How it Works
Oncam
Loading...
EVO-05NMD
Quick Start Manual
2 pgs966.31 Kb0
User Manual
62 pgs2.84 Mb0

Oncam EVO-05NID, EVO-05NJD, EVO-05NCD, EVO-05NMD, EVO-05NND User Manual

Download
1
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Installer Guide and User Manual
for the
Evolution Camera Range
Oncam Grandeye
This document contains proprietary data or information pertaining to items, or components, or processes, or other matter developed or acquired at the private expense of the Oncam Grandeye and is restricted to use only by persons authorized by Oncam Grandeye in writing to use it. Disclosure to unauthorized persons would likely cause substantial competitive harm to Oncam Grandeye business position. Neither said document nor said technical data or information will be furnished or disclosed to or copied or used by persons outside Oncam Grandeye without the express written approval of Oncam Grandeye
2
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Manual Copyright
© Oncam Global Group AG, March 2013. All rights reserved.
No part of this manual may be reproduced except for your express personal use. At any time and without any obligation to provide notice, Oncam Grandeye and its affiliates reserve the right to revise, alter or amend this publication in its entirety or any portion hereof. Although Oncam Grandeye and its affiliates do their best to provide current and accurate information in this manual, Oncam Grandeye and its affiliates make no guarantee, representation or warranty, either express or implied, regarding the accuracy of the information contained in this manual. Oncam Grandeye and its affiliates assume no responsibility and any potential liability for any errors that may appear in this manual.
At any time, Oncam Grandeye and its affiliates further reserve the right to alter, amend or revise any product specifications without any obligation to provide notice of such changes.
Trademarks and Third‐Party Copyrights
Oncam Grandeye and the Oncam Grandeye "security circle" logo are registered trademarks of Oncam Global Group AG. Oncam Grandeye and the IPZoom logos are trademarks of Oncam Global Group AG (and its affiliates); SATIV is a service mark of Oncam Global Group (and its affiliates).
The names of other actual companies, organizations, products or services mentioned in this manual may be the trademarks of their respective owners.
3
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plugs. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
9. Protect all power cords from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
10. Only use attachments / accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
12. Unplug this apparatus during lighting storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
4
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Contents
1 Oncam Grandeye 360° IP Camera Basics ........................................................................................................ 7
1.1 Fisheye View .............................................................................................................................................. 7
2 The Evolution Camera Range ........................................................................................................................... 7
2.1 IP camera Module ...................................................................................................................................... 7
2.1.1 Evolution - Outdoor Dome Camera (for external and internal use) ...................................................... 8
2.1.2 Evolution - Indoor Camera (internal use only) ..................................................................................... 8
2.1.3 Evolution - Indoor Concealed Camera (internal use only) .................................................................... 8
3 Planning Your Deployment ............................................................................................................................... 9
3.1 Ceiling Mount ............................................................................................................................................. 9
3.2 Wall Mount................................................................................................................................................. 9
3.3 Some Examples ......................................................................................................................................... 9
3.4 Zones of Coverage................................................................................................................................... 10
3.4.1 Facial Recognition ........................................................................................................................... 10
3.4.2 Facial Identification .......................................................................................................................... 10
3.4.3 Object Recognition .......................................................................................................................... 11
3.4.4 Situational Awareness / Movement Detection .................................................................................. 11
3.5 Overhead Viewing Angle .......................................................................................................................... 11
3.6 Positioning Multiple Cameras ................................................................................................................... 12
3.6.1 Indoor Placements .......................................................................................................................... 12
3.6.2 Outdoor Placements ....................................................................................................................... 12
3.7 Lighting Recommendations ...................................................................................................................... 12
3.7.1 Lighting tips .................................................................................................................................... 12
3.7.2 Summary ........................................................................................................................................ 13
4 Installation Steps ............................................................................................................................................ 14
4.1 Evolution Indoor Camera .......................................................................................................................... 14
4.1.1 Supplied Parts ................................................................................................................................. 14
4.1.2 Description ...................................................................................................................................... 14
4.1.3 Installation Steps ............................................................................................................................. 14
4.1.4 Pendant Mounting ........................................................................................................................... 15
4.1.5 Wall (Vertical Surface) Mounting ....................................................................................................... 15
4.2 Evolution Indoor Concealed Camera ........................................................................................................ 16
4.2.1 Supplied Parts ................................................................................................................................. 16
4.2.2 Description ...................................................................................................................................... 16
4.2.3 Installation Steps ............................................................................................................................. 16
4.3 Evolution Outdoor Dome Camera ............................................................................................................. 17
4.3.1 Supplied Parts ................................................................................................................................. 17
5
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
4.3.2 Description ...................................................................................................................................... 17
4.3.3 Installation Steps ............................................................................................................................. 18
4.3.4 Pendant Mounting ........................................................................................................................... 19
4.3.5 Wall (Vertical Surface) Mounting ....................................................................................................... 19
4.3.6 Pole or Corner Mounting ................................................................................................................. 19
4.3.7 Sun Shield ....................................................................................................................................... 20
5 Corner, Wall and Pole Mount Brackets ........................................................................................................... 20
5.1 Evolution Wall Mount Kit - OBE-04-O#A ................................................................................................... 20
5.2 Evolution Corner Wall Mount Adapter OBE-05-O#A ................................................................................ 21
5.3 Evolution Pole Mount Adapter OBE-03-O#A ........................................................................................... 21
5.4 Installation ................................................................................................................................................ 22
5.4.1 Wall Mount ...................................................................................................................................... 22
5.4.2 Installation on Rough Surfaces or Over Electrical Boxes ................................................................... 22
5.4.3 Pendant Adapter – Evolution Outdoor Housing ................................................................................ 22
5.4.4 Pendant Adapter – Evolution Indoor Housing ................................................................................... 22
5.4.5 Corner Mount Applications .............................................................................................................. 23
5.4.6 Pole Mount Applications .................................................................................................................. 23
6 Audio Input..................................................................................................................................................... 24
7 Power Requirements ...................................................................................................................................... 24
8 Preparing the Camera for Installation .............................................................................................................. 25
8.1 Cabling the Camera for Ethernet and Power ............................................................................................. 25
8.2 Cabling the Camera for External I/O ......................................................................................................... 25
8.3 Alarms OUT ............................................................................................................................................. 26
8.4 Alarms IN ................................................................................................................................................. 26
8.5 Camera Test ............................................................................................................................................ 26
9 Dome Handling and Cleaning ......................................................................................................................... 28
