One for all SPORT User manual

Retain For Future Reference

“SPORT”

USER GUIDE & CODE BOOK

Universal Remote

ABOUT YOUR ONE FOR ALL

The Keypad 2

INSTALLING THE BATTERIES

4

SETTING UP THE ONE FOR ALL

Setting Up Your Device 5
Using the AUX Key 6

ADVANCED FEATURES

Reassigning the Device Keys 7
Using the Scan key 8
Teletext and 9
Controlling Colour and Brightness 10
Sleeptimer 11
Punch-Through 13
Preventing Accidental Code Changes 13

TROUBLE-SHOOTING

Searching for Your Code 14
Code Blink Out 15
Helpful Hints 16
Consumer Help-Line 17

SET-UP CODES

Quick Code Reference 18
TVs 19
Videos 23
Satellite Receivers 25
Cable Boxes 27

Note: If you’re having problems operating all the functions
of your device, don’t worry, your ONE FOR ALL may just
need customising for your model type. Just call our
consumer help-line and we’ll get you on the right track.

Table of Contents

1

LED
Power

AUX

Volume
Mute

Programme

Fast Forward
Record

Stop

VCR

SET

Number Keys

Scan Key

SAT

Play

Teletext

Rewind

Pause

TV

2

Your “ONE FOR ALL Sport” Package contains:

Your ONE FOR ALL Remote
Your ONE FOR ALL Manual

Your manual is divided into two parts: set-up instructions and
device codes. You will need your manual to set up your new
ONE FOR ALL so please be sure to keep it.

Your ONE FOR ALL needs four new AAA/LR03 alkaline
batteries.

Your ONE FOR ALL can operate four devices: a Television, a
Video Recorder, a Satellite Receiver and a second Television,
Video or Satellite Receiver. Your ONE FOR ALL can also
operate Cable Converters.

The Keypad

Key Function

LED LED

The LED (Light Emitting Diode) flashes red to
show the remote is working.

Power

The Power key controls the same function as on
your original remote.

Device Keys

The TV, VCR, SAT and AUX keys select the home
entertainment device to be controlled. For
example pressing the TV key allows the remote
to control the functions of your Television,
after pressing VCR you can operate your Video
Cassette Recorder and the SAT key operates
your Satellite Receiver or Cable Converter. The
AUX key operates a second Television, Video
Recorder or Satellite Receiver.

SET Key

The SET key is used to set up your ONE FOR ALL
and to access special functions.

Scan

The Scan key allows you to easily browse
through the programmes on your Television,
Video Recorder, Satellite Receiver and Cable
Converter. See page 8 for more information.

Volume, Programme

The Volume and Programme keys control the
two most frequently used functions of your
Television and Satellite Receiver. They operate
just as those on your original remote.

TV

AUX

SAT

VCR

SCAN

About Your ONE FOR ALL

SET

Key Function

Mute

The Mute key operates the same function it did
on your original remote.

Number Keys

The Number keys (0-9, 10) provide functions
just like your original remote, such as direct
access programme selection. If your original
remote uses one/two digit input switching
(-/-- symbol), this function can be obtained by
pressing the -/-- key, which is the same as the
10 key.

Video Recorder Keys

After pressing the VCR key, the Video Recorder
keys operate the functions of your Video
Recorder. To prevent accidental recording, the
Record key must be pressed twice to start
recording.

Teletext Keys

After pressing the TV key, the top row of the
Video Recorder keys are used to operate the
main teletext functions. The symbols above the
keys are for teletext. The Text keys are used to
access the teletext functions of your Television.
Of course, your Television must be teletext
capable. For an explanation of the teletext
symbols, please refer to page 9 of this manual.

3

-/--

About your ONE FOR ALL

MUTE

4

Your ONE FOR ALL needs four new AAA/LR03 alkaline
batteries.

Remove the battery cover from the
back of your ONE FOR ALL.

Match the batteries to the + and ­marks inside the battery case, then
insert the batteries.

Press the battery cover back into
place.

2

3

Note: In order to avoid having to reprogramme your ONE
FOR ALL after you remove the batteries, you will need to
insert new batteries within 15 minutes. Also it is best that
you do not use rechargable batteries.

Installing the Batteries

1

Setting Up Your Device

To set up the ONE FOR ALL for your television:

Find your Television code in the
Set-Up Code section (starting on page 19).
Codes are listed by brand name.
The most popular code is listed first.
Make sure your Television is switched on.

