Page 1
1
onetouch PB60
Portable Power Bank
User Guide
CJB1890ALAAA
Page 2
2
Catalog
.......................................................................................
Overview ..................................................................... 3
Specifications ............................................................. 4
Quick Start .................................................................. 5
Care and Maintenance ............................................. 8
Declaration of Conformity ......................................... 8
Guarantee ................................................................. 10
Page 3
Page 4
4
Specifications
Dimension 89x49x 27.7mm
Weight About132g
Capacity 5200mAh
Input voltage 5V
Input current 1000mA
Input port Micro USB
Charge time About 7hours
Output voltage 5V
Output current 1000mA
Output port A type USB
Discharge Temperature -10°C ~55°C
Charge Temperature 0°C ~45°C
Storage Temperature -15°C ~55°C
Page 5
5
Quick Start
Application :
Power Status Checking
Before use the power bank, one has to understand
the level of power stored in its battery. Simply
press the button 1.5s open the power bank to see
how the LED light indicates. Refer to the table
below, you will know the status.
Page 6
6
Charging status
Capacity LED1 LED2 LED3 LED4
0-25% Flash -- -- --
25%-50% Light Flash -- --
50%-75% Light Light Flash --
75%-100% Light Light Light Flash
Discharging status
Capacity LED1 LED2 LED3 LED4
0-25% Light -- -- --
25%-50% Light Light -- --
50%-75% Light Light Light --
75%-100% Light Light Light Light
Power on/off: press button 1.5s
Charge the Power Bank
Page 7
7
1， Power on first（press button 1.5s）。
2， insert the USB Micro-B plug from the power
source into the charge-in port
Prior to using the power bank for the first time, you
are recommended to fully charge the battery.
When the Power Bank is fully charged, Please
disconnect the Micro USB cable with the Power
Bank.
Charge mobile devices
1， Power on first（press button 1.5s）
2， To charge a mobile device simply uses a USB
charging cable to connect the Power Bank with
the mobile device.
After the mobile device is fully charged please
disconnect the Power Bank with the mobile
device.
Page 8
8
Suggestion charger standard: output current
over 1A
It will save your time to full charge power bank.
Care and Maintenance
Keep the product in dry condition. Rain, vapor
and various liquids might corrode the circuit.
Don’t use or store the product in any dusty or
dirty spaces to avoid damage to the
components.
Don’t store or use the product in beyond the
temperature range of “-15°C ~55°C”
Don’t put the product into fire.
Don’t attempt to open or dismantle the product,
don’t drop, or impact it.
If the product has not been use for long time,
please fully charge it before resuming using it.
Declaration of Conformity
Hereby, TCT Mobile Limited declares that this
product is in conformity with the following essential
requirements.
WEEE Approval
This device PB60 is in compliance
with the essential requirements and other relevant
provisions of the Waste Electrical and Electronic
Equipment Directive 2002/96/EC (WEEE
Directive).
Page 9
9
RoHs Approval
This device PB60 is in compliance
with the restriction of the use of certain hazardous
substances in electrical and electronic equipment
Directive 2002/95/EC (RoHs Directive).
EC DECLARATION OF CONFORMITY
Manufacturer / Importer certifies that the following
designated product
Product Name: Power Bank
Item No.: onetouch PB60
Is in fully conformity with the harmonized
standard(s)
EN 55022:2010
EN 61000-3-2:2006+A1:2009+A2:2009
EN 61000-3-3:2008
EN 55024:2010
Under the Council Directive
2004/108/EC on Electromagnetic Compatibility
The designated product was subject to sample
testing for which
Most issued test report number:
MTE/CLY/T13020189
The declaration is the sole responsibility of the
manufacturer / importer
TCT Mobile Limited
5F, E building, No. 232, Liang Jing Road Zhang
Jiang
High-Tech Park, Pudong Area Shanghai, P.R.
China. 201203
Page 10
10
Federal Communications Commission (FCC)
Statement
PB60 complies with Part 15 of the
FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
PB60 battery cell is UL1642 /
IEC62133 certified.
Guarantee
Your accessory is guaranteed against all
manufacturing defects for six (6) months from the
date of purchase indicated in your invoice.
Nevertheless, while the legal warranty period in
force in your country exceeded six (6) months, the
local legal warranty alone shall be applicable.
Loading...