One for All 6-DEVICE PVR User Manual

6-DEVICE PVR

Universal Remote Control

User’s Guide

OFA 6 PVR 2/15/03 9:25 AM Page 1

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Features And Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Programming Device Control . . . . . . . . . . . . . . . . . . . . . . . . 9

Programming DVD Player/VCR Combo Control. . . . . . . . 10

Searching For Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Programming Master Power . . . . . . . . . . . . . . . . . . . . . . . . 12

Programming The Power Key For Master Power. . . . . . . . . . . . 12

Operating Master Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Clearing Master Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using Keymover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Programming Keymover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Restoring Keymoved Keys To Default Settings. . . . . . . . . . . . . 14

Restoring A Single Keymoved Key . . . . . . . . . . . . . . . . . . . . . . 14

Restoring All Keymoved Keys In A Single Mode . . . . . . . . . . . . . 15

Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . . . . . . . . 15

Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Locking Volume Control To One Mode

(Global Volume Lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Unlocking Volume Control For A Single Device

(Individual Volume Unlock) . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Unlocking All Volume Control

(Restoring Default Setting ) . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Setup Codes for Audio Receivers . . . . . . . . . . . . . . . . . . . . . . 17

Setup Codes for Cable Boxes (Converters) . . . . . . . . . . . . . . . 18

Setup Codes for CD Players . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Setup Codes for DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . 20

Setup Codes for DVD Player/VCR Combos. . . . . . . . . . . . . . . . 21

Setup Codes for PVRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Setup Codes for PVR/Satellite Receiver Combos. . . . . . . . . . . 22

Setup Codes for Satellite Receivers . . . . . . . . . . . . . . . . . . . . 22

Setup Codes for TVs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Setup Codes for TV/DVD Player Combos . . . . . . . . . . . . . . . . . 27

Setup Codes for TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . 27

Setup Codes for VCRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

About Upgrading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Upgrade Exclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Instructions To The User . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

2

OFA 6 PVR 2/15/03 9:25 AM Page 2

INTRODUCTION

The One For All 6-Device PVR Universal Remote
Control (URC-6131) is designed to remotely operate
up to six home entertainment devices and features
intuitive and easy-to use buttons to operate PVR
(Personal Video Recorders) and DVD components.Its
sophisticated technology will allow you to consolidate all
of your original home entertainment remote controls
into one easy-to-use product.Advanced features include:

• Intuitive buttons to allow easy access to your PVR or
DVR (Digital Video Recorder) functions and menus

• Direct code setup for easy device programming

• Step and Set code setup and Code Verification for an
alternate way to program devices

• Master Power function for master on/off control of
all of your equipment with a single keystroke

• Volume Lock to lock volume controls to one mode or
individual modes

• Device Key Re-Assignment to remotely control
a second (duplicate) device

• Color-coded keys to quickly locate popular functions

• Code library for popular video and audio devices

The URC-6131 remote control requires two (2) new
AA alkaline batteries (not included) and some easy
programming to control your devices.For best results,
please read and perform all instructions listed here.
Also,keep these instructions for future reference.

3

OFA 6 PVR 2/15/03 9:25 AM Page 3

4

FEATURES AND FUNCTIONS

Use the illustration below to locate features on the
One For All 6-Device PVR Universal Remote Control
(URC-6131) and then study the Key Charts (on the next
three pages) to learn how they function.

To find out what type of devices can be controlled by
each device key after programming,see the Device
Ta b l e on page 7.

OFA 6 PVR 2/15/03 9:25 AM Page 4

5

Key Charts

When the LED (red light) blinks,the
remote control is working and (after
programming) is sending signals.

Press

TV, PVR,DVD, CBL/SAT,AUD,

or

VCR once to select a desired

home entertainment device
to control. Also see the Device Table
on page 7.

Press

POWER once to turn on or off

the selected device. For master
power control,see Programming
Master Power on page 12.

Press

MENU once to display your

selected device’s main menu.For
PVRs, use PVR Menu.

Use

INFO to display the current

channel and program information.

Use

GUIDE to display your selected

device’s program guide or setup
menu.

Use

EXIT to exit from your selected

device’s guide or menu.

Use the cursor keys to move the
cursor in the program guide and
menu screens.

Use

SELECT to choose options from

your selected device’s menu or guide.

In the AUD mode, use SELECT to set
the surround sound.Use

▲ (or ▼)

to adjust the volume higher (or
lower).Use (or ) to adjust the
balance left (or right).

Use

VOL+ (or VOL-) to raise (or

lower) the sound volume.

Use CH+ (or CH-) to select the next
higher (or lower) channel.

Press Mute once to turn the sound
off or on.

Use to command your PVR to
instantly replay the last 7 seconds
of a program you are viewing.

continued on next page...

▲

▲

OFA 6 PVR 2/15/03 9:25 AM Page 5

6

FEATURES AND FUNCTIONS

Key Charts (continued)

Press Prev. once to recall the last-
viewed channel and to page back
one screen on the main menu.

In the

AUD mode, use Prev. to select

the receiver band.

Use or to perform the Thumbs
Down or Thumbs Up feature on
your Tivo/PVR device.

Press

PVR Menu once to turn the

PVR’s main menu on or off.

Use to command your PVR to
skip or advance through a recorded
program scene or commercial.

Use the transport keys to control
your VCR, PVR, DVD player, or VOD
(Video On Demand) if available on
your cable or satellite service.

Press

REC twice to record a PVR or

VCR program.

Use

Audio/CC to select an alternate

audio channel (e.g.,Spanish) or
closed captions,if available on your
cable/satellite service or DVD.

Press

SUBT. once to turn subtitles

on or off, if available.

Use

ANGLE/SLEEP to perform the

angle function on your DVD player
or to set the sleep timer on a
selected device if equipped with
this feature.

Use for slow motion playback
on a VCR, PVR,or DVD player
equipped with this feature. Press

PLAY to cancel slow motion.

Use the keypad (

1 ~ 9 and 0) to

directly select channels (e.g.,

009

or 031).

In the

AUD mode, use the keypad

(

1 ~ 9 and 0) to select audio sources

1 through 10.

OFA 6 PVR 2/15/03 9:25 AM Page 6

7

Press

ENTER once after entering

the channel numbers on some TVs.

