OneSpace 60-5605T User Manual
OneSpace is a Trademark of Comfort Products, Inc.
™
ASSEMBLY INSTRUCTIONS
MODEL 60-5605T
SUPPLIER CODE: BJTJ
TAFT MESH BACK OVERSIZE 500LB CAPACITY EXECUTIVE CHAIR
CUSTOMER SERVICE
For fastest service on claims, requests for
replacement parts, or questions please visit our website at
www.comfortproducts.net/support
e-mail: customerservice@comfortproducts.net
Keep your sales receipt as documentation of your ownership.
CONTENTS
ITEMS ARE NOT SHOWN TO SCALE.
PARTS LIST
PART DESCRIPTION STOCK# QTY.
Back Cushion
1
Seat Cushion
2
3
Armrest (right)
4
Armrest (left)
Seat Plate
5
6
Seat Post
61-5605TBC
61-5605TSC 1
61-5605TRA
61-5605TLA
61-PLATE5600T
61-5605TPO
HARDWARE KIT
STOCK # 61-5605THA
PART DESCRIPTION QTY.
5/16 x 1 in.
A
1
1
1
1
1
5/16 x 1,1/2 in.
B
5/16 x 1,1/4 in.
C
5/16 x 1,3/4 in.
D
Allen Wrench 1
E
F
Screwcap 4
G
Arm Cover
2
2
4
4
2
7
8
Star Base
Caster
61-5605TSB 1
61-CAST5600T 5
REPLACEMENT PARTS
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT
WWW.COMFORTPRODUCTS.NET/SUPPORT AND REFERENCE THE MODEL NUMBER ON THE FRONT
OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED. THE
PART WILL NORMALLY BE SHIPPED WITHIN 48 HOURS.
2
ASSEMBLY INSTRUCTIONS
STEP 1
Insert the casters (8) into holes of the star base (7). Insert the
seat post (6) into the center hole of the star base (7).
6
7
8
NOTE: To install casters, apply
pressure to base of caster
using your thumb as shown
STEP 2
Align the seat plate (5) over the pre-drilled holes under the seat
cushion (2) (NOTE the position of the seat plate handle to the seat
cushion FRONT arrow). Attach the seat plate (5) to the seat
cushion (2) using two screws (A) and two screws (B) as shown.
Tight
en
securely with the allen wrench.
Front
5
B
A
2
STEP 3
Turn the seat cushion so that it is upright. Position the center hole
in the seat plate (5) over the seat post (6). Then carefully lower
the chair onto the seat post.
STEP 4
Attach the right (3) and left (4) armrests to the seat cushion (2)
using two screws (C) each. Do not fully tighten the screws. These
will be tightened after the back cushion is attached.
3
4
C
3
Loading...