Page 1
LAWN & GARDEN MOTORIZED
Model
96622
CADDY SPRAYER - 2 GALLON
CLEANING, ASSEMBLY, AND OPERATION
INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Page 2
CONTENTS
IMPORTANT SAFEGUARDS ...........................................3
Work Area Safety .......................................................................3
General and Specic Safety......................................................4
SPECIFICATIONS .............................................................5
UNPACKING ..................................................................... 5
CLEANING ........................................................................ 5
ASSEMBLY ....................................................................... 5
OPERATION...................................................................... 7
INSPECTION AND MAINTENANCE ................................ 9
Troubleshooting .........................................................................9
PARTS LIST ..................................................................... 10
PARTS DIAGRAM............................................................ 10
Page 2SKU 96622 For technical questions, please call 1-800-444-3353.
Page 3
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in
the back of the manual near the assembly diagram (or month and year of purchase if
product has no number). Keep this manual and the receipt in a safe and dry place for
future reference.
IMPORTANT SAFEGUARDS
In this manual, on the labeling, and all other information
provided with this product:
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGERDANGER
WARNINGWARNING
CAUTIONCAUTION
NoticeNotice
CAUTIONCAUTION
READ AND UNDERSTAND ALL INSTRUCTIONS
DANGER indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
CAUTION, used with the safety alert
symbol, indicates a hazardous situation
which, if not avoided, could result in minor
or moderate injury.
NOTICE is used to address practices not
related to personal injury.
CAUTION, without the safety alert symbol,
is used to address practices not related to
personal injury.
When using, safety precautions should always be followed including
the following:
Work Area Safety
Close supervision is necessary when used near children.1.
Page 3SKU 96622 For technical questions, please call 1-800-444-3353.
Page 4
2.
Keep the work area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions and other debris.
General and Specic Safety
1.
2.
3.
4.
5.
6.
7.
8.
Always wear ANSI-approved safety eye goggles and work
CAUTION
Never spray or point the Power Spray Gun, or Misting Nozzle in the direction of
any human or animal.
Keep the Safety Lock (located just below the Power Sprayer Gun Trigger) in the
locked position when the Motorized Power Sprayer is not in use.
Follow all manufacturers instructions for use, cleaning and disposal of all
chemicals used with this tool.
Use this Motorized Caddy Sprayer only with non-thickening and nonammable
liquids.
Do not switch between different types of chemicals without proper cleaning as
explained in the “Cleaning” section of this manual on page 5.
CAUTION
CAUTION
of old, used batteries.
gloves when inspecting, using, cleaning and/or working on
this product.
Do not store chemicals in the Tank. Dispose of any
remaining chemicals according to manufacturers’ directions.
Do not mix old and new batteries. Do not mix alkaline with
standard (carbon-zinc) or rechargeable batteries. Always
check with local refuse disposal for correct way to dispose
9.
10.
11.
12.
13.
Make sure the Fill Cap (14), Drain Plug (15) and Universal Cap (10) are secured
snuggly at all times.
Do not use this Sprayer for other than intended use.
Maintain labels and nameplates. These carry important safety information. If
unreadable or missing, contact Harbor Freight Tools for a replacement.
This product is not a toy. Keep it out of reach of children when children are not
being closely supervised.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
Page 4SKU 96622 For technical questions, please call 1-800-444-3353.
Page 5
SPECIFICATIONS
Tank, Sprayer Nozzle, Handle and Tires:
Construction Materials
Battery Type AA 1.5 VOLT (QTY - 4 included)
Tank Capacity 2 - Gallons
Adjustable Nozzle Straight and Mist
Switch Switch includes Safety Lock
Polyethylene.
Extension Handle: ABS
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
CLEANING
Read the ENTIRE IMPORTANT SAFEGUARDS section at the beginning of
this manual including all text under subheadings therein before set up or
use of this product.
1.
2.
Always rinse the Tank (3), Fluid Pickup (11), Misting Nozzle (13) and Power
Sprayer Gun (12) completely with cold clean water at least twice before initial
use, between different chemicals when nished.
Dry with a soft cloth. Wipe with a soft clean cloth or sponge.
ASSEMBLY
Read the ENTIRE IMPORTANT SAFEGUARDS section at the beginning of
this manual including all text under subheadings therein before set up or
use of this product..
Note: Layout all parts making and inventory according to Parts List and Parts Diagram
on page 10 of this manual.
Page 5SKU 96622 For technical questions, please call 1-800-444-3353.
Page 6
4 1 2
3
4
Figure 1
1.
2.