Use TV/VID to switch the TV’s input
to view TV or video programs.

Use

PIP to switch the Picture-In-

Picture feature on or off (if available
on your TV).

Use

Swap to switch images and

sound between the main and
window pictures.

Use

Move to move the window

picture to different positions in the
main picture.

Use

SET for all programming

sequences.

Device Table

NOTE: Please refer to the table below when performing the
instructions in “Programming Device Control” on page 9 or
“Programming DVD Player/ VCR Combo Control”on page 10.

After programming,the One For All 6-Device PVR
Universal Remote Control will be able to control the
following types of devices:

NOTE:Audio Receiver/DVD Player Combos (i.e., Home
Theater In A Box) are listed in “Setup Codes For Audio
Receivers” on pages 17 and 18.

DEVICE KEY CONTROLS THESE TYPES OF DEVICES

Te l e v i s i o n s

PVRs (Personal Video Recorders)

Cable Boxes (Converters), Satellite Receivers,
or Satellite/PVR Combos

VCRs or TV/VCR Combos

DVD Player,DVD Player/VCR Combos, or
TV/DVD Player Combos

Audio Receivers or CD Players

OFA 6 PVR 2/15/03 9:25 AM Page 7

INSTALLING BATTERIES

1. On the remote control’s back, push the tab

and lift off the battery cover.

2. Obtain two (2) new AA alkaline batteries.

Match the + and – marks on the batteries
to the + and – marks in the battery case,
then insert the new batteries.

3. Press the battery cover back into place.

The tab should click when the cover is
locked.

4. Test the remote control by pressing

any mode key (e.g.,

TV). If the batteries are

inserted correctly, the

LED (red light) will

blink once.

NOTE:When batteries need replacement, the remote control
will stop operating. Remove the old batteries and insert new
ones within 10 minutes to ensure all of your programming
information is restored.

8

❶

❸

❷

❷

OFA 6 PVR 2/15/03 9:25 AM Page 8

PROGRAMMING DEVICE CONTROL

The One For All 6-Device PVR Universal Remote Control
is preprogrammed at the factory to operate an RCA TV,
VCR,and satellite receiver, a Philips Tivo PVR,a Toshiba
DVD player, and a Pioneer audio receiver/amplifier. To
control devices other than the default brands, perform
the following steps; otherwise skip this section:

NOTE: For DVD Player/VCR Combo control, see the next page.

1. Turn on a desired device (e.g.,VCR or

DVD player) and,if applicable, insert
media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely
before proceeding. Highlight or write down the
codes and device you wish to program before
starting step 2.

2. On the remote control,press a device key

once (i.e.,

TV,PVR,DVD,CBL/SAT,AUD,or VCR).

NOTE: To program control of a cable box or
satellite receiver, press CBL/SAT once.

NOTE: To program control of a CD player or
audio receiver,press AUD once.

NOTE: To program control of a TV/VCR Combo,
press VCR once. After programming, you will be
able to control channel selection,volume, and
VCR functions.

NOTE: To program control of a TV/DVD Player
Combo, press DVD once. After programming,
you will be able to control channel selection,
volume, and DVD functions.

3. Press and hold SET until the LED (red light)

blinks twice, then release

SET.

4. Use the Manufacturer’s Codes (starting on

page 17) to locate the type of device and
brand name and then enter the first four­digit code for your device. If performed
correctly, the

LED will blink twice.

NOTE: If the LED did not blink twice,repeat steps
2 through 4 and enter the same code again.

5. Aim the remote control at the device and

press

POWER once. The device should turn

off. If it does not, repeat steps 2 through 5,
trying each code for your brand until you
find one that works. If it still doesn’t work,
try Searching For Your Code on page 11.

NOTE: If the device does not have a POWER
key,press the (Play) key.

continued on next page...

9

OFA 6 PVR 2/15/03 9:25 AM Page 9

PROGRAMMING DEVICE CONTROL
(continued)

6. Repeat steps 1 through 5 (on the previous

page) for each device you want to control.
For future reference, write down each
working device code in the following boxes:

TV Code:

PVR Code:

DVD Code:

CBL/SAT Code:

AUD Code:

VCR Code:

PROGRAMMING DVD PLAYER/VCR
COMBO CONTROL

1. Turn on the DVD Player/VCR Combo and

insert a DVD.

NOTE: Please read steps 2 through 4 completely
before proceeding. Highlight or write down the
codes and device you wish to program before
starting step 2.

2. On the remote control,press DVD. Next,

press and hold

SET until the LED (red light)

blinks twice, then release

SET.

3. Use the Setup Codes For DVD Player/VCR

Combos (on page 21) to locate the brand

name and then enter the first four-digit
code for your device. If performed
correctly, the

LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps
2 through 4 and enter the same code again.

4. Aim the remote control at the device and

press

POWER once. It should turn off.If it

does not, repeat steps 2 through 4, trying
each code for your brand until you find one
that works.If it still does not work, try

Searching For Your Code on the next page.

NOTE: If the device does not have a POWER
key,press the (Play) key.

10

OFA 6 PVR 2/15/03 9:25 AM Page 10

5. If you’ve located a setup code that works,

but it also has a separate VCR code, you’ll
also need to program it into the remote
control to access VCR controls as follows:

a. Press

VCR once.Then press and hold

the

SET key until the LED blinks twice.

b. Enter the VCR code for your DVD

Player/VCR Combo. If correct, the

LED

will blink twice.

NOTE: If a separate VCR setup code is not listed,
you can use the VCR key to program a separate
VCR device or another device (see “Re-Assigning
Device Keys”on page 15)

6. For future reference, write down the

working DVD Player/VCR combo code in
the below boxes:

DVD/VCR Code:

VCR Code:

(if used)

SEARCHING FOR YOUR CODE

If your device does not respond to the remote control
after trying all codes listed for your brand,or if your
brand is not listed at all,try searching for your code.
For example, to search for a code for your TV:

1. On the remote control,press

TV once.

2. Press and hold SET until the LED (red light)

blinks twice, then release

SET.

3. Enter 9 - 9 - 1.The LED will blink twice.

4. Aim the remote control at the the TV and

slowly alternate between pressing POWER
and TV. Stop when the TV turns off.

NOTE: In the search mode, the remote control
will send IR codes from its library to the selected
device, starting with the most popular code first.

