instruction manual
INSTRUCTION MANUAL
AFTER SALES SUPPORT:
AUS 1300 886 649 | NZ 0800 836 761
N13275
Carbon Fibre Heater
Model No: NS-900C
T
W
E
L
V
E
M
O
N
T
H
W
A
R
R
A
N
T
Y
12
Months
1
Important Safety Instructions
Read all of these instructions carefully before operating the unit.
1. The heater is hot when in use, do not touch the hot surface of the heater and
keep all combustible materials at least 3 feet from the heater.
2. Extreme caution is necessary when any heater is being used near children.
3. Do not leave the heater unattended when in operation.
4. Always unplug the heater when it is not in use.
5. Do not operate the heater if the plug or the power cord is damaged in any way
or the unit has malfunctioned.
6. Do not use this heater outdoors.
7. Do not use this heater in the immediate surroundings of a bath, shower
or swimming pool.
8. When disconnecting the heater, always make sure that the controls are in the
OFF position and never pull the plug by the cord.
9. Do not allow foreign objects to enter the heater as this may cause an electric
shock or a re hazard.
10. To prevent the possible risk of re please ensure that the heater is not covered
by any objects.
11. Do not use in areas where there is petrol, paint or any other ammable liquids stored.
12. Never use the heater for anything other than its intended purpose.
13. The heater must not be directly located below a socket outlet.
14. Always ensure that the heater has cooled fully before storing.
15. This appliance is not intended for use by young children or inrm persons unless
they have been adequately supervised by a responsible person to ensure that they
can use the appliance safely.
16. Young children should be supervised to ensure that they do not play
with the appliance.
17. WARNING: In order to avoid overheating, do not cover the heater.
18. WARNING: Do not attempt to open the heater. No user accessible parts inside.
Please call our customer service number for any service issues.
19. Warning: The heater must not be used if the glass panels are damaged.
20. Do not use this heater with a programmer, timer, separate remote-control system or
any other device that switches the heater on automatically, since a re risk exists if
the heater is covered or positioned incorrectly.
21. The reguard of this heater is intended to prevent direct access to heating elements
and must be in place when the heater is in use;
22. The reguard does not give full protection for young children and inrm persons.
23. Instructions shall be provided for cleaning the reector of this visibly glowing heater.
2
Features of your heater
Energy Efcient
Cheaper to run then some
other heaters
Stable base
with safety tilt switch
The at sturdy base ensures
stability on the ground during
use. There is a safety tilt switch
on the bottom of the base
which turns off the heater if
the base is no longer at on
the ground (i.e. fallen over)
Carry Handle
For convience and portability
Rotating heater head
Bends at a 90° angle
Even heat distribution
Thin carbon plates
2 Heat settings
400W/900W
Infrared Rays
Emits rays that are benecial
for health and healing
Lower surface temperature
Making it safe and free from
over heating
3
Operation:
1. Place the heater on a rm level surface free from obstructions and at least 3 feet
away from any wall or combustible materials.
2. With the selector knob in the OFF position , plug the heater into the mains supply.
3. Turn the control knob to either (1) for 450 Watt or (2) for 900 Watt.
4. Turn the control knob fully to the position to activate the oscillation feature.
5. Turn the selector knob to the OFF position and unplug the unit when you have
nished using it.
Other Features:
This heater is equipped with a safety tilt switch which automatically shuts off the heater
element if the heater is not in the upright position, the heater will resume back to normal
when the heater is returned to the upright position.
If your heater fails to operate:
1. Be sure that the unit is plugged into the power supply and that the electrical outlet is
in working order.
2. Check for obstructions.
3. If you nd any obstruction, turn the heater OFF, unplug the unit from the power
supply and wait for it to cool down, carefully remove the obstruction, plug the
heater back into the power supply and restart the unit as described in
the OPERATIONS guide.
4. If the defect persists, remove the plug from the power point and consult an
authorized electrical company.
4
Heater Benets
• Even Heat Distribution: Carbon Fibre heaters are composed of thin carbon
plates and have an even heat distribution area.
• Lower Surface Temperature: The surface temperature is much lower making
them safer and won’t overheat.
• More Heat Coverage: Carbon Fibre heaters provide more heat coverage than
ceramic heater saunas.
• Infrared Rays: Carbon Fibre heaters emit rays that are closer to far infrared which
is most benecial for health and healing.
• Durable and long lasting: Carbon bre heaters last for a long time if used and
cared for correctly.
• Lower Energy Cost: Carbon heaters are energy-efcient
5
Cleaning & Storage
We recommend that the heater is cleaned at least once a month and before storage.
Turn the heater OFF, unplug the unit and allow it to cool down. Use a dry cloth to clean
the external surface of the heater. DO NOT USE WATER, WAX, POLISH OR ANY
CHEMICAL SOLUTION.
6
Notes:
7
Distributed by Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056 Frenchs Forest LC
Sydney, Australia NSW 2086
Telephone: (02) 9975 2199 Fax: (02) 9975 2688
Email: info@tempoaustralia.com.au
Customer Helpline: 1300 88 66 49 (Aust) 0 800 836 761 (NZ)
Loading...