ONEAC S07KXAU, S1K0XAU, S2K5XAU, S2K0XAU, S3K0XAU Operating Manual

ONEAC Sinergy® S II Series

Uninterruptible Power Supply

Operating Manual

• S07KXAU

• S1K0XAU

• S2K5XAU

• SBP1K5-2

• SBP3K0-2

• S2K0XAU

• S3K0XAU

• S2K0XHU

• S3K0XHU

Sinergy

®

S II Series User Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS.

Please read and save these instructions. This manual contains important instructions for ONEAC models:

• S0K7XAU

• S1K0XAU

• S2K5XAU

• SBP1K5-2

• SBP3K0-2

Follow these instructions during installation and maintenance of the UPS and batteries.

• S2K0XAU

• S3K0XAU

• S2K0XHU

• S3K0XHU

If you have a problem with the UPS, please refer to this manual before calling the Technical Support
Department. The Troubleshooting section on page 29 addresses most UPS-related issues.

Licenses and Trademarks

ONEAC, Sinergy , MananageUPS and MopUPS are all re gistered trademarks of ONEAC Corporation. All
other trademarks, product and corporate names are the property of their respective owners.

ONEAC USA
27944 North Bradley Road
Libertyville, IL 60048-9700
USA
Telephone: [phone]
Toll Free: [phone]
Facsimile: [phone]

913-602 @ Rev. A

ONEAC EUROPE
George Curl Way
Southampton, Hampshire SO18 2RY
United Kingdom
Telephone: [phone]
Facsimile: [phone]

7/06

Sinergy® S II Series User Instruction Manual ......................................................................................................................i

Introduction .....................................................................................................................................................................1

Registering Your ONEAC UPS ...........................................................................................................................................1

Technical Support .............................................................................................................................................................1

FCC Compliance ..............................................................................................................................................................1

Safety Compliance ...........................................................................................................................................................1

About This Manual ....................................................................................................................................................1

Symbols ..................................................................................................................................................................... 2

Safety ............................................................................................................................................................................... 3

Intended Use .............................................................................................................................................................3

General Warnings ......................................................................................................................................................3

Safety Notices ............................................................................................................................................................3

Battery Safety ............................................................................................................................................................4

Repacking of Unit ......................................................................................................................................................4

Setup ...............................................................................................................................................................................5

Delivery ...................................................................................................................................................................... 5

Unpacking .................................................................................................................................................................5

Storage ...................................................................................................................................................................... 6

Environmental Conditions ..........................................................................................................................................6

Floor Loading .............................................................................................................................................................6

Ventilation ................................................................................................................................................................. 6

Installation .......................................................................................................................................................................6

Rack-Mounting the UPS or External Battery Cabinets .................................................................................................7

Tower (Floor) Mounting and External Battery Cabinets ...............................................................................................8

Electrical preparations ................................................................................................................................................9

Connections ..............................................................................................................................................................9

Theory of Operation .......................................................................................................................................................10

UPS Mode ................................................................................................................................................................10

Battery Mode ...........................................................................................................................................................10

Bypass Mode ...........................................................................................................................................................11

Front Panel Display and Control ...............................................................................................................................11

System Indicators .....................................................................................................................................................12

Rear Panel ................................................................................................................................................................13

UPS Start-up & Shutdown ..............................................................................................................................................15

Normal UPS Start-up Procedure ................................................................................................................................15

Manual Bypass Procedure ........................................................................................................................................15

UPS Shutdown Procedure ........................................................................................................................................15

Remote Power Off (RPO) ..........................................................................................................................................15

Maintenance ..................................................................................................................................................................16

UPS Storage .............................................................................................................................................................16

Battery Testing .........................................................................................................................................................16

Replacing Batteries ...................................................................................................................................................16

Battery Disposal .......................................................................................................................................................18

Interfaces .......................................................................................................................................................................18

Serial interface COM 3 .............................................................................................................................................18

Interface Slot COM ..................................................................................................................................................18

Communications ...................................................................................................................................................... 18

Optional Isolated Contacts Card ...............................................................................................................................19

Troubleshooting .............................................................................................................................................................21

Warranty ........................................................................................................................................................................ 22

Batteries ..................................................................................................................................................................22

Limitations of Warranty ............................................................................................................................................22

Exclusive Remedies ...................................................................................................................................................22

Return Procedure .....................................................................................................................................................22