10 First Time Operation ................................................................................................................................. 29
10.1 DHCP‐Based Installation ..................................................................................................................... 29
10.2 Static IP Installation ............................................................................................................................. 29
10.3 Finding Available Cameras ................................................................................................................... 30
10.4 Connecting to the Camera ................................................................................................................... 30
11 Camera Web Interface ............................................................................................................................. 31
11.1 Control Panel tab ................................................................................................................................. 31
11.2 Image tab ............................................................................................................................................ 33
11.2.1 Sharpen setting ............................................................................................................................... 33
11.2.2 EV Compensation setting ................................................................................................................ 33
11.2.3 Wide Dynamic Range setting ........................................................................................................... 33
11.2.4 Image Time/date overlay ................................................................................................................. 34
11.2.5 Camera Mount setting ..................................................................................................................... 34
11.3 Admin tab ............................................................................................................................................ 35
6
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
11.3.1 Network Settings ............................................................................................................................. 35
11.3.2 User Management Settings ............................................................................................................. 36
11.3.3 Alarm settings ................................................................................................................................. 36
11.3.4 Camera Settings ............................................................................................................................. 39
11.3.5 Clock settings ................................................................................................................................. 40
11.3.6 Stream Settings – Multi stream feature enable ................................................................................. 40
11.3.7 Audio settings ................................................................................................................................. 42
11.3.8 Factory Defaults .............................................................................................................................. 43
11.4 Privacy tab .......................................................................................................................................... 45
11.5 Motion Detection tab ........................................................................................................................... 46
12 Connecting directly to the Camera streams .............................................................................................. 47
12.1 JPEG snapshot image ......................................................................................................................... 47
12.2 MJPEG / H.264 video streaming via media player ................................................................................ 47
13 Connecting via ONVIF Profile S or PSIA .................................................................................................... 48
13.1 Evolution Camera with a PSIA driver .................................................................................................... 48
13.2 Evolution Camera with an ONVIF Profile S driver .................................................................................. 48
14 Troubleshooting and Technical Support ................................................................................................... 48
14.1 Contact Technical Support .................................................................................................................. 49
15 Copyright and Legal Notices .................................................................................................................... 50
16 Appendix A - Technical Specifications ...................................................................................................... 51
17 Appendix B – Frame Rate, Resolution & Storage Needs ........................................................................... 58
18 Appendix C – NVR and Storage Partners ................................................................................................. 58
19 Appendix D – Drill Template, Evolution Outdoor Dome Camera – UK........................................................ 59
20 Appendix E – Drill Template, Evolution Outdoor Dome Camera – USA ...................................................... 60
21 Appendix F – Drill Template, Evolution Indoor Camera – UK ..................................................................... 61
22 Appendix G – Drill Template, Evolution Indoor Camera - USA ................................................................... 62
7
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
1 Oncam Grandeye 360° IP Camera Basics
Oncam Grandeye’s IP series cameras are based on an innovative technology that uses a fisheye lens to create a 360° view with an extremely large area of coverage. With proper placement, the Oncam Grandeye 360° IP camera can replace two or more conventional fixed cameras for seamless coverage of an entire scene with no gaps or blind spots. The ability to ‘see’ in all directions at once makes Oncam Grandeye 360° IP cameras ideally suited for total situational awareness.
The 5‐megapixel sensor produces enough detail to allow digital pan/tilt/zoom (PTZ) operations over the entire field of view. But unlike conventional PTZ cameras, Oncam Grandeye 360° IP cameras are silent. There are no mechanical motors and gears which are prone to wear and eventual failure. The camera produces three types of views, each suited to a particular set of requirements.
1.1 Fisheye View
The high quality fisheye lens produces a spherical image from which all other views are derived. The raw image appears warped around a central axis. Special dewarping software is built into the NVR / VMS to convert the spherical image into a flat view which is more familiar to human viewers. When using video management software (VMS) to record a fisheye video stream, the entire image is preserved, allowing you to ‘retrospectively’ look at all directions, regardless of the area being viewed live or when viewing recorded video after an incident has occurred.
2 The Evolution Camera Range
2.1 IP camera Module
The camera module (CM) has the ability to be mounted in to a number of different camera housings and mounting adaptors. These alternative housings form a camera range of three models. Each model within the range is suitable for mounting in different applications and environments.
The camera modules within the housings and mountings are based on two modules; (long nose camera module and a short nose camera module), but camera firmware, the software features, the connection ports, the communication ports and input / output connections are the same across the Evolution range.
Common Features of the Evolution camera range:
• The camera module is able to be configured to stream either an H.264 or MJPEG single stream at either:-
o 10fps with a frame size of 2144x1944 pixels (4MP) o 15fps with a frame size of 1488 x 1360 pixels (2MP) o 15fps with a frame size of 1056 x 960 pixels (1MP) o 15fps with a frame size of 528 x 480 pixels (1/4MP)
• The user can enable and configure a second fisheye stream for either H.264 or MJPEG. If the second
stream is enabled the maximum frame rates of both the main stream and the second stream will be reduced (see section 11.3.6 for the maximum fps when the second stream is enabled)
• The user has simultaneous access to a third stream of MJPEG at a fixed fps with a frame size of 528 x 480
pixels (1/4MP)
• An external microphone can be connected to the camera module via a 3.5mm input jack. Please contact
Oncam Grandeye for details of compatible microphones.
• The camera module has 1x input and 1x output hardware alarms connected via hardwire plug connector.
• The camera module can be powered from an external 12v dc power source, with a minimum 1amp
supply, or via Power over Ethernet (IEEE Standard 802.3af)
• The camera module design allows for easy and fast installation in to any of the camera module housing
options.
8
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
2.1.1 Evolution - Outdoor Dome Camera (for external and internal use)
• IP66 rated mini-dome model, outdoor/indoor use
• Uses the short nose Evolution camera module
• Surface mounting wall / ceiling
• Cable entry - rear entry via 2x grommets / side entry via compression or conduit gland
The Outdoor Dome Camera is an IP66 weatherproof surface mount configuration. The enclosure is constructed of an aluminium die cast part (mounting base) and a plastic trim ring assembly.
The die-cast mount base contains the means for mounting the product to a mounting surface or to pendant adapter. It also provides the means for mounting the camera module (CM) and the mounting holes for attaching the trim ring assembly.
The trim ring assembly consists of two main parts – injection moulded trim ring and optical dome bubble. The dome bubble is fastened to the trim ring via laser welding. This trim ring assembly has captivated fasteners for attachment to the die-cast mount base.
This enclosure, when fastened is IP66 rated and will mount to a vertical or horizontal surface. IP66 rated waterproof compression glands allow cable entry in to the outdoor enclosure.
The Evolution Outdoor Dome camera comes with a Gore® vent fitted in to the inside of the die-cast mount base. Gore ® vent helps create a breathable membrane that is waterproof.
Gore® Vents provide a simple, yet technologically advanced solution to manage differential pressure within a container to maintain container regulatory guidelines that require ventilation for heavy-duty waterproof and breathable products.
2.1.2 Evolution - Indoor Camera (internal use only)
• Indoor camera model, indoor use
• Uses the short nose Evolution camera module
• Surface mounting wall / ceiling
• Cable entry - rear entry / side Entry
• Pendant adapter (optional)
The Indoor camera is an indoor surface (ceiling, wall, desk top) configuration. It uses a metal mounting plate and plastic enclosure (trim ring) to enclose the camera module (CM) and wiring.
The metal mounting plate attaches to the ceiling or wall and provide the means for mounting the camera module (CM) and the trim ring together.
By using the optional pendant adapter (OBE-01-IWA [white] / OBE-01-IBA [black]) can be directly mounted to any length of pipe (M32). This is popular in businesses with high ceilings.
2.1.3 Evolution - Indoor Concealed Camera (internal use only)
• In-wall / In ceiling concealed model, indoor use
• Uses the Evolution ‘concealed’ camera module
The Indoor Concealed Camera is a concealed (above) ceiling mounts / (behind) wall mount configuration. The concealed camera module (CCM) is the same as for the indoor and outdoor mini domes but uses a different front lens nose. It has a front cover with a longer nose, allowing mounting above false ceilings and false walls of thickness between 6mm (1/4”) and 25mm (1”) through the use of a mounting adaptor ring and mounting retaining nut that attaches to the front cover.
