One for All Little Easy User Manual

“Little Easy’’

Ô

USER GUIDE & CODE BOOK

URC-2560

Universal Remote

Retain For Future Reference

Table of Contents

About Your LITTLE EASY...................................... 3

Features and Functions........................................ 3

Installing the Batteries......................................... 6

Setting Up Your Device ........................................ 7

The AUX Key:

Setting Up a Second Television or Video ......... 8

The Search Method.............................................. 10

Getting Codes from the LITTLE EASY.................. 11

Changing the Device Keys ................................... 12

The Scan Key.......................................................... 13

Colour & Brightness.............................................. 14

Punch-Through (Control Across Device Types) ... 14

More On Teletext.................................................. 15

Sleeptimer............................................................. 16

Preventing Accidental Code Changes................. 19

Trouble-Shooting.................................................. 20

Consumer Help-Line............................................. 21

Quik Code Reference ........................................... 22

Set-Up Codes

Set-Up Codes For Televisions............................. 23

Set-Up Codes For Video Recorders................... 28

■ ■ ■ ■

2

■ ■ ■ ■

Note: If you’re having problems operating all the
functions of your device, don’t worry, your ONE FOR
ALL may just need customising for your model type.
Just call our consumer help-line and we’ll get you on
the right track.

About Your LITTLE EASY

Your LITTLE EASY Package contains:

Your LITTLE EASY Remote
Your LITTLE EASY Manual

Your manual is divided into two parts: set-up instruc-tions
and device codes. You will need your manual to set up
your new LITTLE EASY so please be sure to keep it.

Your LITTLE EASY needs two new AAA/LR03 alkaline
batteries.

Your LITTLE EASY can operate three devices: a
Television, a Video and a Second Television or Video
Recorder.

Features and Functions

Key Function
LED The LED (Light Emitting Diode) flashes

red to show the remote is working.

Power

The Power key controls the same
function as it did on your original
remote.

MAGIC Key

The MAGIC key is used to set up your
LITTLE EASY and to access special
functions.

Device Keys

The TV, VCR and AUX keys select the
home entertainment device to be
controlled. For example pressing the
TV key allows the remote to control
the functions of your Television, after
pressing VCR you can operate your
Video Cassette Recorder and the AUX
key operates a second Television or
Video Recorder.

■ ■ ■ ■

■ ■ ■ ■

3

TV

VCR
AUX

Number Keys

The Number keys (0-9, 10) provide
functions just like your original
remote, such as direct access
programme selection. If your original
remote uses one/two digit input
switching (-/-- symbol), this function
can be obtained by pressing the -/-­key, which is the same as the 10 key.

Volume, Programme
The Volume and Programme keys control
the most frequently used functions of
your Television. They operate just as
those on your original remote.

Scan

The Scan key allows you to easily
browse through the programmes on
your Television and Video Recorder.
See page 13 for more information.

Mute

The Mute key operates the same

function as it did on your original
remote.

Video Recorder Keys

After pressing the VCR key, the Video
Recorder keys operate the functions of
your
Video Recorder. To prevent accidental
recording, the Record key must be
pressed twice to start recording.

Teletext Keys

After pressing the TV key, the top row
of the Video Recorder keys are used to
operate the main teletext functions.
The symbols above the keys are for
teletext. The Text keys are used to
access the teletext functions of your
Television. Of course, your Television
must be teletext capable. For an
explanation of the teletext symbols,
please refer to page 15 of this manual.
For a detailed explanation on how
teletext works, please refer to the
manual of your television set.

■ ■ ■ ■

■ ■ ■ ■

4

■ ■ ■ ■

■ ■ ■ ■

5

Stop

LED

Mute

Number Key

MAGIC Key

Scan Key

Teletext Keys

Rewind

Play

Fast Forward

Power

Volume

-/--Key

Pause

Programme

Record

Device Keys

Installing the Batteries

Your LITTLE EASY needs two new AAA/LR03 alkaline
batteries.

Remove the battery cover
from the back of your LITTLE
EASY.

Match the batteries to the +
and - marks inside the
battery case, then insert the
batteries.

Press the battery cover back
into place.

■ ■ ■ ■

■ ■ ■ ■

6

1

3

2

Note: In order to avoid having to reprogramme your
Little Easy after you remove the batteries, you will
need to insert new batteries within 3 minutes. Also
it is best that you do not use rechargable batteries.

