![](/html/11/1145/114562377e0271293e51b51c4ae9ac84e842b4ee91e4099ac9f9504936a9e566/bg1.png)
SAFETY
, OPERATION & MAINTENANCE MANUAL
®
DYN-812D & DYN-1012D
DYNAVAC CONCRETE VACUUMS
This unit is intended for commercial use.
READ & FOLLOW ALL
INSTRUCTIONS, WARNINGS &
CAUTIONS
PLEASE READ CAREFULLY BEFORE OPERATING
This vacuum will afford you many years of troublefree operating satisfaction, provided it is given
proper care. All parts have passed rigid quality control standards prior to their being assembled to
produce the finished product. Prior to packaging,
your vacuum was again inspected for assurance of
flawless assembly.
This vacuum is protectively packed to prevent damage in shipment. We recommend that upon delivery, unpack the vacuum and inspect it for any possible damage. Only a visual examination will reveal
damage that may have occurred.
If damage is discovered, immediately notify the
transportation company that delivered your vacuum. As a shipper, we are unable to report any claim
for damage. You must originate any claim within 5
days.
This manual is for your protection and information.
PLEASE READ CAREFULLY since failure to follow
precautions could result in discomfort or injury.
Read this manual completely before operating this
vacuum. It is important to follow the instructions in
the manual to prevent the possibility of injury or
damage to the user and/or vacuum.
Treat your vacuum cleaner as you would any other
high grade precision made product. Dropping,
unreasonable bumping across thresholds and other
misuses may result in a damaged unit that will not
be covered by warranty.
SAVE THESE INSTRUCTIONS
Address: 777 South Street,P.O. Box 2310, Newburgh, New York 12550-0606
TEL: 877.356.6703 / 845.565.6623 / FAX: 845.565.8894
Internet Address: www.onfloor.com / info@onfloor.com
PP
11
AAGGEE
PN 225878 - DYN812D & DYN1012D Vacuum Manual - Printed in USA 05/01/07
![](/html/11/1145/114562377e0271293e51b51c4ae9ac84e842b4ee91e4099ac9f9504936a9e566/bg2.png)
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To Reduce the Risk of Fire, Electric Shock or Injury:
Electric shock could occur if used on wet surfaces.
DO NOT expose to rain. Store indoors.
When using this vacuum basic precautions should always
be followed, including the following:
1) DO NOT leave the vacuum when plugged in.
Unplug from the outlet when not in use and before
servicing.
2) To avoid electric shock, DO NOT expose to rain.
Store indoors. DO NOT use on wet surfaces.
3) This is NOT a toy. Close attention is necessary
when used around or near children.
4) Use only as described in this safety manual. Use
only manufacturer's recommended attachments
and accessories.
5) DO NOT use this vacuum with a damaged cord
or plug. If the vacuum is not working as it should,
because it has been dropped, damaged, left outdoors or dropped into water, contact an authorized
service center or factory.
6) DO NOT unplug the vacuum by pulling on the
cord. To unplug, grasp the plug, not the cord.
7) DO NOT pull or carry by the cord, use cord as a
handle, close a door on cord, or pull cord around
sharp edges and corners. DO NOT run vacuum over
cord. Keep cord away from heated surfaces.
8) DO NOT handle the vacuum’s plug with wet
hands.
9) Keep hair, loose clothing, fingers, and all parts
of the body away from openings and moving parts.
11) DO NOT put any objects into the openings. DO
NOT use with any opening blocked; keep free of
dust, lint, hair and anything that may reduce air
flow.
12) DO NOT pick up anything that is burning or
smoking, such as cigarettes, matches, or hot ashes.
13) DO NOT use without the cloth filter assembly
in place.
14) DO NOT use the vacuum to pick up flammable
or combustible liquids such as gasoline or use in
areas where they may be present.
15) DO NOT use where anesthetics and oxygen are
used.
16) Turn OFF all the controls before unplugging
17) DO NOT use an extension cord unless absolute-
ly necessary. If an extension cord is used, then wire
size must be #14 or larger and should not exceed
50 feet in length. The extension cord must be a
three-wire type to insure grounding protection.
18) Replace damaged or worn parts immediately
with genuine original equipment parts to maintain
safety and to protect your limited warranty.
This vacuum must be connected to a properly
grounded outlet only. (See grounded instructions)
When not in use the power cord should be wrapped
around the motor head for storage.
10) Use extra care when cleaning on stairs.
AVE THESE INSTRUCTIONS
S
PP
22
AAGGEE
![](/html/11/1145/114562377e0271293e51b51c4ae9ac84e842b4ee91e4099ac9f9504936a9e566/bg3.png)
GROUNDING INSTRUCTIONS
Improper use of the grounding plug can result in a risk of electric shock.
DANGER:
Electrical equipment must be grounded. If it
should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. This vacuum is equipped with a cord having an equipmentgrounding conductor and grounding plug. The plug
must be inserted into an appropriate outlet that is
properly installed and grounded in accordance with
all local codes and ordinances.
GROUNDING METHOD
This electric equipment is for use on a nominal 120
volt circuit, and has a grounded plug that looks like
the plug illustrated in (Fig A). A temporary adaptor
that looks like the adaptor illustrated in (Fig B & C)
may be used to connect this plug to a 2-pole receptacle as shown in (Fig B) if a properly grounded outlet is not available.
If repair or replacement of the cord or plug is necessary, DO NOT connect the grounded wire to
either flat blade terminal. The wire with insulation having an outer surface that is green with or
without yellow stripes is the grounding wire.
The temporary adaptor should be used only until a
properly grounded outlet (Fig A) can be installed by
a qualified electrician. The green color rigid ear,
lug or the like extending from the adaptor must be
connected to a permanent ground such as a properly grounded outlet box cover. Whenever the
adaptor is used, it must be held in place by a metal
screw. (Fig C)
Improper connection of the equipment-grounding conductor can result in a risk of
person if you are in doubt as to whether the outlet is properly grounded.
DO NOT modify the plug provided with the equipment. If it will not fit the outlet,
WARNING:
electric shock. Check with a qualified electrician or service
have a proper outlet installed by a qualified electrician.
Note: In Canada, the use of a temporary adaptor is not permitted
by the Canadian Electrical Code.
PP
33
AAGGEE