5. To lock in the code, press and release SET.

The

LED will blink twice.

6. To search for the codes of your other

devices, repeat steps 1 through 5,but
substitute the appropriate device key for
the device you are searching for.

11

OFA 6 PVR 2/15/03 9:25 AM Page 11

CHECKING THE CODES

If you have set up the remote control using the
Searching For Your Code procedure (on the previous
page), you may need to find out which four-digit code
is operating your equipment.

For example, to find out which code is operating your TV:

1. On the remote control,press

TV once.

2. Press and hold SET until the LED (red light)

blinks twice, then release

SET.

3. Enter 9 - 9 - 0.The LED will blink twice.

4. To view the code for the first digit,press

1

once.Wait 3 seconds,count the LED
blinks (e.g., three blinks = 3) and write
down the number in the leftmost box in
the TV code boxes on page 10

NOTE: If a code digit is “0”,the LED will not
blink.

5. Repeat step 4 three more times for

remaining digits.Use

2 for the second

digit,

3 for the third digit,and 4 for the

fourth digit. Write down the code digits in
the remaining TV code boxes on page 10.

6. To check for codes of other devices,repeat

steps 1 through 5,but substitute the
appropriate device key for each device you
are checking. Write down the device’s code
digits in the appropriate code boxes on
page 10.

PROGRAMMING MASTER POWER

In its default state,the POWER key on the URC-6131
remote control will individually power your home
entertainment devices on or off. However,you can also
program a Master Power function onto the

POWER key

that will sequentially turn on or off all the devices with
a single key press.

Programming The Power Key For Master Power

1. Press and hold SET until the LED (red light)

blinks twice, then release

SET.

12

OFA 6 PVR 2/15/03 9:25 AM Page 12

2. Enter 9 - 9 - 5.The LED will blink twice.

Then press

POWER once.

3. For the first device you want in the power

on sequence,press its device key (e.g.,

CBL/SAT) once.

4. Repeat step 3 up to five more times to add

desired devices to the power-on sequence.

5. To save the settings and exit the program,

press and hold

SET until the LED blinks

twice, then release

SET.

Operating Master Power

1. After programming,point the remote

control at the devices and press

POWER

for at least 2 seconds to sequentially turn
on or off your devices.

NOTE: When POWER is pressed for less than
2 seconds, a power command will only be sent
to the currently-selected device. This allows you
to still individually power devices on or off.

2. You will see the devices turn on or off

according to your programmed sequence.

NOTE: The currently-selected device will always
turn on first, followed by the remaining
programmed sequence. After the master power
sequence has been completed, the remote control
will be set to control the first powered-on device.

NOTE: If one or more devices does not have a
POWER key, the power off/on sequence may be
slightly delayed when the remote control signals
the device(s). This action is normal.

Clearing Master Power

1. Press and hold SET until the LED (red light)

blinks twice, then release

SET.

2. Enter 9 - 9 - 5.The LED will blink twice.

Then press

POWER once.

3. Press and hold

SET until the LED blinks

twice, then release

SET. Master Power is

now cleared.

13

OFA 6 PVR 2/15/03 9:25 AM Page 13

USING KEYMOVER

The One For All 6-Device PVR Universal Remote
Control includes a Keymover feature that allows you to
map (or copy) keys from one mode (i.e., source mode)
to another mode (i.e., destination mode).

NOTE: The following keys cannot be used as a source or
destination: TV, PVR, DVD,CBL/SAT, AUD, VCR,and SET.

Programming Keymover

For example,if your VCR does not have volume control,
you can map those keys (i.e.,

VOL+, VOL-,and Mute)

from the TV mode to the VCR mode as follows:

1. Press and hold

SET until the LED (red light)

blinks twice, then release

SET.

2. Enter 9 - 9 - 4.The LED will blink twice.

3. For the source mode, press

TV once.

4. For the source key, press VOL+ once.

5. For the destination mode, press

VCR once.

6. For the destination key, press

VOL+ once.

7. The LED will blink twice indicating the

keymoved sequence is correct.

8. Repeat steps 1 through 7 twice more to

map remaining volume control keys,
substituting

VOL- and Mute as source and

destination keys in steps 4 and 6.

Upon completion of the above procedure, you can now
use your One For All 6-Device PVR Universal Remote
Control to control the TV’s volume and mute in the
VCR mode,as well as in the TV mode.

Restoring Keymoved Keys to Default Settings

Restoring A Single Keymoved Key

1. Press a device key that has a keymoved key.

2. Press and hold

SET until the LED (red light)

blinks twice, then release

SET.

3. Enter 9 - 9 - 4.The LED will blink twice.

4. Press the destination key twice (where the

keymoved key is stored). The

LED will

blink twice.

14

OFA 6 PVR 2/15/03 9:25 AM Page 14

Restoring All Keymoved Keys In A Single Mode

1. Press and hold

SET until the LED (red light)

blinks twice, then release

SET.

2. Enter 9 - 9 - 4.The LED will blink twice.

3. Press the destination mode twice (where

keymoved keys are stored).The

LED will

blink twice.

RE-ASSIGNING DEVICE KEYS

The One For All 6-Device PVR Universal Remote Control
can be set to control a second TV, PVR,VCR,DVD player,
or other device. For example,to control a TV, a cable box,
and two VCRs, you will need to re-assign the unused
DVD key to operate the second VCR as follows:

1. On the remote control,press and hold

SET

until the LED (red light) blinks twice,then
release

SET.

2. Enter 9 - 9 - 2.The LED will blink twice.

3. Press

VCR once, then press DVD once. The

LED will blink twice.

4. The DVD key is now ready to be

programmed for your second VCR. See
Programming Device Control on page 9.

To re-assign other device keys to the

DVD key, repeat

steps 1 through 4 with a sequence from the below chart:

NOTE:Only one device can be assigned to an unused device
key at a time.

To Re-Assign Device Perform Sequence

DVD as 2nd TV key: SET - 9 - 9 - 2 - TV - DVD

DVD

as 2nd CBL/SAT key: SET - 9 - 9 - 2 - CBL/SAT - DVD

DVD

as 2nd PVR key: SET - 9 - 9 - 2 - PVR - DVD

DVD

as 2nd AUD key: SET - 9 - 9 - 2 - AUD - DVD

You can also re-assign another unused device key by
substituting it for the

DVD key above and performing the

sequence.For example,to re-assign an unused

AUD key

as a second

VCR key, perf orm SET - 9 - 9 - 2 - VCR - AUD.