Setting Up Your Device

To set up the LITTLE EASY for your Television:

Press and release your LITTLE
EASY’s TV key. Then press

and hold down the MAGIC
key until the LITTLE EASY’s

red light blinks twice. (The
light will blink once and then
twice.)

Enter your three-digit TV
code using the number keys.

The red light will blink twice.
Now, aim your LITTLE EASY

at your Television and press
POWER. If your Television
switches off, your LITTLE
EASY is ready to run your
Television.

Write your code in the three boxes on page 22, for
quick, easy reference.

To control your Television, press TV first.

■ ■ ■ ■

■ ■ ■ ■

7

2

3

1

Find your Television code in
the Set-Up Code section
(starting on page 23). Codes
are listed by brand name. The
most popular code is listed
first. Make sure your
Television is switched on.

4

Important notes:
– To set up your Video Recorder, follow the same
instructions above, only press the VCR key during
step 2.
– If your Video’s original remote control does not
have a power key, press PLAY instead of POWER.
– If your Device does not respond, follow steps 1-4
with each code listed for your brand. If none of the
codes listed for your brand operate your Device, then
try the search method described on page 10, even if
your brand is not listed at all.

ONE FOR ALL

nseher

Fer

Admiral 087 093 264

163
Agazi 264
AGB 075
Aiko 216 009
Akai 208 351 037

191 163 284

009 218
Akiba 218

TV

The AUX Key: Setting Up

a Second Television or Video

The AUX key on your LITTLE EASY can be used to
control a second Television or Video Recorder.

To set up the AUX key to control a second TV:

Press and hold down the
MAGIC key until the red

light blinks twice. (The light
will blink once and then
twice.)

Press 9 9 2 TV AUX.

Press and release your LITTLE
EASY’s AUX key. Then press

and hold down the
MAGIC key until the LITTLE

EASY’s red light blinks twice.

(continued)

1

2

3

9 9 2

Find your Television code in
the Set-Up Code section
(starting on page 23). Codes
are listed by brand name.
The most popular code is
listed first. Make sure your
Television is switched on.

4

■ ■ ■ ■

■ ■ ■ ■

8

TV

AUX

ONE FOR ALL

Fernseher

Admiral 087 093 264

163
Agazi 264
AGB 075
Aiko 216 009
Akai 208 351 037

191 163 284

009 218
Akiba 218

AUX

Enter your three-digit TV­code using the number keys.

The red light will blink twice.

Now, aim your LITTLE EASY
at your Television and press
POWER. If your Television
switches off, your LITTLE
EASY is ready to run your
Television.

Write your code in the three boxes on page 22, for
quick, easy reference.

■ ■ ■ ■

■ ■ ■ ■

9

5
6

Important notes:
– To set up your Video Recorder, follow the same
instructions above, only press the VCR key during
step 2.
– If your Video’s original remote control does not
have a power key, press PLAY instead of POWER.
– If your Device does not respond, follow steps 3-6
with each code listed for your brand. If none of the
codes listed for your brand operate your Device, then
try the search method described on page 10, even if
your brand is not listed at all.

The Search Method

If your Television or Video Recorder does not respond
to the LITTLE EASY after you have tried all the codes
listed for your brand, try the Search Method. The
Search Method may also work if your brand is not
listed at all.

Let’s say you cannot get your LITTLE EASY to control
your Television:

Switch your Television on.

Press the TV key on your LITTLE
EASY.

Aim your LITTLE EASY at your
Television. Press and hold
down MAGIC until the LITTLE
EASY’s red light blinks twice.
Then, press 9 9 1. The red light
will blink twice.

Now, alternate between TV and
POWER, over and over, until
your Television turns off. You
may have to press these keys
many times, so please be
patient. It could take up to 5
minutes. Remember to keep
pointing your LITTLE EASY at
your Television when you pr ess
the POWER and TV keys.

When your Television turns off,
press MAGIC. Don’t forget,

press MAGIC as soon as your
Television turns off. Now your LITTLE EASY is ready to
run your Television.

To search for the code for your Video Recorder, follow
the instructions above, only press the VCR key during
steps 2 and 4.

■ ■ ■ ■

■ ■ ■ ■

10

4

3

2

1

9 9 1

5

Note: If your Video’s original remote control does not
have a power key, press PLAY instead of POWER when
searching for your code.

TV

TV