be dangerous.
- Do not operate the heater near
flammable objects (furniture, curtains,
shelves etc).
- Do not operate the heater near
liquids (bath-tubs, showers, basins,
swimming pools etc).
- Do not cover the appliance when it is
operating to avoid overheating.
WARNING: This appliance gets extremely hot during operation and should be
handled with care. Be careful of getting burnt. Never put flammable objects on
or near the appliance as they could set alight.
- Never attempt to remove the front grille
of the heater.
- Do not put the cable on the
appliance when it is still warm.
- Do not connect the appliance to
extension cords or multiple outlets.
- Never operate the appliance immediately
below an outlet.
- Never connect the appliance to a
thermal control device or a time switch
to avoid overheating when the heater
is moved or covered.
Important features of your Heater
Carry handle
The heater has a convenient carry
handle located at the back of the
unit, for easy relocation.
Instant heating
The use of efficient quartz heating
elements ensures heat is produced
instantaneously.
Whisper-quiet operation
The heater operates in near silence.
Portability
The heater is small in size and
lightweight making it very portable.
Built-in overheat protection
The heater has a built-in sensor
which will turn the heater off if it is
overheating.
Two heating switches
Each switch outputs 500W of
heating power. For high heat,
turn on both heating elements
to get 1000W of heating
power.
Safety grille
The safety grille provides
protection against stray objects
from touching the heating
elements.
Stable base with safety tilt
switch
The flat sturdy base ensures
stability on the ground during
use. There is a safety tilt switch
on the bottom of the base which
turns off the heater if the base is
no longer flat on the ground (i.e.
fallen over).
Care and Cleaning Instructions
The appliance is not designed to be dismantled without special tools. Please do
not attempt to separate the unit.
1. Ensure appliance is disconnected from the power supply and switched off
before attempting to clean.
2. Cleaning the exterior of the unit should only be attempted with a slightly
damp, soapy cloth. After wiping down the unit with the soapy cloth, dry any
wet spots with a dry cloth.
3. Use a vacuum cleaner regularly to remove dust and fluff from the element and
grill.
4. When not in use, pack the heater into its original box for best protection and
store in a cool, clean and dry location.
Caution: Never immerse the heater in water for cleaning.
Distributed by Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest DC 2086, NSW
Fax: (02) 9975 2688
Email: info@tempoaustralia.com.au
Customer Helpline AU: 1300 886 649
NZ: 0800 836 761
This product is covered by a 12 month replacement warranty along
with the proof of purchase.
Loading...