Page 1
LP3
™
Wireless Portable Thermal Label Printer
™
LP3
The retail floor is no place for downtime. Constantly
reloading labels or paper, or getting a flashing low
attery light in the middle of a markdown is simply
b
unacceptable.
The LP3 3" wireless portable label printer from O’Neil
delivers greater paper capacity, longer battery life
and a range of wireless connectivity options for the
retail and manufacturing marketplace. And of course,
the reliability O’Neil is known for around the globe.
Greater Paper Capacity. The LP3 offers almost twice
the paper capacity of any printer in its class. It prints
from 1" to 3" label stock and can accommodate a wide
variety of labels and paper, including the heavy stock
necessary for hang tags and other specialty label
needs. The LP3’s side-load design allows for the
fastest and easiest paper loading of any printer on
the market. Users simply slide the roll into the printer,
pop on the end-cap, and the paper is loaded quickly
and trouble-free.
Greater Battery Power. The LP3 uses two standard
7.2V Lithium-Ion (Li-Ion), 2200 mAh rechargeable
batteries, providing twice the power capacity
available from competitive printers and eliminates
the need for constant recharging between
applications and in the middle of shifts. This is
important for all applications and especially critical
for battery-intensive wireless environments.
Built-In Battery Charging. When it comes to
batteries and battery charging, the LP3 offers yet
another significant benefit. Competitive printers use
expensive proprietary batteries, incorporating the
electronics or “intelligence” necessary for quick-
harging into the battery itself. The electronics for
c
quick charging in the LP3 are built-in to the printer,
not the battery, eliminating the need to purchase a
substantially higher-priced battery or recharging
station. Since all rechargeable batteries have a
limited life and must be replaced, this becomes
a considerable recurring cost and unnecessary
expense to the user. The only accessory required for
charging the LP3 is a low cost AC adapter.
Complete Line of Media and Supplies. O’Neil offers
a complete line of supplies for the LP3. Our Certified
Label Supply Program ensures optimum, troublefree performance from the LP3 and guarantees the
highest quality print output and image stability.
Choose from in-stock labels or customize media to
your specifications.
Rugged and Reliable. With uncompromising
standards, the LP3 is engineered throughout to
endure even the most punishing portable
applications. It can take all the bumps and knocks
inherent in the mobile workplace by withstanding
multiple 4' drops to concrete.
Two Year Warranty. The LP3’s rock-solid print
mechanism is proven to provide years of service
where other printers fail. The full two-year
warranty, even on the printhead
mind with our proven promise to stand behind
every product we sell.
*
, offers peace of
The new LP3 3" wireless
“
portable label printer
from O'Neil Product
Development meets the
requirements for the
retail and manufacturing
marketplace by providing
almost twice the paper
capacity and twice the
battery power of
comparable printers as
well as a full range of
wireless printing
capabilities.
”
Vertical Systems Reseller
Unmatched Wireless Printing
u
The LP3’
environments to leverage their significant
investment in existing infrastructure by
offering a variety of wireless connectivity
options. The LP3 is available with an
optional built-in 802.11b/g or integrated
Bluetooth
s wireless capabilities allow retail
®
version 1.2 compliant module.
www.oneilprinters.com
Page 2
Standard Features at a Glance
• Optional 802.11b/g or Bluetooth®networking technologies.
Twice the paper and battery capacity of competitive label printers.
•
• Label presenter for quick and easy peel-and-apply.
• Comes with the industry’s only standard two-year warranty - twice that of the competition!
Accommodates variable media (1” to 3”) including linered labels, paper and hang tags.
•
• Supports the printing of 1D bar codes and 2D symbologies.
• Supports international character sets, graphics and any Bitstream
®
bitmap font
• Easily transported by durable hand or shoulder strap.
• Powered by two 2200 mAh-capacity Lithium Ion (Li-Ion) batteries with an optional AC adapter
r cigarette lighter adapter for recharging.
o
Specification Highlights LP3
™
Portable Thermal Label Printer
*
*
.