The mounting retaining nut tightens against the false ceiling/wall, sandwiching the ceiling/wall material between the concealed mounting adaptor ring and mounting retaining nut. This camera requires access from above the ceiling or behind the wall to install.
9
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
3 Planning Your Deployment
Camera placement is an important factor in planning your deployment. If your goal is to provide comprehensive coverage of a very wide area, then look for a mounting position with an unobstructed view.
3.1 Ceiling Mount
Ceiling mounting is preferred if most of the action is occurring below you on a horizontal plane. A good example is an indoor shopping mall or a hotel lobby. Small to mid‐sized rooms can be very effectively covered with a single camera placed in the middle of the ceiling. Use to monitor doorways, customer service counters, or other areas of special interest. A top‐of head shot is captured when someone stands directly below the camera, but much more of their face and body will become visible as they move away in any direction.
3.2 Wall Mount
If you want to get closer to a subject to see under their hats and hair, then a wall‐mounted position is best. Wall mountings below 1.8 metres (6 feet) can be obstructed by people walking by and, if the camera is mounted too high, the upper portion of the view is wasted. Vertically oriented scenes, such as escalators and cityscapes, are very well suited to wall mounting. The ideal shot will be found somewhere near the middle height and far enough away from the object to get a full view. This position places an equal amount of the view above and below the mid‐line. Transportation applications should use a wall‐mount configuration for views outside of the vehicle. Ceiling mounting is often not practical because it is difficult to get the camera high enough above the ground. For views inside the vehicle, a ceiling‐mounted camera is quite acceptable.
3.3 Some Examples
One ceiling‐mounted camera can cover an entire room.
10
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
3.4 Zones of Coverage
There are four key zones of coverage. All camera lenses have to trade off focal length versus angle of view. This is especially true for hemispheric fisheye lenses where the viewing angle is 180° in every direction. The fine detail and high‐pixel count required for face recognition or license plate reading is limited to close‐up views, however there is a very broad section of the view where detection and identification can occur.
3.4.1 Facial Recognition
(=< 5m / 15ft)
Faces will be clearly visible and well defined.
Example: a camera mounted at 3m/9ft high, within less than 5m/15ft of a doorway, the camera view will be able to identify and recognise a person entering.
3.4.2 Facial Identification
(between 5m and 9m / 15ft and 27ft)
People and objects are identifiable based on clothing, make and model of a car, body type
and other criteria. At a counter or customer service desk, the identity of the customer is
verifiable.
A wall‐mounted camera works well for close‐up views and low‐angle shots.
The area of coverage can be enormous for a camera that is mounted high above the ground. This one is 10 stories high, yet cars and people on the street below are still visible.
11
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
3.4.3 Object Recognition
(between 9m and 40m / 27ft and 120ft)
Faces are somewhat indistinct, but clothing, body type and behaviour are distinguishable. If viewing co-workings or someone known within a scene, the viewer would be able to recognize then. Be able to clearly distinguish between people, animals and vehicles.
3.4.4 Situational Awareness / Movement Detection
(=> 40m / 120ft) The viewer will be able to see movement of objects and make some judgement on the
direction of the movement.
3.5 Overhead Viewing Angle
Ceiling‐mounted cameras will capture a top‐of‐head shot when the person under the camera. Hats will extend that top of‐head zone by a few feet. To ensure a full‐face shot in a given area, use the chart below to estimate where the face zone is relative to the height of the camera.
For example, in the picture below an eight‐foot ceiling‐mounted camera should be located 1.5 metres (5 feet) behind the counter. If this amount of space is not available, consider wall mounting the camera instead.
The usable horizon is determined by camera height and any obstructions that get in the way. For example, you cannot see anything higher than a ceiling‐mounted camera, and buildings and landmarks may get in the way. However, the horizon can be several metres away for a high‐mounted camera with no obstructions. This makes the Oncam Grandeye IP 360° cameras an ideal choice for urban street surveillance and traffic monitoring.
12
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
3.6 Positioning Multiple Cameras
For more detailed surveillance of a large area, add cameras every 9 to 15 metres (30 to 50 feet) to form overlapping circles of coverage.
3.6.1 Indoor Placements
Ceiling mounted cameras should be high enough to get an overview of the room, but not so high as to be away from the action. A height of 2.7 to 4.6 metres (9 to 15 feet) above the ground is ideal for most commercial buildings. Go higher for large auditoriums, lobbies and malls.
Wall mounted cameras should be low enough to fill the image, but not so low as to be obstructed. Try to avoid capturing too much ceiling in your shot.
3.6.2 Outdoor Placements
With ceiling or pendant mounted cameras, generally the higher you can mount the camera, the more area it will cover. Watch out for bright light sources – it is better to be below them than above. Mount at least 4.6 metres (15 feet) above ground to avoid vandalism.
For wall mounted cameras, mount at 3.7 to 4.6 metres (12 to 15 feet) above street level, possibly under an eave. Avoid direct sunlight; northern exposures are preferable
3.7 Lighting Recommendations
Auto sensor adjustment works best for nearly all environments. The camera continuously adjusts the exposure to optimise the image. Night mode drops the frame rate in half and doubles the exposure time. The image is rendered in black and white for better contrast. Motion‐sensing lights may be used to illuminate the scene: The camera will quickly adjust when lights turn on.
3.7.1 Lighting tips
There are settings within the camera’s web pages which will allow the camera to be used in a wide range of applications and lighting conditions
Image controls include: Brightness / Contrast / Saturation
13
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
But sometimes light condition may require additional special feature settings, these include;
EV Compensation: Can increase or decrease the image exposure. This should be adjusted to suit the lighting conditions. Wide Dynamic Range: This increases the dynamic range in difficult lighting conditions. It will lighten dark areas without over brightening light areas. WDR Level: This slider is only available when WDR is enabled and adjusts the amount of WDR processing that is applied to the image.
3.7.2 Summary
By following the simple recommendations in this guide you will be optimizing the performance of your Oncam Grandeye 360° IP camera. You can determine how many cameras are needed for complete coverage and position them at the best viewing angles. The image will appear in the most usable area of the sensor and you will not waste a large portion of the shot on ceilings or sky.
14
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
4 Installation Steps
This chapter provides a step‐by‐step guide to the installation and first‐time operation of your Oncam Grandeye EVOLUTION 360° IP camera. Please refer to the Camera Web Interface configuration chapter for a more detailed explanation on features and functionality. All Oncam Grandeye 360° IP cameras can be either wall mounted or ceiling/table mounted. These cameras have an exceptionally wide viewing angle, so some consideration should be given to camera location. For example, if one side of a scene is brightly lit and another is in dark shadows, you may have to choose which portion of the picture to optimise.
4.1 Evolution Indoor Camera
4.1.1 Supplied Parts
• Evolution indoor ceiling plate
• Camera module
• Cover
• Quick start guide
• Mounting template
4.1.2 Description
This enclosure is designed for indoor use in surface mount or pendant applications. In its basic form, the indoor model consists of the Camera Module, a mounting plate, and a cover.
The enclosure portion of this model consists of two parts – a die cast mounting plate and a plastic cover. The cover does not require any fasteners to fix it to the base plate. Wires can be routed into the enclosure either from the back or the side.