When a re-assignment is done, the

LED will blink twice

to confirm your choice.At that time, you will need to
program the remote control for the new device (see
Programming Device Control on page 9).

15

OFA 6 PVR 2/15/03 9:25 AM Page 15

CHANGING VOLUME LOCK

The One For All 6-Device PVR Universal Remote
Control is set at the factory for independent volume
control of each selected device.

However, you may change the Volume Lock setting to
Global Volume Lock so that a device’s volume will be
locked to one mode (e.g.,to control TV volume in all
other modes).After that,if desired,you can perform
Indiv idual Volume Unlock on a selected device to set its
volume control for independent operation.

Locking Volume Control To One Mode
(Global Volume Lock)

1. Press and hold SET until the LED (red light)

blinks twice, then release

SET.

2. Enter 9 - 9 - 3 and then press any

mode key once (e.g.,

TV). The LED will

blink twice.

3. Now, when you press

VOL+, VOL-,or Mute,

the volume of the selected device (e.g.,

TV)

will be controlled regardless of the mode
you have selected.

Unlocking Volume Control For A Single Device
(Individual Volume Unlock)

1. After performing Global Volume Lock (see

above), press a desired mode key where
you want volume to be unlocked (e.g.,

AUD) and controlled within its own mode.

2. Press and and hold SET until the LED (red

light) blinks twice, then release

SET.

3. Enter 9 - 9 - 3 and then press VOL- once.

The

LED will blink four times.

4. If desired,repeat steps 1 through 3

(of this section) for each device that you
want volume to be unlocked.

5. Now, after you select a device that has

volume unlocked (e.g.,

AUD), pressing

VOL+, VOL-,or Mute,will control the

device’s volume only in its own mode.

16

OFA 6 PVR 2/15/03 9:25 AM Page 16

Unlocking All Volume Control (Restoring
Default Setting)

NOTE: Performing these instructions will restore independent
volume control for all programmed devices (e.g., TV volume
control in TV mode, VCR volume in VCR mode, etc.).

1. On the remote control,press and hold SET

until the LED (red light) blinks twice,then
release

SET.

2. Enter 9 - 9 - 3 and then press VOL+ once.

The

LED will blink four times.

3. Volume will again be independently

controlled according to its default states
for all programmed devices.

MANUFACTURER’S CODES

Setup Codes For Audio Receivers

ADC 0531

Aiwa 1089, 1405, 0121,0158, 0189, 1388

Alco 1390

Anam 1609

Apex Digital 1257

Audiotronic 1189

Audiovox 1390

Bose 1229

Capetronic 0531

Carver 1089, 1189, 0189

Denon 1104, 1360

Harman/Kardon 0110, 0189

JBL 0110, 1306

JVC 0074

KLH 1390

Kenwood 1313,1027, 1570, 1569, 0027

Koss 1366

Linn 0189

MCS 0039

Magnavox 1089, 1189, 0189,0531

Marantz 1089, 1189, 0039,0189

Musicmagic 1089

Onkyo 0135, 0842, 1298

continued on next page...

17

OFA 6 PVR 2/15/03 9:25 AM Page 17

MANUFACTURER’S CODES

Setup Codes For Audio Receivers (continued)

Optimus 1023, 0531, 0670

Panasonic 1518, 0039, 0309

Philips 1089, 1189, 1269,0189

Pioneer 1023, 0014, 0150,0531, 0630, 1384

Polk Audio 0189

Proscan 1254

Quasar 0039

RCA 1023, 1254, 0531, 1390,1609

Samsung 1295

Sansui 1089, 0189

Sherwood 1653

Sony 1058, 1258, 1158, 0158,1558, 1658, 1758

Soundesign 0670

Stereophonics 1023

Sunfire 1313

Technics 1308, 1309, 1518, 0039,0309

Thorens 1189

Venturer 1390

Victor 0074

Wards 0014, 0158, 0189

Yamaha 0176, 1176

Setup Codes For Cable Boxes (Converters)

ABC 0003, 0008, 0014, 0017

Americast 0899

Bell & Howell 0014

Bell South 0899

Director 0476

General Instrument 0476, 0003,0276, 0810

GoldStar 0144

Hamlin 0009, 0273

Jerrold 0476, 0003, 0276,0014, 0810

Memorex 0000

Motorola 0476, 0276, 0810

Pace 0237

Panasonic 0000, 0107

Paragon 0000

Philips 0305, 0317

Pioneer 0877, 0144, 0533,1877

Pulsar 0000

Quasar 0000

Regal 0273, 0279

Runco 0000

Samsung 0144

18

OFA 6 PVR 2/15/03 9:25 AM Page 18

Scientific Atlanta 0877, 0008, 0017, 0477,1877

Sony 1006

Starcom 0003

Supercable 0276

Torx 0003

Toshiba 0000

Zenith 0000, 0525, 0899

Setup Codes For CD Players

Aiwa 0157

Burmester 0420

California Audio Labs 0029, 0303

Carver 0157, 0179, 0437

Classic 1297

DKK 0000

DMX Electronics 0157

Denon 0873, 0003

Fisher 0174, 0179

GPX 1296

Garrard 0393, 0420

Genexxa 0032

Harman/Kardon 0157, 0173

Hitachi 0032

JVC 0072, 1294

Kenwood 0681,0826, 0626, 0028, 0037, 0190

Koss 1317

Krell 0157

Linn 0157

MCS 0029

MTC 0420

Magnavox 0157

Marantz 0626, 0029, 0157,0180

Miro 0000

Mission 0157

NSM 0157

Nikko 0174

Onkyo 0868, 0101

Optimus 1063, 0000, 0032,0037, 0145, 0179, 0420,0437

Panasonic 0029, 0303

Parasound 0420

Philips 0626, 0157

Pioneer 1063, 1062, 0032

Polk Audio 0157

Proton 0157

QED 0157

Quasar 0029

continued on next page...