™
LP3
Physical Characteristics
Dimensions 6.2" x 5.17" x 7.86"
Weight (printer only) 39.9 oz (1.13 kg)
Weight (w/ batteries & paper roll) 63.5 oz (1.80 kg)
Drop Specification 4 ft (1.22 m)
User Environment
Operating Temperature -4º F to 113º F (0º C to 45º C)
S
torage Temperature -40º F to 158º F (-40º C to 70º C)
Charging Temperature 41º F to 104º F (5º C to 40º C)
Relative Humidity 10% to 90% non-condensing
ESD Protection 8 kV Air, 4 kV Contact
Communications
Serial
802.11b/g
Frequency Band 2.4 to 2.4897 GHz
Data Rates Standard 802.11b/g rates
Network Standard IEEE 802.11b/g
Wireless Access Modes Infrastructure and ad hoc
Wireless Medium Direct Sequence Spread Spectrum (DSSS)
Authentication Open or Shared key
Security Protocols 40 bit WEP, 128 bit WEP, WPA, LEAP, EAP-FAST,
Network Support DHCP
Remote Management Support Compatible with the O’Neil Printer Management
®
Bluetooth
Network Environment Ad hoc or piconet network environments
Supported Versions v1.2 (compatible with v1.1 devices)
Print Technology
Printhead Direct thermal, 203 dots per inch (8 dots per mm),
Printhead Warranty 2 years*
Print Mechanism Speed
Media
Type Labels 0.75” - 3” linered labels w/ Q-mark or gap sensing
For optimum print quality & printer performance, use Certified O’Neil supplies.
Capacity 3.5" (88.9 mm) maximum roll diameter (O.D.)
Roll Width 1”- 3” (25.4 mm - 76.2 mm)
Thickness
Paper Direct thermal receipt paper (standard, premium,
ags
Hang T
(157.5 x 131.3 x 199.6 mm)
RS-232; 460.8 kbps
plus others available
Console and other remote management systems
2.84” (72 mm) print width
2” per second (51 mm per second)
, long-life, image protect, hi-temp, and all
heavy duty
weather), synthetic media, UV coated media
2” hang tags
1" (25.4 mm) I.D. core
0.002” (0.05 mm) minimum
0.007” (0.18 mm) maximum
World Headquarters
O‘Neil Product Development
8 Mason, Irvine, CA 92618-2705
Ph: 949.458.0500
Fx: 949.458.0708
email: info@oneilprinters.com
WWW.ONEILPRINTERS.COM
Power Source
Batteries (2) 7.2V Lithium-Ion (Li-lon), 2200 mAh
DC Input 12-15V, built-in spike and surge protection
Endurance 802.11b/g Prints approx. 1095 – 3" x 2.5" labels on a single
Bluetooth Prints approx. 1674 – 3" x 2.5" labels on a single
Recharg ing 4-5 hours from AC adapter or cigarette lighter adapter
Fonts & Languages
M
emory Capacity Flash Memory: 4 MBytes
Standard Fonts 5.5CPI, 7.2CPI, 10.7CPI, 18.5CPI 20.4CPI & 22.6CPI
Optional Characters Arabic, Asian (incl Big 5, Simplified Chinese and Shift JIS),
Bar Codes Linear Codabar, Code 39, Code 93, Code 128, EAN-8, EAN-13,
2D symbologies AZTEC, PDF417, QR
Graphics Supports storage of graphics/logos in Flash
Software
Protocol Line Printer Mode, Easy Print
Device Management O’Neil Printer Management Console (OPMC)
Drivers Windows CE and Desktop
Label Designers NiceLabel, BarTender®, DP Designer
Software Development Kit BlackBerry
Agency Approvals
FCC B, CE, UL/cUL
Warranty
2 years (including printer case and printhead*)
Options / Accessories
• AC Adapter • Dual External Battery Charger
• Cigarette Lighter Adapter
• Cleaning Cards and Kits
• Data Cables for Hand-Held Devices • Spare Batteries
• DB9 F Download
* When used with approved media grades.
echnical Support for more information.
** Contact T
Specifications are subject to change without notice.
™
LP3
and Easy Print®are trademarks of O’Neil Product Development, Inc. All other product and
company names are trademarks, service marks or registered trademarks of their respective owners.
Copyright 2007, O’Neil Product Development, Inc.
rev. 7/07 Made in the U.S.A.
(for a total of 4400 mAh)
battery charge (18.3 hours)
battery charge (26.7 hours)
LED indicator for charging status
Ram Memory: 2 MBytes
(additional fonts available)
Greek, Hebrew, OCRA, OCRB, Unicode subset including
Latin & Thai (additional international characters available)
Interleaved 2 of 5, MSI/Plessey, UCC/EAN-128, UPC-A,
UPC-E
memory and transient “print once” graphics
®
• Paper/Labels
• Shoulder Strap
Loading...