4.1.3 Installation Steps
The ceiling mount plate is attached to a wall or ceiling surface via the holes and slots located on the plate. The fasteners used should be appropriate for the surface material, and should collectively support at least four times the weight of the camera and assembled enclosure.
The enclosure is designed to cover a hole or box in the mounting surface through which the wires are pulled. The mounting plate has been designed with holes and slots to allow it to be mounted directly to most European or American standard electrical boxes, if desired.
If the indoor installation is subject to vandalism, the Evolution outdoor camera model should be used. This indoor enclosure should only be used where it is well out of reach.
The wires are pulled through the centre hole in the plate, and then the plate is secured to the mounting surface. It is important to pay attention to the orientation of the plate, as this will affect where the elongated ears of the cover are oriented.
The enclosure has been designed to allow wires to be routed under and then around or over the Camera Module to the connection points. The alarm connector (if used) can be removed from the Camera Module to facilitate connection and service.
15
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
The Camera Module is installed by rotating the camera into the cleat in the base plate and fastening it in place with the captive thumb screw. Wires should be routed such that they do not cross over the lens area when the trim ring is attached.
A BNC video connector is provided for camera testing and providing a spot monitor video output. If used, then check the dip switch settings for either PAL or NTSC video. Once testing is completed, the BNC test cable can be removed. The cover can then be fastened in place by orienting the
elongated ‘ears’ of the cover with the elongated tabs on the mounting plate and pushing it on until it snaps in place. There are guide tabs that will align the cover as it is pushed into place. To remove the cover, just grasp the sides of it and pull away from the mounting surface.
For installations where the wiring is from the side, there is a thin section of plastic on the cover at one end, this can be easily removed with a pair of pliers. Wiring in this case should be routed through the tunnel in the mounting plate.
4.1.4 Pendant Mounting
For applications that require the enclosure to be mounted below the ceiling plane, the accessory pendant adapter can be used to adapt the enclosure to M32 male pipe threads. This is an optional installation kit and can be purchased from Oncam Grandeye.
Wiring is fed down inside the pipe and enters the enclosure from the back. Before mounting the adapter to the pipe, the adapter is to be mounted to the mounting plate, there are two snap features in the pendant adapter that allow the mounting plate to be temporarily fastened to the mounting plate. The mounting plate should then be secured to the pendant adapter with the two thread forming plastite screws, which are screwed in to the two bosses in the pendant adapter. Mount the pendant adapter to the M32 pipe and pull wires through the mounting plate as before. Wiring and cover installation is then the same as a ceiling application.
4.1.5 Wall (Vertical Surface) Mounting
The Evolution housing may be mounted directly to a vertical surface. The wall mount is used for mounting to a vertical surface with the housing in a horizontal attitude (wall, pole, or building corner). The indoor pendant adapter as well as the wall mount to pendant adapter is required.
The base plate is used to adapt the wall mount to recessed wiring boxes or to uneven surfaces. Wiring is passed through the plate. It is then fastened to the mounting surface or box with appropriate fasteners. The mounting cleat is then attached to the base plate by placing the cleat over the two threaded studs that protrude from the base plate and fixing it with nuts provided. It is not symmetrical so the part has an arrow stamped on it. The arrow must point upward for proper installation. The wiring is passed through the mount and then the top is hooked over the upper cleat and lowered over the bottom cleat. The mount is secured to the cleat with the two socket head set screws using a 3/32” hex wrench.
When mounting to a studded wall or solid wall and where no electrical box is used, the base plate is not needed. With this method the cleat plate can be mounted directly to the wall/stud and the wiring is passed through the cleat plate via the holes provided on either side so that the wire can run on either side of a wall stud. Likewise, if the installation is to a pole or corner mount, the base plate is not needed.
For mounting to a wall surface where wiring cannot be fed though the wall, a flexible conduit entry can be created to the wall mount on the left and right sides of the part. There is a flat area on both sides for this purpose. It will be necessary to drill a hole in to the mount arm in these locations for the appropriate hole size for the conduit adapter of choice. It is recommended that the conduit hole is created prior to installing the mount to the cleat plate. It is suggested that the connection be done with a length of flex conduit.
16
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
4.2 Evolution Indoor Concealed Camera
4.2.1 Supplied Parts
• Camera module
• Concealed mounting bezel
• Concealed mounting locking nut
• Quick start guide
4.2.2 Description
This enclosure is designed for indoor use in above ceiling applications. In its basic form, the in ceiling model consists of the Camera Module, a bezel, and a mounting nut.
The enclosure portion of this model consists of parts – a plastic ceiling bezel and a plastic nut. The only portion of the camera that is visible below the ceiling is the lens and bezel.
4.2.3 Installation Steps
The in ceiling model requires that the installer have access to the space above the ceiling. The ceiling surface is first drilled or cut to accept the bezel (2 ½” or 64mm). Attach the supplied hole template to the installation location and mark the hole. If it is possible, remove the false panel and then using a pad saw carefully cut out the hole or using a hole cutter, cut a 64mm (2 ½”) hole.
Insert the concealed bezel through the hole from the front of the cut out (Lens side) with one hand and using the other hand fit the blue locking nut to the rear to secure the bezel in place.
Ensure the locking nut is correctly orientated so that the smother side is against surface of the ceiling / wall material, and the finger grips are exposed.
Do not over tighten the locking nut.
This camera is not to be used in air handling spaces.
Failure to comply with this requirement
will invalidate the warranty.
17
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
The ceiling material should be strong enough to support four times the weight of the camera and cabling, or a suitable stiffener such as a metal plate should be used above the ceiling surface. Once the bezel is tight, the Camera Module is inserted into the bezel from above.
Site the camera module in to the rear of the bezel. Ensure the Camera Module is secured to the bezel by tightening the thumb screw on the camera module so the screw sits tightly into the slot on the bezel ring.
Attention should be paid to the orientation of the Camera Module, as this will affect where the edges of the image are oriented in the resulting full screen picture. Once the Camera Module is oriented, the thumb screw is tightened to fix the camera in the desired position.
The wires can be routed under and then around or over the camera module to the connection points. The alarm connector (if used) can be removed from the Camera Module to facilitate connection and service.
A BNC video connector is provided for camera testing and providing a spot monitor output. If used, then check the dip switch settings for either PAL or NTSC video. Once testing is completed, the BNC test cable can be removed. Wiring should be fastened down to a nearby ceiling member so that there are no torque forces acting on the camera module.
4.3 Evolution Outdoor Dome Camera
4.3.1 Supplied Parts
• Evolution ceiling base assembly
• Camera module
• Trim ring assembly
• Security screw driver bit
• Quick start guide
4.3.2 Description
This enclosure is a fully sealed IP-66 rated enclosure that is also vandal resistant. It is designed so that there is no opening for moisture to enter the inner enclosure. All mounting perforations are outside of the sealed area of the enclosure. The wire grommets on the back are sealed until perforated by the installer. The integrity of these seals is essential in order to keep moisture from entering the enclosure.
The back of the ceiling base has two wire grommets for cable entry plus a Gore® Vent to allow the enclosure to breathe. The Gore® Vent is the small white circular patch on the back that allows the enclosure to vent without letting moisture in. As the enclosure cools at night it contracts and will draw in cool, moisture laden air. When it heats up
the next day, the air expands and pushes out. This warmer air will not hold moisture, so over time condensation builds inside the enclosure. The vent allows the enclosure to breathe without drawing in moisture. The Gore® Vent is relatively fragile, do not probe or touch it unnecessarily
This camera is not to be used in air handling spaces.
