Onix NSB-200J-08 Instruction Manual

Low Profi le Fan Heater
Model: NSB-200J-08

INSTRUCTION MANUAL

Care and Cleaning Instructions

The appliance is not designed to be dismantled without special tools. Please
do not attempt to separate the unit.

1. Ensure appliance is disconnected from the power supply and
switched off before attempting to clean.

2. Cleaning the exterior of the unit should only be attempted with a
slightly damp, soapy cloth. After wiping down the unit with the cloth,
dry any wet spots with a dry cloth.

3. Use a vacuum cleaner regularly to remove dust and fl uff from the
element and grill.

4. When not in use, pack the heater into its original box for best
protection and store in a cool, clean and dry location.

Caution: Never immerse the heater in water for cleaning.

This product is covered by a 12 month replacement warranty along

with the proof of purchase.

Important Safety Instructions

Please keep this instruction manual in a safe place, along with the warranty
card, purchase receipt and carton for future reference.
The safety precautions enclosed herein reduce the risk of fi re,
electric shock and injury when correctly adhered to.

Using your Heater

Assembling the Heater

No assembly is required as the fan heater comes pre-assembled and
ready-to-use straight from the package.

Using the Heater

1. Place the heater on a fl at surface, away from fl ammable objects.

2. Select the desired operating position. The horizontal position will
spread the heat to a wider area while the vertical position will emit a
more direct heat.

3. Plug in the power cord to the wall socket when ready for use.

4. Turn the ‘heat setting’ dial clockwise to select the desired power
output. The fi rst mode simply turns the fan on with no heat being
produced. The next mode turns on the low level heat (1000W). For
maximum heat output select high heat (2000W).

5. The ‘thermostat control’ controls the level of heat being emitted but
is dependant on the ‘heat setting’. Turn clockwise to increase the level
of heat being emitted. This function gives you the fl exibility of selecting
from a wider range of heat levels.

- If the supply cord is damaged,
it must be replaced by the
manufacturer or its service agent
or a similarly qualifi ed person in
order to avoid hazard.

- Before turning on, ensure the
electrical voltage and frequency of
the circuit correspond to those
indicated on the appliance.

- The appliance is not intended for
use by young children or infi rm
persons without supervision.

- Young children should be
supervised to ensure that they do
not play with the appliance.

- Do not operate the appliance
outdoors

- Power plug must be removed
from power socket before
cleaning, servicing, maintenance or
moving the appliance.

- When the appliance is not in use,
switch it off and unplug it.

- The appliance should be placed
on a fl at surface when operating
to avoid overturning.

- To reduce the risk of
electrocution, never operate this
product with wet hands, submerge
in water or spill liquids into the
product.

- Do not insert any objects into
the appliance.

- Do not kink or damage the
power cord.

- Improper installation may result
in the risk of fi re, electric shock
and or injury to persons.

- The manufacturer is not
responsible for any eventual
damages caused by improper or
faulty use.

- The unit has no user-serviceable
parts contained within. Do not
attempt to repair, disassemble or
modify the appliance.