Press and release your ONE FOR ALL’s TV
key, then press and hold the SET key
until the red light blinks twice (the light
will blink once then twice).

Enter your three-digit TV code using
the number keys. The red light will blink
twice.

Now, aim your ONE FOR ALL at your
Television and press POWER.
If your Television switches off, your ONE
FOR ALL is ready to run your Television.

Write your code in the three boxes on page 18, for quick, easy
reference.

To control your Television, press TV first.

5

Setting Up The ONE FOR ALL

1

2

3

4

ONE FOR ALL

A-Mark
Admiral
Anam

Anam National
AOC

Archer
All & Howell

003
179, 180, 016, 047, 093

180
055, 161

019, 030, 052, 003, 136
003

016
030, 046, 186, 056

000
000, 000, 000, 046

TV

Important notes:

- To set up your Video Recorder or Satellite, follow the same
instructions above, only press the VCR or SAT key during
step 2.

- To set up your Cable Box, follow the instructions above
only press the SAT key during step 2.

- If your Video’s original remote control does not have a
power key, press PLAY instead of POWER during step 4.

- If your Device does not respond, follow steps 1 - 4 with
each code listed for your brand. If none of the codes listed
for your brand operate your Device, then try the search
method described on page 14, even if your brand is not
listed at all.

SET

6

Setting Up the ONE FOR ALL

Using the AUX Key

The AUX key on your ONE FOR ALL can be used to control a
second Television, Video Recorder or Satellite Receiver.

To set up the AUX key to control a second TV:

Press and hold the SET key until the
red light blinks twice (the light will blink
once then twice).

Press 9 9 2 TV AUX.

Find your Television code in the Set-Up
Code section (starting on page 19). Codes
are listed by brand name. The most
popular code is listed first. Make sure
your Television is switched on.

Press and release your ONE FOR ALL’s

AUX key, then press and hold the SET
key until the ONE FOR ALL’s red light

blinks twice.
Enter your three-digit TV code using

the number keys. The red light will blink
twice.

Now, aim your ONE FOR ALL at your
Television and press POWER. If your
Television switches off, your ONE FOR
ALL is ready to run your Television. When
you want to control your second TV,
press AUX first.

1

2

3

4

ONE FOR ALL

A-Mark

Admiral
Anam

Anam National
AOC

Archer
All & Howell

003
179, 180, 016, 047, 093

180
055, 161

019, 030, 052, 003, 13
003
016

030, 046, 186, 056
000

TV

AUX

AUX

5

6

Important notes:

- To set up your Video Recorder or Satellite, follow the same
instructions above, only press the VCR or SAT key during
step 2.

- To set up your Cable Box, follow the instructions above
only press the SAT key during step 2 and 4.

- If your Video’s original remote control does not have a
power key, press PLAY instead of POWER during step 6.

- If your device does not respond, follow steps 3 - 6 with
each code listed for your brand. If none of the codes listed
for your brand operate your Television, Video Recorder or
Satellite Receiver, then try the search method described on
page 14, even if your brand is not listed at all.

SET

SET

7

Reassigning the Device Keys

If you want, you can change any of the device keys (TV, VCR,
SAT or AUX) to operate another type of device. The chart
below lists how to change the keys and to set up that device:

To Change: Press:

SET*992 VCR TV,
then TV SET* Code

SET*992 SAT TV,
then TV SET* Code

SET*992 TV VCR,
then VCR SET* Code

SET*992 SAT VCR,
then VCR SET* Code

SET*992 TV SAT,
then SAT SET* Code

SET*992 VCR SAT,
then SAT SET* Code

SET*992 TV AUX,
then AUX SET* Code

SET*992 VCR AUX,
then AUX SET* Code

SET*992 SAT AUX,
then AUX SET* Code

*

Hold down the SET key until the red light blinks twice.

To reset a device key to its original function, press:

TV key MA*992
VCR key MA*992

SAT key MA*992
AUX key MA*992

*

Hold down the SET key until the red light blinks twice.

Advanced Features

TV

SAT

AUX

VCR

AUX

TV

AUX

VCR

SAT

TV

SAT

SAT

VCR

TV

VCR

SAT

TV

VCR

TV

TV

VCR

SAT

AUX

VCR

SAT

AUX

to

to

to

to

to

to

to

to

to

SET

SET

SET

SET