Failure to comply with this requirement
will invalidate the warranty.
18
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
The unit also has an M20 conduit entry on the side. A 20mm to 1/2“ adaptor can be fitted if imperial sized conduit is being used. The enclosure has an o-ringed plug installed in the conduit entry as shipped from the factory. If the conduit connection is used, the installer must make sure that water cannot enter the enclosure from the conduit.
The two wire grommets are designed for a single wire/cable each, which is 3.5-5mm in diameter (0.138 – 0.197”). This range is intended to accommodate most Ethernet and alarm signal cables used in the industry.
Puncture the diaphragm inside of the grommet by inserting a wire or by using a sharp tool and gently pull the cable back to secure and seal.
4.3.3 Installation Steps
The ceiling base is attached to a wall or ceiling surface via the four holes located outside the trim ring seal joint. These holes are located on the two “ears” of the enclosure, are open to the back, and are not threaded. These holes will pass typical #10 hardware and have 25mm (1”) of internal boss to pass through The fixing hardware used should be appropriate for the surface material, and should collectively support at least four times the weight of the camera and assembled enclosure. If the installation is subject to vandalism, additional consideration needs to be made when selecting fixing hardware and mounting strategies. The enclosure is designed to cover a hole or box in the mounting surface through which the wires are pulled.
Do not put more than one wire through a
cable entry grommet as it will not seal properly.
This may invalidate the warranty.
Do not drill holes through the enclosure.
This will defeat the IP66 rating and it will not seal properly.
This may invalidate the warranty.
19
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
The enclosure is designed to allow wires to be routed around or over the camera module to the connection points. The alarm connector (if used) can be removed from the Camera Module to facilitate connection and service.
The Camera Module is installed by attaching and routing the cables, then rotating the camera into the cleat in the base plate and fastening it in place with the captive thumb screw. Wires should be routed such that they do not cross over the lens area when the trim ring is attached.
A BNC video connector is provided for camera testing and providing a spot monitor output. If used, then check the dip switch settings for either PAL or NTSC video. Once testing is completed, the BNC test cable can be removed. Then the dome/trim ring assembly is fastened in place using the four captive security screws and the provided security driver bit. (Refer to dome handling and cleaning section
for proper procedures on handling the dome bubble).
For installations where the side conduit entry is used for wiring, the sealed plug is removed and a 20mm conduit connector is used to attach directly to the enclosure. Care must be taken so as not to allow water to run into the enclosure from the conduit.
4.3.4 Pendant Mounting
For applications that require the enclosure to be mounted below the ceiling plane, the accessory pendant adapter must be used to adapt the enclosure to 1 ½” NPT female pipe threads. The pendant adapter has a male thread, so if the installation is to a length of pipe, a female-female coupler needs to be used. Use Teflon pipe tape on pipe threads to allow compliance, sealing and alignment. Wiring is inside the pipe and enters the enclosure from the back. The adapter is first mounted to the pipe. Wires are pulled into the enclosure as before. The ceiling base is then mounted to the pendant adapter using the 4 screws provided.
4.3.5 Wall (Vertical Surface) Mounting
The Evolution housing may be mounted directly to a vertical surface. If the application requires mounting to a vertical surface but with the housing on a horizontal plane (wall, pole, or building corner) the pendant adaptor and wall mount is required. The wall mount has a 1½” female pipe thread, allowing the adapter to be directly screwed into it. There is a set screw in the 1½” thread area which locks the housing into a fixed rotational orientation. Wiring is fed through the wall mount and adapter to the enclosure.
The wall mount kit fastens to the base plate, a wall mount cleat and the wall mount. and the pendant adapter with its associated mounting screws. The base plate is used to adapt the wall mount to recessed wiring boxes or to uneven surfaces. Wiring is passed through the plate. It is then fastened to the mounting surface or box with appropriate fasteners.
The mounting cleat is then attached to the base plate by placing the cleat over the two threaded studs that protrude from the plate and fixing it with the nuts provided. It is symmetrical so it can be mounted in either direction. The wiring is passed through the mount and then the top is hooked over the upper cleat and lowered over the bottom cleat. The mount is secured to the cleat with the two socket head set screws using a hex wrench.
When mounting to a studded or solid wall and where no electrical box is used, the base plate is not needed. With this method the cleat plate can be mounted directly to the wall and the wiring is passed through the cleat plate via the holes provided on either side so that the wire can run on either side of a wall stud if necessary. Likewise, if the installation is to a pole or corner mount, the base plate is not needed.
4.3.6 Pole or Corner Mounting
The wall mount may be used in conjunction with the accessory pole mount when mounting to a light pole, or to the corner mount to attach to the corner of a building. The pole mount is a bracket that attaches to a pole 100 to 150mm (4 to 6”) in diameter, with the stainless steel clamping bands provided.
20
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
The bracket has a hole in it that accommodates a conduit connection into the back of the wall mount if it is necessary to protect the wires from the environment. The wall mount cleat attaches directly to the pole bracket in the same manner as the base plate.
The corner mount is a bracket that adapts the wall mount to fit diagonally on the corner of a building. Attachment to the building is via four appropriate fixings (not provided). The bracket has an opening that accommodates a conduit connection into the back of the wall mount. The wall mount cleat attaches directly to the corner mount bracket in the same manner as the pole mount.
4.3.7 Sun Shield
The sun shield is an accessory for applications where the enclosure is exposed to direct sunlight. The shield provides an outer surface that is separated from the enclosure by an air gap. The heat that is absorbed in the shield is not conducted into the enclosure because the air gap acts as an insulator. On a clear sunny day the enclosure’s internal temperature can get too hot for the camera even when the ambient temperature is not very high. A sun shield is therefore recommended whenever there is significant exposure to the sun. The shield is only used in pendant mounting configurations with or without the wall mount. The shield is attached to the top of the pendant adapter with the three supplied screws.
5 Corner, Wall and Pole Mount Brackets
5.1 Evolution Wall Mount Kit - OBE-04-O#A
(#=W : white / #=B : black)
Ref. Qty Description
1 1 Wall Mount Arm
2 1 10-24 rotation set screw 3 1 Cleat Plate 4 1 Mounting Plate 5 2 Mount set screws 6 2 Flat Washers 7 2 Nylon lock nuts
21
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
5.2 Evolution Corner Wall Mount Adapter OBE-05-O#A
(#=W : white / #=B : black)
*This needs to be used with the wall mount kit - OBE-04-O#A
5.3 Evolution Pole Mount Adapter OBE-03-O#A
(#=W : white / #=B : black)
*This needs to be used with the wall mount kit - OBE-04-O#A
Ref. Qty Description 1 1 Corner Mount Adapter *
Ref. Qty Description 1 1 Pole Mount Adapter 1 2 Stainless Steel Strap Clamp
22
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
5.4 Installation
5.4.1 Wall Mount
The wall mount cleat plate (3) is first fastened to the wall surface using fasteners (not supplied) which are appropriate for the wall material and which are capable of supporting at least four times the weight of the wall mount and camera. Be sure that the arrow mark on the plate is oriented up. Cables are passed through one of the holes in the plate. The wall mount arm is then hooked over the top tabs on the cleat plate and the two set screws on the bottom are tightened to lock the arm to the cleat plate. Cables are passed through the mount arm and out the threaded hole on the end of the arm.
