One Tech 2B-ATT203, 2B-ATT301 User Manual
TRIPOD
2B-ATT203
2B-ATT301
TRIPOD
TRIPOD
TRIPOD TURNSTILE
TURNSTILE
TURNSTILE
TURNSTILE
User
User
User
User Manual
Manual
Manual
Manual
V2.4
V2.4
（
V2.4
V2.4
）
Page1Total
16
Introduction
Introduction
Introduction
Introduction
Respected Users:
Thank you for using the tripod turnstile that developed and produced by
Guangzhou Tianyi Electronics! The Tripod turnstile adopts a unique
technique of Tianyi Company, using standard wiring connection that makes it
conveniently achieve system integration with QR-Code of cell phone,
magnetic card, barcode card, ID card, IC card and other read/write device.
The product can be widely used in places that require intelligentized access
control, such as airports, metro stations, libraries, office buildings, clubs,
theaters, factories, bus terminals, scenic spots, places of entertainment,
hotels, and companies, etc.
This Tripod turnstile you bought from us is strictly and thoroughly checked,
and it is proved to be qualified. The turnstile is a high-tech product, in order
to make sure of its safety and reliable operation, and to avoid the
consequences brought by mishandling, please read carefully over these
instructions before using the product.
Page2Total
16
Content
Content
Content
Content
Introduction ………… . … . …………… .. ………… .. .. . 2
Content ……………… ..... …………… . ……… . … . … 3
I Brief I ntroduction of the Pro duct.... ......... ............ .4
II Operating Principle..............................................7
III Preparing & Installation......................................9
IV Handling Instruction..........................................
V Wiring Diagram..................................................12
VI Important Notice & Maintenance.......................1 3
VII Contact Information ..........................................13
Attachment 1 Communication Protocol ………… ....13
Attachment 2 DIP Mode Description ………… .. …… 14
11
Page3Total
16
Brief
Brief
Brief
Brief Introduction
I
Introduction
Introduction
Introduction of
of
the
of
of the
Product
the
Product
the Product
Product
2B-ATT203
1.1
Overview
1.1
Overview
1.1
1.1 Overview
Overview
The Tripod turnstile is one of the product series that self-designed, self-developed and
self-produced by Guangzhou Autob Intelligent Device Co., Ltd and Guangzhou Tianyi
Electronics Co., Ltd. This turnstile integrates mechanic design with microprocessor control
and different read-write functions; it achieves access control, attendance recording, tolling,
and counting function through read-write operations, and storing the information being read
in the microprocessor control system or the computer management system.
The h o u sing of this equipment is made of Stainless steel,inner material is Cold-rolled
stee l plate,With artistic design,more durable.The cabinet with arms can offer a orderly and
civilized access mode.
The mechanical structure of this product integrates with the electrical control structure,
which makes the configuration, assembling, disassembling, and maintenance of different
parts easy to handle. The operation is simple, reliable and convenient, because the barrier
Page4Total
16
controls the turning of the full height rotation through non-touch information exchange
between the IC card (or other sensor cards) and the card reader. The barrier can adopt
barcode card control, magnetic card control, ID card control, or contact IC card long-range
control, according to different requirements of customers. The high performance
microprocessor control makes the barrier dependable. It allows both one-way access and
two-way access.
Six working modes are optional for this turnstile, and three for the arms. Normally 20
people can pass in every minute, while 35 can pass in the fast mode. The turnstile equips
with self-checking function, and it adopts power-on self-test. The turnstile can lockup the
arms automatically. The auto reset function of the turnstile makes sure that the board would
automatically reset when someone pushing it by force.
Preventing pull the arms in the opposite direction. Arms will lock when pulling arms in
the opposite direction,and arms will reset automatically.
The turnstile can integrate with the computer. It can achieve management functions like
tolling, counting, attendance recording, and identification, while adopting the management
software developed by our company to process the information record being read. And it is
one of the most special features of this product.
1.2
1.2
1.2
1.2 The
The
constitution
The
constitution
The constitution
constitution and
1
This barrier is constituted by five parts:
）
A ） Cassette mechanism; B ） Microprocessor control systems; C ） Stainless steel or
cold-plate spraying plastics cabinet; D ） Read-write device; E ） Display units.
The rotating device of the cassette mechanism and the microprocessor control
systems are inside the cabinet, and they constitute the main body of this product.
The turnstile adopts inducting IC card, ID card, or barcode reading head, and it has
the functions of two-way identifying, verifying and anti-counterfeiting.
2 ） Functions/Features
and
functions/features
and
functions/features
and functions/features
functions/features of
of
this
of
of this
product
this
product
this product
product
● The application of unique reducing motor, poly V-belt variable transmission, and the
coding-electronic-controlled reset device, achieving the precise positioning and
locking of the arms.
● The photoelectric detection and microprocessor digital signal processing of the
electronic rotation and arms reset makes the motion steady and reliable.
Page5Total
16
Loading...