Appendix A: Features and Specifications .........................................................................................................................23

Sinergy S II Series Series UPS User Instruction Manual i

Physical and Electrical Specifications ........................................................................................................................ 24

Specifications .......................................................................................................................................................... 25

ii Sinergy S II Series User Instruction Manual

Introduction

Introduction

Registering Y our
ONEAC UPS

Technical Support

FCC Compliance

Thank you for selecting this uninterruptible power supply (UPS). ONEAC’s Sinergy S II Series UPS
offers the most reliable protection from the harmful effects of electrical line disturbances for your
computing and communications equipment. ONEAC’ s ISO 9001 certification represents our commitment
to building world-class products. We take pride in every unit that leaves our manufacturing facility.

To ensure that your Sinergy S II Series UPS model and serial number are registered, complete and mail
the enclosed postage-paid warranty card or go on line at www.oneac.com.

ONEAC offers 24-hour technical support. To contact ONEAC Technical Services:

• North America: [phone], option 3
or toll free [phone], option 3.

• Europe: [phone]

• email: [e-mail].

Please check with ONEAC Technical Services before attempting to repair or return an y ONEA C product.
If an ONEAC UPS needs repair or replacement, ONEAC Technical Services will issue a Return Material
Authorization (RMA) number along with instructions on how to return the UPS.

ATTENTION: Changes or modifications to this unit not expressly approved by the party responsible or

in FCC compliance could void the user’s authority to operate the equipment.

The 2-3 kVA models ha ve been tested and comply with the limits for a Class A digital de vice, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the UPS is operating in a commercial environment. The UPS generates, uses, and can
radiate radio frequency energy. If installation and use is not in accordance with the instruction manual, it
may cause harmful interference to radio communications.

Safety Compliance

About This Manual

ATTENTION: Operation of this equipment in a residential area may cause harmful radio

communications interference. The user is responsible for correcting the interference.

The 700 VA to 1500 VA models have been tested and comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the UPS is operating in a residential environment. The UPS generates, uses,
and can radiate radio frequency energy. If installation and use is not in accordance with the instruction
manual, it may cause harmful interference to radio communications.

UL/cUL listing to UL1778
TUV compliance to EN62040-1
CE

This manual contains information regarding the installation, operation and use of the Uninterruptible
Power Supply (UPS).

Consult this manual before installation of the equipment, which should be performed only by qualified
personnel. This User’s Manual should be kept for later reference for operation and maintenance of the
UPS.

These instructions may be supplemented with additional sheets, describing specific extensions or options.

Sinergy S II Series Series UPS User Instruction Manual 1

Symbols

The following symbols are used in this manual:

ATTENTION: Indicates instructions, which if not observed, may endanger reliability of your UPS or the

security of your data.

WARNING: Indicates instructions, which if not observed, present risk of electric shock, may endanger

your life, your health, reliability of your UPS or the security of your data.

2

Sinergy S II Series Series UPS User Instruction Manual

Safety

Safety

Intended Use

General Warnings

Safety Notices

• This device serves as an uninterruptible power supply for connected loads. The device is in
compliance with all relevant safety regulations concerning information technology equipment, for
use in an office environment.

• Depending on the type and rating of UPS device, certain configurations of battery extensions may
be connected. These battery extensions may only be connected to the compatible basic UPS unit.

WARNING: We consider the safety of personnel to be of paramount importance. For this reason it is

essential that procedur es r elating to safety in this manual be car efully re viewed befor e commencing work,
and properly adhered to thereafter. The User or Operator may intervene in the operation of the UPS
provided that the instructions laid out in the section titled “Installation” on page 6 are strictly followed.

W ARNING: Even when all switches and/or circuit breakers are open, dangerous v oltages are present
within this unit!

may carry out any operation that requir es protection panels to be opened and/or r emoved. Any repairs or
modifications by the user may result in out-of-warranty repair charges, unsafe electrical conditions, or
violation of electrical codes.

WARNING: Read the following safety notices carefully! Disregard of these safety notes may endanger

your life, your health, and the reliability of your device and the security of your data.

• Transport the unit only in suitable packaging (protected against jolts and shocks).

• If the equipment is moved from a cold environment to a warmer operating location, condensation
may occur. Before you switch on the equipment it must be absolutely dry. An acclimatization period
of at least two hours is required.