5.4.2 Installation on Rough Surfaces or Over Electrical Boxes
If the mount is to be installed over an electrical box, or if the wall surface is uneven, the wall mount plate (4) is first fastened to the box or the wall surface and then the cleat plate is fastened to it using the two nuts and washers provided. This provides an even surface for the cleat plate to work with.
5.4.3 Pendant Adapter – Evolution Outdoor Housing
The Outdoor Evolution camera housing requires the use of a OBE-01-O#A
(#=W : white / #=B : black)
pendant adapter (sold separately) to fit it to the wall mount. Cabling is passed through the adapter, which is then threaded onto the mount arm. The rotation set screw (2) is tightened to lock the camera into the desired rotational orientation. The outdoor enclosure base is then mounted to the pendant adapter with the cables passing through the IP66 grommets in the back of the enclosure.
5.4.4 Pendant Adapter – Evolution Indoor Housing
The Indoor Evolution camera housing requires the use of the OBE-01-I#A
(#=W : white / #=B : black)
pendant adapter and the OXM-03-UWA adapter (sold separately) to fit it to the wall mount. Cabling is passed through the gender adapter, which is then threaded onto the mount arm. The indoor pendant adapter is then threaded onto the gender adapter. The rotation set screw (2) may be tightened to lock the camera into the desired rotational orientation. The indoor enclosure base plate is then mounted to the pendant adapter with the cables passing through it.
Mounting directly to an electrical box may not provide sufficient
mechanical strength to withstand a physical blow to the mount arm.
We do not recommend mounting to electrical boxes when the camera is
within reach. When mounting to an electrical box, make sure that
the box is structurally sound enough to support the camera.
23
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
5.4.5 Corner Mount Applications
The corner mount adapter is first fastened to the wall surfaces using four fasteners (not supplied) which are appropriate for the wall material and which are capable of supporting at least four times the weight of the wall mount and camera. The wall mount cleat plate (3) is fastened to the corner mount adapter using the two nuts and washers provided with the wall mount. The wall mount plate (4) is not used. The hole in the corner adapter is designed to accept a flexible conduit adapter if desired. Cables are passed through this hole and into the mount arm, which is fastened to the cleat plate as described above.
5.4.6 Pole Mount Applications
The pole mount adapter is first fastened to the pole using the two stainless steel straps (2). The wall mount cleat plate (3) is fastened to the corner mount adapter using the two nuts and washers provided with the wall mount. The wall mount plate (4) is not used. The hole in the corner adapter is designed to accept a flexible conduit adapter if desired. Cables are passed through this hole and into the mount arm, which is fastened to the cleat plate as described above.
24
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
6 Audio Input
The mic input on the camera module follows the computer industry de facto standard for mic inputs on PCs. The physical connector is a 3.5mm stereo audio jack. As wired, it will work with an ordinary electrets mic sold for PC use. We have recommended two configurations for interfacing a mic with the camera depending upon application requirements. The LOCAL mode is the out of box configuration where the camera module is connected to a low cost electrets mic in close proximity to the enclosure. The electret mic and its connecting cable must be electrically floating to prevent noise and hum as a result of ‘ground loops’ We recommend a cable length of 1meter or less.. Any length longer than this will result in noise interference with the audio.
7 Power Requirements
Power can be supplied in two alternative ways:
• Power over Ethernet (PoE): Both power and data are connected using a single cable, plugged into the
Ethernet port of the camera. The PoE supply equipment must be compliant with IEEE 802.3AF.
• Direct DC Input: Use only a UL/CSA‐approved LPS or NEC Class 2 power source with a 12V DC 1A AC
adapter (not supplied). It must be connected to the camera via the 12V jack. This connector is a 2.1mm positive centre jack.
If using an external power supply, note that use of power in
excess of 12V DC may damage the camera
and void the warranty.
25
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
8 Preparing the Camera for Installation
Make a note of the camera’s location and MAC address as this information is needed during camera configuration. The MAC address can be found on a sticker on the side of the camera module and also on the rear of camera module.
8.1 Cabling the Camera for Ethernet and Power
Pass a stripped Ethernet cable (CAT5 or better) through either a 20mm compression cable gland (side entry) or through one of the rear rubber grommets of the enclosure. Now prepare the wires for an RJ45 connector (not supplied) for crimping.
Use appropriate equipment to crimp the RJ45 Ethernet connector. Pass the Ethernet cable around the Camera Module; ensure that the cable is secure by clicking connector into position.
Power may be supplied to the camera via PoE IEEE 802.3af through the Ethernet cable. If PoE is not available, use only a UL/CSA‐approved LPS or NEC Class 2 power source with a 12V DC 1A AC adapter (not supplied), this must have a wired plug connector with the correct polarity (+ve center). This cable should be fed through the rear second rubber grommet (supplied).
8.2 Cabling the Camera for External I/O
If an external I/O is to be connected, remove the multi-way connector block and wire it.
26
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
8.3 Alarms OUT
When an event occurs that is a trigger for an external alarm on the Evolution camera, the Alarm OUT pin outputs a signal (Low to High), which can be used to drive external alarm circuit (known as sourcing). The signal is 3.3V at 15mA (max).
LOAD
OUT
GND
3.3V @15mA max (Sourcing)
1 2
3 4 5 6
0V
8.4 Alarms IN
When Alarm IN gets shorted to GND, the camera’s internal alarm gets latched. Through the web browser the user can specify the duration of time it gets latched for (10 sec’s, 30 sec’s, 60 sec’s, 300 sec’s, 600 sec’s or infinite). After the specified amount of time has passed, the internal alarm will then be cleared. Alarm RESET pin is optional and can be used for overriding the counter in order to clear the internal alarm before the specified amount of time is up, by shorting it to GND. In the case where the duration is set to be infinite, this pin must be used in order to clear the internal alarm.
RESET
GND
IN
1 2
3 4 5 6
(Optional)
8.5 Camera Test
Ensure that the Camera Module has been inserted into its fixings on to the mounting base / plate. Ensure the thumb screw is fastened so there is no movement of the Camera Module.
27
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Connect the network cable (RJ45) and the alarm input / output / alarm reset cable to the camera module along with the remote microphone if this is being used. If the device is not being powered via PoE IEEE 802.3af through the Ethernet cable, use only a UL/CSA‐approved LPS or NEC Class 2 power source with a 12V DC 1A AC adapter (not supplied), this must have a wired plug connector with the correct polarity (+ve center).
The camera can now be powered.
A BNC connection has been supplied for local testing and could be used to feed a fisheye image to a spot monitor. Connect a suitable PAL or NTSC composite video test monitor to view the live “Fish Eye” image from the Camera Module. By selecting DIP switch #2, to either (1-on) PAL or (0-off) NTSC analogue video can be viewed.
This signal can also be routed to a permanent “spot” monitor if desired.
The focus is set at the factory so no adjustment is necessary.
Carefully re‐seat the dome trim ring, taking care not to damage the dome surface, and ensuring that the dome seal is retained correctly.
• Outdoor Dome Camera - Refit the dome screws with the supplied Torx driver, and tighten to ensure
ingress protection is maintained around the dome seal.
• Indoor Camera – align the dome trim ring over the base plate so the retaining clips align correctly to allow
the trim ring to clip in to place.
