One Stop Gardens 95996 User Manual

CAR WASH NOZZLE

Model

95996

ASSEMBLY AND OPERATION INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

ALL WARNINGS AND INSTRUCTIONS BEFORE USE.

Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

SPECIFICATIONS

Construction

9 Spray Patterns Jet, Mist, Flood, Flat, Angle, Shower, Fan, Cone, Center.

Overall Dimensions 10” L X 7-1/8” H X 2.69” W

Inlet Fitting 5/16” ID (0.322”) Plastic Barb Fitting

Aluminum Nozzle Head 2-1/4” L X 2.41” Diameter

Pattern Adjustment Ring 2.68” Diameter X 1/2” W (Black Rubber)

Detergent Tube 3.47” L X 1.93” Diameter

Mix-Water Dial

Trigger Lock Folding Steel Wire

Squeeze Trigger 4.31” L X 7/8” W (Black Plastic)

Aluminum Head with Rubber Nozzle Head Ring. Hard Rubber Handle.

1.52” Diameter X 3/4” H (Gray Plastic) Markings: Mix & Water

Save This Manual

You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no serial number. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES AND WARNINGS

Check for misalignment or binding of moving parts and any other condition

that may affect the Nozzle’s operation. If damaged do not use.

Maintain labels and nameplates on the tool. These carry important information.

If unreadable or missing, contact Harbor Freight Tools for a replacement.

Use only cold, clean water and soaps that are intended for use with this kind

of Car Wash Nozzle.

Always release the Handle before changing the spray pattern.

NEVER use water from pressure washers or other water pressure systems.

Do not direct hose spray at people or animals.

WARNING: The brass components of this product contain lead, a chemical

known to the State of California to cause birth defects (or other reproductive

harm). (California Health & Safety code § 25249.5, et seq.)

UNPACKING

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

ASSEMBLY INSTRUCTIONS

NOTE: For additional information regarding the parts listed in the following pages, refer to

the Assembly Diagram near the end of this manual.

For technical questions, please call 1-800-444-3353.

Page 2SKU 95996

+ 2 hidden pages