9 FT. - 8 RIB SOLAR UMBRELLA
ASSEMBLY AND
OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
Materials 100% Green Polyester Fabric, UV treated, mildew resistant, vented
cover with eight ribs, 9 Ft. Umbrella spread. An aluminum pole with a
tilt mechanism of a 45 degree angle, left and right.
Solar Panel Measurements 5” Dial. x 1.54”H w/4” Lens Dia.
Batteries 1.2V NiCd Batteries-Qty. 4 (included)
Lighting Specifications 24 LED Bulbs 5/8” Dia., 8” Spacing on 8 Ribs, 3 Bulbs per Rib
Pole Dimensions Lower Pole: 41-3/8”L x 1-1/2” Dia. Upper Pole w/Crank Handle
Overall Dimension 105” Dia. Spread- 93”H (assembled)
Net Weight 14.30 Lbs.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
IMPORTANT SAFEGUARDS
READ AND UNDERSTAND ALL INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be followed including the following:
1.
2.
3.
4.
5.
6.
7.
Read all instructions.
Close supervision is necessary when this product is near children. Do not let
children play in or around this product unsupervised.
Extreme caution must be used when moving this product. For safety, collapse
the Umbrella before moving.
Do not use this product for other than intended use.
Maintain labels and nameplates on this product. These carry important informa-
tion. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Keep bystanders and children at a distance when operating this Umbrella.
CAUTION: Do not immerse in water.
SKU 95453 For technical questions, please call 1-800-444-3353. Page 2
8.
Do not set up this product if under the influence of alcohol or drugs. Read warn-
ing labels on prescriptions to determine if your judgement or reflexes are impaired
while taking drugs. If there is any doubt, do not attempt to use this product.
9.
10.
11.
12.
13.
Use eye protection when assembling this product. Wear ANSI approved safety
impact eye goggles. The ANSI approved safety impact goggles are available from
Harbor Freight Tools.
Do not attempt to assemble or use this product in moderate or heavy wind
conditions. Doing so may cause personal injury and/or damage to the umbrella
and personal property.
Check for damaged parts. Before using this product, carefully check that it will
operate properly and perform its intended function. Check for damaged parts and
any other conditions that may affect its operation. Service and maintenance should
be performed by a qualified technician. LED lights are designed to last for a very
long time. They should not need to be replaced.
Use the right product for the right job. There are certain applications for which
this product was designed. Use this product ONLY with a heavy duty stand (not
included), weighing at least 18 Lbs., and capable of firmly securing this Umbrella.
Do not use this product in a way for which it is not intended.
The warnings, precautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
SAVE THESE INSTRUCTIONS.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
SKU 95453 For technical questions, please call 1-800-444-3353. Page 3