Remove the screen protection film from the dome. Carefully polish the Surface of the dome with a soft, lint‐free, nonabrasive cloth to complete the installation.
28
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
9 Dome Handling and Cleaning
The standard dome used in the Evolution enclosure is made of a polycarbonate (PC) polymer. Care must be taken when handling or cleaning PC bubbles so as to not scratch the surface.
• Always handle the dome by the outside edge of the flange or trim ring assembly.
• When handling domes, contact with the inside surface of the dome should be avoided.
• If dust or other surface contaminants accumulate in the dome’s interior, it should be removed with clean,
dry air pressure (compressed air cans).
• If heavy residue (spots, streaks, stains) or any other contaminants are present only on the surface of the
dome, these can be removed with a solution of a mild liquid dish detergent or isopropyl alcohol and water and lint free “soft” paper towels or a microfiber cloth. After cleaning, the affected area of the dome should be blown off with clean, dry air.
• Scratches or other surface blemishes within the material of the dome may possibly be removed by
applying a non-abrasive wax (Megiuars #18 or equivalent) with a microfiber cloth to the affected area. Again, after waxing, remove dust or lint with clean, dry air.
Excessive pressure or rubbing on the dome’s surface
can cause permanent scratches that may render
the dome unusable.
29
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
10 First Time Operation
Once the camera has been successfully installed, it needs to be configured for first use. The steps for doing this are as follows:
• Configure the network setting
• Use a browser to connect to the camera Web interface for the first time AND set the root password
• Check the cameras view and ensure the camera is correctly focused
• Image setup
• Set up motion detection, if required
• Set up privacy zones, if required
• Define rules and actions for the event alarm
In order to use the camera, you will need to know its IP address. There are two typical installation types. The first type uses a DHCP server or router to automatically assign unique, valid IP addresses to each camera. The alternative is a manually configured network using static IP addresses.
10.1 DHCP‐Based Installation
The camera is configured for DHCP by default so that multiple cameras can be added to the network, each with a unique IP address. If you are using DHCP for the permanent camera address, be sure to reserve that address with the DHCP server to ensure that the assigned IP address does not change. If a DHCP server is not found or DHCP is disabled, the camera will revert to its current static IP address.
10.2 Static IP Installation
If there is no DHCP server or DHCP is disabled, then the factory default IP address is 192.168.0.200. For a multi‐camera install, always introduce the cameras one at a time and then re‐address them to a non‐conflicting static IP address. This is done using the Network Settings page of the camera Web interface or the IP Configuration Tool.
Install the Oncam Grandeye IP Configuration Tool. The latest version of this is available on the Oncam
Grandeye website www.oncamgrandeye.com and the IP addresses of the Oncam Grandeye 360°
IP camera can be configured.
30
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
10.3 Finding Available Cameras
The Oncam Grandeye IP Configuration Tool is used to find the IP address of installed Oncam Grandeye 360° IP cameras, whether or not they are addressable on your current sub‐LAN. Press the Refresh List or Discover button to find new cameras or update information on cameras already in the list.
If you need to change the IP address of a camera, check the box next to the IP address, then select the Network Settings tab. Enter the new IP address, Subnet Mask and Gateway. You can identify cameras by their MAC addresses, which are printed on the camera label.
10.4 Connecting to the Camera
To connect to any camera on your network, simply enter the IP address of the camera into the address bar of a browser running on a PC on the same network. To access the Web interface, open a browser window (Internet Explorer or Firefox) and enter the IP address of the camera. (e.g. http://192.168.0.200) The first response will be an authentication screen requesting a User name and Password.
Default User name: admin
Default Password: admin (case sensitive)
NB: The admin user is permanent and cannot be renamed or deleted.
31
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
When accessed with Internet Explorer, the camera uses an ActiveX control. If this is the first time the camera is being viewed on this IP address, you may get a warning:
NB: The Web site wants to run the following add‐on: “Grandeye ActiveX Control” from Grandeye Ltd.
Allow this control to run and then wait a moment for installation. You should now be able to see live video from the camera. (Grandeye is the technology arm of Oncam Grandeye.)
11 Camera Web Interface
Mos t of the c onfigura tion s ettings for the O nc a m G randeye 360 degree IP camera can be access ed through the Web interface of the camera. To access the Web interface, open a browser window and enter the IP address of the camera. After you enter the User name and Password for this camera the first screen you see will be the Control Panel screen.
11.1 Control Panel tab
The Control panel is the main page of the Web interface. Other tabs can be acces sed from this s c re en, which will be covered one by one. The camera produces a fis heye view which is a full 360 degree image in a circular format using one of the following formats.
4M Pixel 2144 x 1944 2M Pixel 1488 x 1360 1M Pixel 1056 x 960
0.25M Pixel 528 x 480
32
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
The camera time is shown:
To s et the c urre nt time , go to the Admin ta b.
Full Resolution:
The fis heye view has been scaled down to fit in the browser page. The text above the View Full R esolution button shows the full s ize of this view. S elect
th
is button to see the view at its full res olution. A new browser window will be
opened.
Image Controls:
The view can be adjus ted using the image controls. S elect the Defaults
button to return the s liders to their de fa ult s e ttings . F urther adjustme nts are available on the Image tab.
33
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
11.2 Image tab
The Ima ge tab includes lighting and orientation controls for the entire sens or.
11.2.1 Sharpen setting
Sharpen
:
C an increase or decrease the apparent clarity and focus of an
image, but may also emphasize noise.
11.2.2 EV Compensation setting
EV Compensation
: Can increase or decrease the image exposure. This
s hould be ad jus te d to s uit the lighting c onditions .
11.2.3 Wide Dynamic Range setting
Wide Dynamic Range:
This inc rea s es the d ynamic range in difficult lighting
c onditions . It will lighten da rk areas without over brightening light area s .
WDR Level:
This slider is only available when WDR is e nabled a nd a djus ts
the a mount of W D R proc e s s ing tha t is applied to the ima ge .
34
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
11.2.4 Image Time/date overlay
Image date and time:
The current date and time can be overlaid onto the
image outside of the fisheye circle so that the video is not obscured. These will appear small when viewed using a web browser because the image has been scaled down. Settings are available to set the format of the date and time text.
11.2.5 Camera Mount setting
Camera mount position:
Onc am G randeye 360 degree IP c ameras are
mounted either vertically or horizontally, most often on a wall or ceiling. When
the c a mera is rec oded and viewed us ing the Oncam Grandeye S DK which has been integrated into your NVR produc t, this s etting e ns ures tha t the sc ene is properly de-warped and the NVR P TZ operations work correctly. It should be set to match the installation position of your camera.
When a camera is mounted on a wall it may need to be mounted upside down to help with routing the cabling. When the Wall Mount option is selected on the web page, an additional invert option is available to invert the video image if the camera is mounted up-side down. This only inverts the video image when the Wall mount setting is selected.
35
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
11.3 Admin tab
11.3.1 Network Settings
The camera is configured for DHC P by default and can be detected by the Camera Configuration Tool. If DHCP fails , the c a me ra is c onfigured w ith the configure d s ta tic IP a ddres s . T he default port for c onnecting to the we b server is port 80. If the port number is changed, it will be applied regardles s of whether a DHC P or Static IP address is being us e d.
