Arm Chair
IMPORTANT NOTE
This product is made from sturdy, high quality aluminum
and will provide years of enjoyment. Do not use power tools
to assemble and only tighten bolts until they are snug.
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
Part List
B.
Seat
1 pc.
Hardware List
A.
Back Panel
1 pc.
E.
Stretcher
1 pc.
C.
Arm
1 pc.
D.
Arm
1 pc.
F.
Cushion
1 pc.
Key Wrench
1 pc.
Tools required for assembly : Phillips Slottedscrewdriver and screwdriver
Bolt
4 pcs. (+1 extra)
Flat Washer
4 pcs. (+1 extra)
Nut
4 pcs. (+1 extra)
Nut Cap
4 pcs. (+1 extra)
Short Bolt
2 pcs. (+1 extra)
Head Cap Bolt
4 pcs. (+1 extra)
Assembly Instructions 2/2
IMPORTANT
* Please keep Key Wrench in a safe place as you may need to tighten up the Nuts in the future.
* Use a soft cloth between these parts and the floor.
* Do not use power tools to assembly and do not tightening the bolts and nuts.
* Do not tighten up all the bolts and nuts until each part is properly assembled.
Short Bolt
Bolt
Flat Washer
Nut
Cap Nut
C
B
A
D
STEP 1
Attach Arm (C) and Seat (B) to
Back Panel (A) with Short Bolt, Bolts,
Flat Washers, Nuts and Cap Nuts.
Attach Arm (D) to unit with
Short Bolt, Bolts, Flat Washers,
Nuts and Cap Nuts.
STEP 2
Attach Stretcher (E) to unit with Bolts.
Place Cushion (F) onto seat.
Use the tie-downs on Cushion (F)
to attach to chair.
F
E
Head Cap Bolt
Loading...