19

OFA 6 PVR 2/15/03 9:25 AM Page 19

MANUFACTURER’S CODES

Setup Codes For CD Players (continued)

RCA 1062, 0032, 0053, 0179

Realistic 0179, 0180, 0420

Rotel 0157,0420

SAE 0157

Sansui 0157

Sanyo 0179

Sharp 0861, 0037, 0180

Sherwood 1067, 0180

Sonic Frontiers 0157

Sony 0490, 0000, 0100, 0185

Soundesign 0145

TDK 1208

Tascam 0420

Teac 0174, 0180, 0393, 0420

Technics 0029, 0303

Victor 0072

Wards 0157, 0053

Yamaha 0888, 0036, 0187,1292

Yorx 0461

Setup Codes For DVD Players

Aiwa 0641

Apex Digital 0672, 0717,0755, 0794, 0796,0797,0830,1100

Audiologic 0736

B & K 0655, 0662

Blue Parade 0571

Broksonic 0695

DVD2000 0521

Daewoo 0784

Denon 0490, 0634

Emerson 0591

Enterprise 0591

Fisher 0670

GE 0522, 0717, 0815

GPX 0699, 0769

Go Video 0715, 0783

Gradiente 0651

Greenhill 0717

Harman/Kardon 0582, 0702

Hitachi 0573, 0664

Hiteker 0672

JBL 0702

JVC 0558, 0623, 0867

KLH 0717

20

OFA 6 PVR 2/15/03 9:25 AM Page 20

Kenwood 0490,0534, 0682

Konka 0711, 0719, 0720,0721

Koss 0651

Lasonic 0798

Magnavox 0503, 0675

Malata 0782

Marantz 0539

Microsoft 0522

Mintek 0717

Mitsubishi 0521

Nesa 0717

Next Base 0826

Onkyo 0503, 0627

Oritron 0651

Panasonic 0490,0632, 1362, 1462, 1490

Philips 0503, 0539, 0646,0854

Pioneer 0525, 0571, 0632

Polk Audio 0539

Princeton 0674

Proscan 0522

RCA 0522, 0571, 0717, 1022

Rotel 0623

Rowa 0823

Sampo 0698

Samsung 0573, 0820

Sansui 0695

Sanyo 0670

Sharp 0630

Sherwood 0633

Shinsonic 0533

Sony 0533

Sylvania 0675, 0821

Technics 0490

Techwood 0692

Theta Digital 0571

Toshiba 0503, 0695, 1045

Tredex 0799, 0800, 0803, 0804

Urban Concepts 0503

XBox 0522

Yamaha 0490, 0539, 0545,0817

Zenith 0503, 0591

Setup Codes For DVD Player/VCR Combos

Go Video 0715

Hitachi 0664 (for VCR use 0000)

JVC 0867

continued on next page...

21

OFA 6 PVR 2/15/03 9:25 AM Page 21

MANUFACTURER’S CODES

Setup Codes For DVD Player/VCR Combos
(continued)

Samsung 0820

Sansui 0695

Sharp 0630 (for VCR use 0848)

Sylvania 0675 (for VCR use 0000)

Toshiba 0503

Setup Codes For PVRs

Keen 0693

Panasonic 0616

Philips 0618

ReplayTV 0614, 0616

Sonic Blue 0614, 0616

Sony 0636

Tivo 0618, 0636

Setup Codes For PVR/Satellite Receiver Combos

Echostar 0775, 1005,1170

Expressvu 0775

Hughes 1142

Hyundai 1011

Philips 1142

Proscan 0392

RCA 0392, 1107

Sony 0639

Setup Codes For Satellite Receivers

AlphaStar 0772

Chaparral 0216

Crossdigital 1109

DishPro 1005, 0775

Echostar 1005, 0775,1170

Expressvu 0775

GE 0566

GOI 0775

General Instrument 0869

HTS 0775

Hitachi 0819

Hughes Network Systems 1142, 0749,1749

Hyundai 1011

JVC 0775

Magnavox 0724, 0722

22

OFA 6 PVR 2/15/03 9:25 AM Page 22

Memorex 0724

Mitsubishi 0749

Motorola 0869

Next Level 0869

Panasonic 0247, 0701

Paysat 0724

Philips 1142, 0749, 0724,1076, 0722, 1749

Proscan 0392

RCA 0392, 0566, 0855, 0143,1107

RadioShack 0869

SKY 0856

Samsung 1109

Sony 0639, 1639

Star Choice 0869

Toshiba 0749, 0790, 1749

Uniden 0724,0722

Zenith 0856, 1856

Setup Codes For TVs

A-Mark 0003

AOC 0030, 0019, 0003,0185

Abex 0032

Admiral 0093, 0463

Advent 0761

Adventura 0046

Aiko 0092

Aiwa 0701

Akai 0030

Alaron 0179

Ambassador 0177

America Action 0180

Anam 0180

Apex Digital 0748, 0765,0767

Archer 0003

Audiovox 0451, 0180, 0003, 0092, 0623

Baysonic 0180

Belcor 0019

Bell & Howell 0154, 0016

Bradford 0180

Brockwood 0019

Broksonic 0236, 0463, 0003

CXC 0180

Candle 0030, 0056, 0046,0186

Carnivale 0030

Carver 0054

Celebrity 0000

continued on next page...

23

OFA 6 PVR 2/15/03 9:25 AM Page 23

MANUFACTURER’S CODES

Setup Codes For TVs (continued)