Turn Collar (2) counterclockwise to loosen.
the Collar (2). Tighten the Collar (2) with clockwise motion until it is snug and the
Stop-Ring (4) is located just above it. See Figure 1.
Figure 2
5
8
1
Slide Holster (5) onto Extension Handle (1). The Holster (5) must face the
front and be on the right side of the Extension Handle (1) viewed from behind
the sprayer. Fasten Screw (7) and Hex-Nuts (8) securely with screwdriver (not
included). See Figure 2.
Insert the Extension Handle (1) into
7
5
Page 6SKU 96622 For technical questions, please call 1-800-444-3353.
Page 7
6
6
7
8
Figure 3
3.
4.
5.
6.
1.
Slide the Black Handle (6) onto the Extension Handle (1) until the holes in the
Black Handle (6) align with the holes in Extension Handle (1). Insert two Screws
(7) in front holes and use the remaining two Hex-Nuts (8) to secure the Black
Handle (6) to the Extension Handle (1). See Figure 3.
Insert four AA Batteries (included) into the Battery Compartment located in the
base of the Power Sprayer Gun (12).
Snap the Wand Clip (9) onto the Extension Pole (1) above the Holster (5). Screw
the Universal Cap (10) holding the Pickup Tube (11) onto the Tank (3).
The Motorized Power Sprayer may be used with either the Power Sprayer Gun
by itself (12), or by attaching the Misting Tube (13) to the end of the Power
Sprayer Gun (12) when only a light mist is needed.
OPERATION
Read the ENTIRE IMPORTANT SAFEGUARDS section at the beginning of
this manual including all text under subheadings therein before set up or
use of this product.
Clean the Motorized Power Sprayer before each use as explained in the
“Cleaning” section on page 5 of this manual.
2.
Fill the Tank (3) to full capacity by removing the Fill Cap (14) and carefully
pouring the liquid you will be using into the opening. Be sure to wipe off any
spilled liquid from the exterior of the Tank (3).
Page 7SKU 96622 For technical questions, please call 1-800-444-3353.
Page 8
Note: The Fill Cap (14) may be used as a measuring cup. Calibrations are embossed
into the side. Use chemicals only at strengths recommended by manufacturers’
label directions.
3.
4.
5.
6.
Replace the Fill Cap (14).
Point the Power Spray Gun (12) toward the ground and squeeze the trigger a few
times to prime.
Your Motorized Caddy Sprayer is now ready to use. Grab the handle and
move the Caddy Sprayer into position. Squeeze the Trigger on the Power
Spray Gun (12) and Spray with back and forth, or up and down motion keeping
the Power Sprayer Gun (12), and/or the Misting Nozzle (13) approximately
12 inches from what you intend to cover with the product you are using.
CAUTION: Do not spray against the wind.
When you are nished, or if you intend to switch chemicals, always clean
according to directions in “Cleaning” section on page 5 of this manual, and
following directions recommended by the manufacturer of the chemical you are
using for your project.
Page 8SKU 96622 For technical questions, please call 1-800-444-3353.
Page 9
INSPECTION AND MAINTENANCE
BEFORE EACH USE, inspect the general condition of this Motorized Caddy Sprayer.
Check for loose screws, misalignment or binding of moving parts (including wheels), cracked
or broken parts, and any other condition that may affect its safe operation.
Troubleshooting
Problem Possible Causes Probable Solutions
Product will not spray
from either Power
Spray Gun or Misting
Nozzle.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
Weak or dead Batteries.
1.
Fluid Tube or Nozzle(s) clogged.
2.
Fluid level in Tank too low.
3.
Check Batteries, replace if
1.
necessary with new.
Check Fluid Tube and Nozzle(s) for
2.
blockage and ush with cold, clean
water if needed.
Check uid level in Tank and ll to
3.
proper capacity.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not
available individually as replacement parts.
Page 9SKU 96622 For technical questions, please call 1-800-444-3353.
Page 10
PARTS LIST
Part Description Q’ty
1 Extension Handle 1
2 Collar 1
3 Tank 1
4 Stop-Ring 1
5 Holster 1
6 Black Handle 1
7 Screws 3
8 Hex-Nuts 3
Part Description Q’ty
9 Wand Clip 1
10 Universal Cap 1
11 Pickup Tube 1
12 Power Sprayer Gun 1
13 Misting Nozzle 1
14 Filler Cap/Measuring Cup 1
15 Drain Plug
PARTS DIAGRAM
9 5 12 7 14 2
6
10
8
1
13
11
4 3 15
Note: Four AA Batteries are included but not shown in Parts Diagram or listed on Parts
List.
Page 10SKU 96622 For technical questions, please call 1-800-444-3353.
Loading...