impleSet is a quick and easy way of setting up the remote to control the most popular brands of
S
each device type with only a few key presses, typically in under a minute per device.
or each Device type, there is a list of the top brands, each with a number assigned to it,
F
for example 6 for a Samsung TV. Locate your device and brand in the list that follows:
TV
1 Alba / Bush / Goodmans
2 Grundig
G
3 L
anasonic
4 P
5 Philips
To set up your device
1. Turn on your device (not on standby) and point the OFA remote towards it.
2.Hold down MAGIC until the LED blinks twice.
6 Samsung
7 Sharp
ony
8 S
CL / Thomson
9 T
0 Toshiba
Open the battery door.
Insert 2 AAA batteries.
SMART: Access internet and
Smart features of your TV
BACK: Back one step in
the Menu of the current device
VOL: Volume Up, Down and
Mute
16:9: Adjust the Aspect
Ratio (screen size) of your TV
LIST: Displays a list of
recorded programmes
EXIT: Exit from the Menu of
the current device
MENU: Show the menu of
the current device
PP: Previous Program, Last
Channel
+/-: Channel Up and Down
3D: Access 3D functionality if
applicable
Red, Green, Yellow, Blue –
Fastext/Quick access keys
PLAYBACK: Playback keys
for the current device
3.Hold down the digit for your brand and device as listed above
(e.g. 6 for Samsung TV).
4. The remote will send Power every 3 seconds until your device switches off.
5. As soon as your device switches off, release the digit.
6. The LED will blink twice and go out. The remote should now operate your device.
•If you nd one or more keys do not work as you expect, start again at step 1 – the remote will
start with the next code in the memory.
HOW TO SET UP YOUR REMOTELEARNING
2 - 5 CM
our One For All remote control can learn any function from any other working remote control.
B SET UP BY CODE
f your brand is not listed in section A, you can set up your device by trying codes individually.
I
To do this:
urn your device on (not on standby).
1. T
2.Locate the brand of your device in the code list (pages 74-77). Codes are
3.Hold down MAGIC until the LED blinks twice.
listed by Device Type.
Y
his can be useful if you are missing one or more functions from your original remote control and
T
would like to add them to the ONE FOR ALL.
You can also learn a complete device if you can’t nd a code.
o learn, rstly make sure you have all your original remote controls to hand, and that they have
T
orking batteries in. To learn functions, the original remote should be approximately 3cm from
w
the OFA remote, pointing towards it as shown below:
4.E
nter the rst 4 digit code listed for your brand (e.g. 0556 for a Bennett
V).
T
5. The LED will blink twice and go out.
6.Now aim the remote towards your device and press the POWER key.
7. If the device turns off, your remote is ready to use. If not, repeat steps 3-6 with the next code
in the list.
•Some codes are quite similar. If you nd that one or more keys do not operate as you expect,
try again from step 3 with the next code in the list.
1.Hold down MAGIC until the LED blinks twice.
2.P
ress 975 – the LED will blink twice.
3.Press and release the key you want to learn a function onto (for example
the 3D key) – The red LED will blink continuously.
4.Press and release the key on the original remote.
5. The LED will blink twice to indicate the key has been learned correctly.
6. Repeat steps 3 and 4 for each key you want to learn – remember you can learn from multiple
remotes, but only one function per key.
7.When you learned all the functions you require, press and hold the
MAGIC key until the LED blinks twice and turns off.
HINTS
•If the LED shows one long blink at step 5, the function was not learned correctly,
please try again from step 3.
•If you nd one or more keys don’t work properly after set up, you can re-enter the learning
mode at any time by repeating the procedure from step 1.
TO DELETE A LEARNED FUNCTION, THE PROCEDURE IS:
1. Hold down MAGIC until the LED blinks twice.
2. Press 976 – the LED will blink twice
3. Press the key to delete twice – the LED will blink twice.
Repeat the above procedure for each key you want to delete.
PRODUCT DISPOSAL
The crossed out wheeled bin symbol on this product ensures that this product is manufactured
sing high quality components that can be recycled and reused according to European Directive
u
2002/96/EC. Please do not dispose this product with your normal household waste but inform yourself about the local separate collection for electrical and electronic products to dispose this product
correctly. This will help preventing potential negative effects on the environment and/or human
health.
BATTERY DISPOSAL and safety
Please do not dispose your batteries with your normal household waste but inform yourself about
the local separate collection for empty batteries to dispose them correctly. This will help preventing
potential negative effects on the environment and/or human health.Keep batteries away from re,
out of direct sunlight, and away from other sources of heat.
UNIVERSAL ELECTRONICS INC/ONE FOR ALL warrants to the original purchaser that this product
will be free from defects in materials and workmanship under normal and correct use for a period
of one (1) year from the date of original purchase. This product will be replaced free of charge if it
has been proven to be defective within the one (1) year warranty period. This warranty does not
cover cartons, carrying cases, batteries, broken or marred cabinets or any other item used in connection with the product. Any further obligation than listed above is excluded. Please notice that
we need your purchase receipt so that we may establish your eligibility for service. If you have
bought this product for purposes which are not related to your trade, business or profession, please
remember that you may have legal rights under your national legislation governing the sale of consumer goods. This guarantee does not affect those rights.