Changhong 0765

Cineral 0451, 0092

Citizen 0060, 0030, 0056,0039, 0046, 0092, 0186, 0280

Clairtone 0185

Concerto 0056

Contec 0180, 0157, 0185

Craig 0180

Crosley 0054

Crown 0180, 0039

Curtis Mathes 0047,0054, 0154, 0451,0093,0060,0030, 0145,

0056, 0016, 0039,0166, 0702, 0747, 1147,1347

Daewoo 0451, 0019, 0039,0092, 0623

Daytron 0019

Denon 0145

Dumont 0017, 0019

Dwin 0774

Electroband 0000, 0185

Electrohome 0381

Emerson 0154, 0236, 0463, 0180,0282, 0178, 0019, 0179,

0039, 0038, 0177,0185, 0280, 0623

Envision 0030

Fisher 0154

Fujitsu 0179, 0683

Funai 0180,0179,0171

Futuretech 0180

GE 0047, 0051, 0451,0282, 0178, 0021, 0027,0747,

1147, 1347

Gibralter 0017, 0030, 0019

GoldStar 0030, 0178,0019, 0001, 0032

Gradiente 0053, 0056

Grunpy 0180, 0179

Haier 0768

Hallmark 0178

Harley Davidson 0179

Harman/Kardon 0054

Harvard 0180

Havermy 0093

Hitachi 0145, 0056,0016, 0032, 0038, 0151

Infinity 0054

Inteq 0017

JBL 0054

JCB 0000

JVC 0053

Janeil 0046

KEC 0180

24

OFA 6 PVR 2/15/03 9:25 AM Page 24

KTV 0180, 0030, 0039,0185, 0280

Kenwood 0030,0019

Kloss 0024, 0046

Konka 0628, 0632, 0638,0703, 0707

LG 0056

LXI 0047, 0054, 0154, 0156,0178, 0747

Logik 0016

Luxman 0056

MEI 0185

MGA 0150, 0030, 0178, 0019

MTC 0060, 0030, 0019,0056, 0185

Magnavox 0054, 0030, 0179,0024, 0186, 0187, 0386,1254,

1454

Majestic 0016

Marantz 0054, 0030

Matsushita 0250

Megatron 0178, 0145, 0003

Memorex 0154, 0250, 0463,0150, 0178, 0179, 0016

Mercury 0001

Midland 0047, 0017, 0051, 0039, 0032,0747

Minutz 0021

Mitsubishi 0093, 0150, 0178, 0019

Motorola 0093

Multitech 0180

NAD 0156, 0178, 0166

NEC 0030, 0019, 0056, 0497

NTC 0092

Nikko 0030, 0178, 0092

Noshi 0018

Onwa 0180

Optimus 0154, 0250, 0166

Optonica 0093, 0165

Orion 0236, 0463, 0179

Panasonic 0250, 0051

Penney 0047, 0156,0051, 0060, 0030, 0178,0021,0019,

0018, 0039, 0003,0027, 0032, 0747, 1347

Philco 0054, 0463,0030, 0145, 0019

Philips 0054, 1454

Pilot 0030, 0019, 0039

Pioneer 0038, 0166, 0679

Portland 0019, 0039, 0092

Princeton 0717

Prism 0051

Proscan 0047, 0747

Proton 0178, 0003

Pulsar 0017,0019

Quasar 0250, 0051, 0165

continued on next page...

25

OFA 6 PVR 2/15/03 9:25 AM Page 25

MANUFACTURER’S CODES

Setup Codes For TVs (continued)

RCA 0047, 0019, 0018, 0038,0090, 0679, 0747, 1047,

1147, 1247, 1347,1447, 1547

RadioShack 0047, 0154, 0165,0180, 0030, 0178, 0019, 0056,

0039, 0032, 0747

Realistic 0154, 0165, 0180,0030, 0178, 0019, 0056,0039,

0032

Rhapsody 0185

Runco 0017, 0030, 0497, 0603

SSS 0180, 0019

Sampo 0030, 0039,0032

Samsung 0060, 0030,0178, 0019, 0056, 0032, 0702,0766

Samsux 0039

Sansei 0451

Sansui 0463

Sanyo 0154

Scimitsu 0019

Scotch 0178

Scott 0236, 0180, 0178, 0019,0179

Sears 0047, 0054, 0154, 0156, 0178,0179, 0056, 0171,

0747

Semivox 0180

Semp 0156

Sharp 0093, 0165, 0039,0157, 0386, 0688, 0689

Shogun 0019

Signature 0016

Simpson 0186, 0187

Sony 0000, 0080, 0111, 1100

Soundesign 0180, 0178, 0179, 0186

Spectricon 0003

Squareview 0171

Starlite 0180

Supre-Macy 0046

Supreme 0000

Sylvania 0054, 0030, 0171,0381

Symphonic 0180, 0171

TMK 0178, 0056,0177

TNCi 0017

Tandy 0093

Tatung 0003

Technics 0250, 0051

Technol Ace 0179

Techwood 0051, 0056, 0003

Teknika 0054, 0180, 0150,0060,0019, 0179, 0056, 0016,

0039, 0092, 0186

Telefunken 0056, 0702

26

OFA 6 PVR 2/15/03 9:25 AM Page 26

Toshiba 0154, 0156, 0060, 1256

Tosonic 0185

Totevision 0039

Trical 0157

Universal 0027

Vector Research 0030

Victor 0053

Vidikron 0054

Vidtech 0178, 0019

Viking 0046

Wards 0054, 0165, 0030,0178, 0021, 0019, 0179, 0056,

0016, 0027, 0080,0111

Waycon 0156

White Westinghouse 0463, 0623

Yamaha 0030, 0019, 0769

Zenith 0017, 0463, 0016, 0092

Zonda 0003

Setup Codes For TV/DVD Player Combos

Broksonic 0695

Konka 0719, 0720

Panasonic 1362, 1462

Philips 0854

RCA 1022

Sharp 0630

Sylvania 0821

Toshiba 0695

Setup Codes For TV/VCR Combos

Broksonic 0002, 1479

Citizen 0278, 1278

Colt 0072

Curtis Mathes 1035

Daewoo 1278

Emerson 0002, 1278, 1479

Funai 0000

GE 1035, 0240, 0807,1060

GoldStar 1237

Harley Davidson 0000

Hitachi 0000

Lloyd’s 0000

Magnasonic 0278, 1278

Magnavox 0000, 1781

Magnin 0240

Memorex 0037, 0454, 1037,1162, 1237, 1262

continued on next page...