• The equipment must be installed in accordance with the environmental conditions specified in
“Environmental Conditions” and in Table 2.

• Even with all buttons in “OFF” position the de vice (UPS) is not isolated from the mains. T o isolate
completely from the mains, the power cord must be disconnected.

• This equipment services power from more than one source. The output terminals and/or receptacles
may have voltage present even when the unit is unplugged. UPS’s present a different safety issue
than most electrical equipment because unplugging the UPS puts it into backup mode. Unplugging
the UPS does not remove the electrical charge.

• In case of interruption of the mains voltage, the integrated battery maintains the po wer supply to the
user’s equipment.

• The power supply cord is intended to serve as the disconnection device. The outlet-socket must be
near the equipment and must be easily accessible.

• This UPS must be connected to an earthed mains outlet-socket.

• Place all cords so that nobody can stand on them or trip over them. When connecting the device to
the power supply, follow the instructions in the section titled “Installation”.

• Make sure that no objects (e.g. pins, necklaces, paper clips, etc.) get inside the device.

• In emergencies (e.g. damaged case, controls or power cables, penetration of liquids or foreign
matter) switch off the device and contact Technical Support for assistance.

• Do not connect equipment that will overload the UPS or demand DC-current.

• When cleaning the unit, follow the instructions in the section titled “Maintenance”.

• Data transmission lines should not be connected or disconnected during a thunderstorm.

• Remote Power Off (RPO) is located on the rear of the unit (see Figure 11 and Figure 12). When this
connection is open, the logic circuit will immediately shut down the UPS output.

• When installing units in racks do not allow racks to become “top hea vy .” Install heaviest equipment
(typically the UPS and batteries) near bottom of rack, and install this equipment before installing
equipment higher in the rack.

There ar e no user -serviceable parts inside . Only factory authorized tec hnical personnel

Sinergy S II Series Series UPS User Instruction Manual 3

Safety

Battery Safety

Repacking of Unit

WARNING: The batteries installed in the UPS and within the battery extensions contain electrolyte.

Under normal conditions the containers are dry. A damaged battery may leak electrolyte that can be
dangerous in contact with the skin and cause irritation to the eyes. Should this happen wash the affected
part with copious amounts of water and seek immediate medical advice.

• Voltage is always present on the battery terminals.

• Even when discharged, a battery has the capacity to supply a high short circuit current, which, in
addition to causing damage to the battery itself and to associated cables, may expose the operator to
the risk of burns.

• Batteries should not be kept in storage for periods exceeding 6 months at 25°C without being
recharged (having been charged to 100% at the beginning of any such period). If these conditions
are not respected the performance of the battery can no longer be guaranteed. It is advisable to
recharge the batteries at least once every 4 months.

• Since new batteries often do not provide full capacity after an initial charge it may be necessary to
carry out a number of discharge/recharge cycles before optimum performance is achieved.

• In order to protect the environment, batteries must be disposed of in accordance with the re gulations
governing disposal/recycling of toxic and harmful waste.

Do not pack the equipment until at least two (2) hours have elapsed since the last recharge.
Place the equipment in bags made of a material sufficiently porous to allow it to breathe (e.g. 100µm

polyethylene).
Do not remove air from the packaging.
When packing unit for movement by common carrier , place in original, or equiv alent packaging container .

4

Sinergy S II Series Series UPS User Instruction Manual

Setup

Setup

Delivery

Unpacking

The equipment has been thoroughly checked before shipment. Upon receipt, check the packaging and
ensure that the contents are undamaged. Any damage must be reported to the shipper and any missing
parts must be reported to the supplier immediately.

Care should be taken when removing the packaging in order to av oid damaging the equipment. Check all
packaging materials to ensure that no items are discarded. Remove the packaging follo wing the sequence
illustrated in Figures 1.

WARNING: This unit is heavy and requires two persons for safe lifting

Tools Required

• Scissors or Knife

• Screwdriver

Fig. 1: Unpacking the UPS

This UPS includes:

• (1) UPS

• (1) USB Cable

• Mounting Hardware

• Tower Stands

• MopUPS Professional

• Manual
Additional items:
For high voltage models (models with XHU in the part number) also include:

• Cord Retention Bracket

• (2) IEC320 to IEC Extension Cords

• (1) IEC/NEMA Input Power Cord

Sinergy S II Series Series UPS User Instruction Manual 5