27

OFA 6 PVR 2/15/03 9:25 AM Page 27

MANUFACTURER’S CODES

Setup Codes For TV/VCR Combos (continued)

MGA 0240

Mitsubishi 0807

Optimus 0454, 1162, 1262

Orion 0002, 1479

Panasonic 1035, 1162, 1262

Penney 0240, 1035,1237

Quasar 1035, 1162

RadioShack 1037

RCA 0807, 0240, 1035, 1060

Sansui 0000, 1479

Sanyo 0240

Sears 0000, 1237

Sharp 0807

Sony 0000, 1232

Sylvania 1781

Symphonic 0000

Thomas 0000

Toshiba 0845

White Westinghouse 1278

Zenith 0000, 1479

Setup Codes For VCRs

Admiral 0048, 0209

Adventura 0000

Aiko 0278

Aiwa 0037, 0000

Akai 0041

America Action 0278

American High 0035

Asha 0240

Audiovox 0037, 0278

Beaumark 0240

Bell & Howell 0104

Broksonic 184, 0121, 0209, 0002,0479, 1479

CCE 0072, 0278

Calix 0037

Canon 0035

Carver 0081

Cineral 0278

Citizen 0037, 0278, 1278

Colt 0072

Craig 0037,0047, 0240, 0072

Curtis Mathes 0060,0035, 0162, 0041,0760,1035

Cybernex 0240

28

OFA 6 PVR 2/15/03 9:25 AM Page 28

Daewoo 0045, 0278, 1278

Denon 0042

Dynatech 0000

Electrohome 0037

Electrophonic 0037

Emerex 0032

Emerson 0037, 0184, 0000, 0121,0043, 0209, 0002, 0278,

0479, 1278, 1479

Fisher 0047, 0104

Fuji 0035, 0033

Funai 0000

GE 0060, 0035, 0240,0760, 0807, 1035, 1060

Garrard 0000

Go Video 0432

GoldStar 0037, 0038,1237

Gradiente 0000

HI-Q 0047

Harley Davidson 0000

Harman/Kardon 0081, 0038

Harwood 0072

Hitachi 0000, 0042,0041

Hughes Network Systems 0042

JVC 0067, 0041

Jensen 0041

KEC 0037,0278

KLH 0072

Keen 0693

Kenwood 0067,0041, 0038

Kodak 0035, 0037

LXI 0037

Lloyd’s 0000

Logik 0072

MEI 0035

MGA 0240, 0043

MGN Technology 0240

MTC 0240, 0000

Magnasonic 1278

Magnavox 0035, 0039, 0081,0000, 0563, 1781

Magnin 0240

Marantz 0035, 0081

Marta 0037

Matsushita 0035, 0162, 0454

Memorex 0035, 0162, 0037,0048, 0039, 0047, 0240,0000,

0104, 0209, 0454,0479, 1037, 1162, 1237,1262

Minolta 0042

Mitsubishi 0067, 0043, 0807

Motorola 0035, 0048

continued on next page...

29

OFA 6 PVR 2/15/03 9:25 AM Page 29

MANUFACTURER’S CODES

Setup Codes For VCRs (continued)

Multitech 0000, 0072

NEC 0104, 0067, 0041, 0038

Nikko 0037

Noblex 0240

Olympus 0035

Optimus 1062, 0162, 0037,0048, 0104, 0432, 0454,1048,

1162, 1262

Orion 0184, 0209,0002, 0479, 1479

Panasonic 1062, 0035,0162,0225, 0454, 0616, 1035, 1162,

1262

Penney 0035, 0037,0240, 0042, 0038, 1035,1237

Pentax 0042

Philco 0035, 0209,0479

Philips 0035, 0081, 0618,0749, 1081, 1181

Pilot 0037

Pioneer 0067

Polk Audio 0081

Profitronic 0240

Proscan 0060, 0760, 1060

Protec 0072

Pulsar 0039

Quasar 0035, 0162, 0454, 1035,1162

RCA 0060, 0240, 0042, 0760,0807, 1035, 1060

RadioShack 0000, 1037

Radix 0037

Randex 0037

Realistic 0035, 0037, 0048,0047, 0000, 0104

ReplayTV 0614, 0616

Runco 0039

STS 0042

Samsung 0240, 0045

Sanky 0048, 0039

Sansui 0000, 0067, 0209,0041, 0479, 1479

Sanyo 0047, 0240, 0104

Scott 0184, 0045, 0121, 0043

Sears 0035, 0037, 0047, 0000, 0042,0104, 1237

Semp 0045

Sharp 0048, 0807, 0848

Shintom 0072

Shogun 0240

Singer 0072

Sonic Blue 0614, 0616

Sony 0035, 0032, 0000, 0033,0636, 1032, 1232

Sylvania 0035, 0081, 0000,0043,1781

Symphonic 0000

30

OFA 6 PVR 2/15/03 9:25 AM Page 30

TMK 0240

Tatung 0041

Teac 0000, 0041

Technics 0035, 0162

Teknika 0035, 0037, 0000

Thomas 0000

Tivo 0618, 0636

Toshiba 0045, 0043, 0845

Totevision 0037, 0240

Unitech 0240

Vector 0045

Vector Research 0038

Video Concepts 0045

Videomagic 0037

Videosonic 0240

Villain 0000

Wards 0060, 0035, 0048,0047, 0081, 0240, 0000, 0042,

0072, 0760

White Westinghouse 0209, 0072, 1278

XR-1000 0035, 0000,0072

Yamaha 0038

Zenith 0039, 0000, 0209, 0033,0479, 1479

TROUBLESHOOTING

PROBLEM: LED (red light) does not blink when you

press a key.

SOLUTION: Replace batteries with two new AA

alkaline batteries.

PROBLEM:

LED blinks when you press a key,but

home entertainment device does not
respond.

SOLUTION: Make sure the remote control is aimed at

your home entertainment device and is
not farther than 15 feet away.

PROBLEM: The unit does not control home enter-

tainment devices or commands are not
working properly.

SOLUTION: Try all listed codes for the device brands

being set up.Make sure they can be
operated with an infrared remote control.

continued on next page...

31

OFA 6 PVR 2/15/03 9:25 AM Page 31

TROUBLESHOOTING (continued)

PROBLEM: DVD/VCR Combo does not respond

properly.

SOLUTION: Use the VCR codes for your brand.Some

combo units may require both a DVD
code and a VCR code for full operation.

PROBLEM: Changing channels does not work

properly.

SOLUTION: If the original remote control required

pressing ENTER to change channels,
then press

ENTER on the remote control

after entering the channel number.

PROBLEM: Tried Search For Your Code method and

still could not find a working code.

SOLUTION: Clear the device key as follows: Press and

hold

SET until the LED (red light) blinks

twice, then release. Next enter

9 - 9 - 2.

Then press the device key to be cleared
twice. Now repeat the Search For Your
Code method on page 11.

PROBLEM: Remote control does not turn on Sony or

Sharp TV/VCR Combo.

SOLUTION: For power on,these products require

programming TV codes.For Sony, use
TV code 0000 and VCR code 0032. For
Sharp,use TV code 0093 and VCR code

0048.

PROBLEM:

CH+ and CH- do not work for your

RCA TV.

SOLUTION: Due to RCA design (1983-1987), only the

original remote control will operate these
functions.

PROBLEM: No remote control of volume.

SOLUTION: See Changing Volume Lock on page 16 to

lock/unlock volume.

32

OFA 6 PVR 2/15/03 9:25 AM Page 32

ABOUT UPGRADING

The One For All 6-Device PVR Universal Remote
Control has the largest infrared code library available.
However, if you purchase a brand new home entertain­ment device,it may not respond to the codes stored in
the remote control’s memory.

If this happens,please contact our Customer Support
department (see Customer Support on the next page)
to upgrade the remote control. The Customer Support
representative will search our entire database for a code
that matches your device and instruct you how to enter
it into your One For All 6-Device PVR Universal
Remote Control.

If the code for your home entertainment or home
automation device is not in our database,we will need
to “capture” the code for that device from its original
remote control. A new code would then be created and
need to be entered into your One For All 6-Device PVR
Universal Remote Control. If necessary, the Customer
Support representative can instruct you how to begin
the capture procedure.

NOTE: One For All reserves the right to replace a returned
remote control with a new one of equal or superior functionality.

Upgrade Exclusions

• Home entertainment devices controlled by radio
frequency (RF/UHF), wired, or ultrasonic remote
controls. Only devices controlled by infrared remote
controls are covered.

• Home entertainment devices not controlled by
remote controls.

• Broken or defective product.

• Products that operate over 100 kHz.

• Infrared keyboards and infrared pointing devices
(such as mouse substitutes).

• All products for sale and/or use outside the continental
United States,Hawaii,Alaska,or Canada.

33

OFA 6 PVR 2/15/03 9:25 AM Page 33

CUSTOMER SUPPORT

For assistance,please contact us in any of the
following ways:

• E-mail: [e-mail]

• Internet: http://www.oneforall.com

• Consumer Help Line:[phone]

INSTRUCTIONS TO THE USER

This equipment has been tested and found to comply
with the limits for a class B digital device,pursuant to
part 15 of the FCC Rules. These limits are designed to
provide a reasonable protection against harmful inter­ference in a residential installation.This equipment
generates,uses,and can radiated radio frequency
energy and if not installed and used in accordance
with the instructions,may cause harmful interference
to radio communications.

However, there is no guarantee that interference will
not occur in a particular installation.If this equipment
does cause harmful interference to radio or television
reception,which can be determined by turning the
equipment off and on,the user is encouraged to try
to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment
and receiver.

• Connect the equipment into an outlet or a circuit
different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV
technician for help

34

OFA 6 PVR 2/15/03 9:25 AM Page 34

LIMITED WARRANTY

One For All (“OFA”) warrants, to the original purchaser
only, that this product will be free from defects in
materials and workmanship, under normal use, for
ninety (90) days from the date of original purchase.
This warranty does not cover damage or failures
caused by products or services not supplied by OFA,
or which result from accident,misuse,abuse,neglect,
mishandling, misapplication,faulty installation,
set-up adjustment,improper maintenance,alteration,
maladjustment of consumer controls,modifications,
commercial use,or that is attributable to acts of God.

There are no express warranties except as listed above.
OFA SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT OR ARISING OUT OF
ANY BREACH OF WARRANTY.ALL EXPRESS AND
IMPLIED WARRANTIES, INCLUDING THE WAR­RANTIES OF MERCHANT-ABILITY AND FITNESS
FOR A PARTICULAR PURPOSE,ARE LIMITED TO
THE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion or limitation of
incidental or consequential damages,or limitations on
how long an implied warranty lasts, so the above
exclusions or limitations may not apply to you.This
warranty gives you specific legal rights and you may
also have other rights which vary from state to state.

To obtain warranty service for a defective product
during the warranty period,please return the product,
preferably in the original carton,along with your
purchase receipt,to the store of original purchase.
A note detailing the complaint would be helpful.The
store,at its option,will replace or repair this product if
found to be defective.

One For All: [phone]

URC-6131 Feb.2003

35

OFA 6 PVR 2/15/03 9:25 AM Page 35

ADDITIONAL INFORMATION

As you update your home entertainment system,One
For All® has a universal remote control that will fit your
needs. Look for these exciting products at a retailer
near you.

One For All Access 3 . . . . . . . . . . . . . . . . . . . . . URC-3605

One For All Big Easy 3-Device. . . . . . . . . . . . . URC-3300

One For All Video Expert 4-Device . . . . . . . . . URC-4041

One For All Big Easy 4-Device. . . . . . . . . . . . . URC-4330

One For All Access 4 . . . . . . . . . . . . . . . . . . . . . URC-4605

One For All Access 5 . . . . . . . . . . . . . . . . . . . . . URC-5705

One For All PVR 6-Device . . . . . . . . . . . . . . . . URC-6131

One For All 6-Device Home Theater. . . . . . . . URC-6011

One For All 8-Device Home Theater. . . . . . . . URC-8011

One For All 8L-Device Home Theater

With Learning. . . . . . . . . . . . . . . . . . . . . . . . . . URC-8811

One For All A/V LCD 8 Device

With Learning. . . . . . . . . . . . . . . . . . . . . . . . . . URC-8910

One For All IR/RF LCD 8 Device

With Learning. . . . . . . . . . . . . . . . . . . . . . . . . . URC-9910

One For All 8 Device Home Theater Remote

Powered By Kameleon . . . . . . . . . . . . . . . . . . . URC-9960

ONE FOR ALL® is the registered trademark of
Universal Electronics Inc.Computime International
Ltd. is the Licensee of the ONE FOR ALL® brand for
USA and Canada.

Copyright 2003 by Universal Electronics Inc.No part
of this publication may be reproduced,transmitted,
transcribed, stored in any retrieval system, or translated
to any language,in any form or by any means,electronic,
mechanical, magnetic, optical,manual,or otherwise,
without the prior written permission of Universal
Electronics Inc.

The One For All® 6-Device PVR Universal Remote
Control is compatible for use in North America,
excluding Mexico.

OFA 6 PVR 2/15/03 9:25 AM Page 36