Use the C amera Configuration Tool to locate the camera. If the camera did not receive a DHC P IP addres s and is not on a reac ha ble s ubnet, then you mus t ass ign a s tatic IP addres s us ing the C amera C onfiguration Tool. In the C amera C onfiguration Tool, the camera will be listed s howing the C amera Name as entered in this screen.
An NTP S erver can optionally be used to provide accurate time services to the camera. If you are using a Network Time Protocol server, enter the DNS name or IP address of the NTP S erver here.
! You must click Apply IP Settings in order to save any chan ges. ! You may lose your connection to the Web interface if the IP address changes to another subnet!
36
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
11.3.2 User Management Settings
Enter a User Name and Password for each user. There are three levels that us ers can belong to, as follows:
User:
This level can view image s treams and view c amera
c onfigura tion.
Operator: T his level has the ability to c hange and save image
s ettings , IP settings , motion regions , alarm s ettings a nd a fac tory reset.
Administrator: This level has access to all functions, inc luding
c onfiguring us ers .
11.3.3 Alarm settings
Alarm Duration: This is the le ngth of time tha t a n a la rm will pe rsis t a fter being triggered. View Triggers:
Firs tly you will nee d to configure the A c tive T riggers lis t. T his is a lis t of triggers that will activate an alarm. Select the
View T riggers button to do this .
37
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Add New Trigger: Selec t a trigger type from the drop down lis t a nd his button s e lect the Add N e w Trigger butto n to
ad d anothe r trigger to the Active T riggers lis t.
Available triggers are:
Motion detection - -- Movement detected in a defined region Hardware input - -- A s ens or or button a tta c hed to hardw are I/O interfa c e
Us e the Dele te butto n to delete a trigger from the lis t
View Actions:
After you have configured the active triggers list, you need to configure the active actions lis t. These actions are
completed after a trigger has a c tivate d. S elec t the View Actions button to do this .
S ome actions may have configurable options that need to be set up for these actions to work. For example, to send an email in response to an alarm, the email settings need to be set up. S elect the action in the Active Actions list to configure the s e ttings .
Available actions are:
Email (SMTP) - -- One or more emails are sent. Note: R equires an internal email server FTP - -- Images are sent to an FTP server Hardware output - -- A hardware device attached to the hardware I/O is activated.
Us e the Dele te butto n to delete a trigger from the lis t
38
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
For example, to set up E-mail as an action, enter the s erver name, port, and login credentials for an S MT P s erver. Press the Test button and check your Inbox to see if an email was succ essfully sent. Now enter the S ubject and additional information for images coming from the camera. The camera will s tart sending ima ges for a period spec ified by the Alarm Duration.
The settings for FTP actions are similar, except you will be providing a path to an FTP s erver and the credentials nee ded to log into it.
39
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
11.3.4 Camera Settings
Select Camera Type, R esolution and Stream type to ac c e s s the s ettings for that camera .
FPS: Number of frames per second sent by the camera. A value of 0 means the frame rate is unlimited.
Qua lity: The quality of the J PEG images.
Max FP S : Number of frames per second sent by the camera. A value of 0 means the frame rate is unlimited.
40
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
R ate C ontrol: The method us ed to c ontrol the network ba ndwidth used.
C apped C ons ta nt B itrate The network bandwidth should not go above the B it R ate value.
Ave rage C ons ta nt B itrate T he network bandwidth may go above the B it R a te value but the
overall average will be less than the bit rate.
R ate C ontrol O ff No network bandwidth c ontrol is us ed. W hen this option is s elected
a Quality value may be selected instead of a B it R ate.
G OP L ength: T his is an advanced feature and sets the number of frames in a Group of P ictures (GOP). This is the
number of frames between Intra frames or Key frames in the video stream. A small value means more frequent K ey frames which may be required if the output is being recorded. K ey frames use more bits to encode so more frequent Key frames will increase the bit rate and hence storage required to store the video. A value of 0 means this value is set automatically by the ca mera.
11.3.5 Clock settings
Clock functions
E nte r the R egion and Zone and set the C amera Time Zone. Then enter the c urrent date and time using 24-hour time format. You can upda te the camera time directly from the PC or from the settings on this screen.
11.3.6 Stream Settings – Multi stream feature enable
The camera module can support either one or two camera streams.
41
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Select the desired video resolution for the Main C amera (stream 1) and the s tream type (MJ P E G or H . 2 6 4 ) a nd a second c amera s tream (stream 2) if required. Select the S et V ideoS tream button to s e t configure these s ettings. After changing your stream configuration, you will need to wait a few sec onds for the camera to update the settings.
The c amera module does not allow both the main camera and s e c ond camera streams to be se t to MJ P E G at the same time. T he c amera module also does not allow both streams to have the same settings, because each stream can ha ve multiple conc urrent connections and therefore there is no need for two s tre a ms to be the s ame.
When the s ec ond camera (s tream 2) is enabled, then the maximum frame rate pos s ible for eac h s tream is reduced. You s hould only enable the s econd c amera (stream 2) if it is required .
When only the main camera (stream 1) is enabled, the maximum frame rates are listed in the following table.
Main Camera (stream 1)
H.264 MJPEG
4M
2M
1M
0.25M
4M
2M
1M
0.25M
10fps 15 fps 15 fps 15 fps 10 fps 15 fps 15fps 15 fps
When both the main camera (stream 1) and the second camera (stream 2) are enabled, the maximum frame rates are listed in the following table.
Main Stream (stream 1)
H.264 MJPEG
4M
2M
1M
0.25M
4M
2M
1M
0.25M
Second Camera
(stream 2)
H.264
4M
6 fps 9 fps 10 fps 7 fps 6 fps 9 fps 10 fps
2M
6 fps 10 fps 15 fps 6 fps 13 fps 10 fps 15 fps
1M
9 fps 10 fps 15 fps 9 fps 10 fps 15 fps 15 fps
0.25M
10 fps 15 fps 15 fps 10 fps 15 fps 15 fps 15 fps
MJPEG
4M
7 fps 6 fps 9 fps 10 fps
2M
6 fps 13 fps 10 fps 15 fps
1M
9 fps
10 fps
15 fps
15 fps
0.25M
10 fps
15 fps
15 fps
15 fps
42
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
11.3.7 Audio settings
There is an audio button under the admin tab which can be used to access the audio configuration page.
The audio page contains two controls:-
• Enable Audio
• Audio Input Gain
The Enable Audio control enables the audio feature on the camera and the Audio Input Gain control allows adjustment of gain applied to the microphone signal.
You will need to provide an electret mic rophone and c onne c t it to the mic rophone input s oc ket on the c amera module. When the Audio is enabled you should s et the Audio Input Gain to the desired le ve l. The Audio w ill the n b e included in any H. 264 or MJ P E G R T S P stream from the camera.
43
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Note: R TSP streaming occurs when the s tream reques t UR L uses the prefix rtsp://. It is not possible to stream the MJ PEG 4M pixel camera s tream using RTS P . The HTTP strea ming method is a va ila b le but this does not inc lude audio.
With audio enabled, when an RTSP connection is made to the camera to view video, an additional mono audio channel will be streamed to the player. The audio uses the G.711 mu-law codec. The audio operates with both H.264 and MJPEG video streams.
Note that video is not available over RTSP for a 4M pixel MJPEG video stream. MJPEG video of this size can only be streamed via HTTP.
11.3.8 Factory Defaults
A factory reset can be achieved in three ways
1. Factory Reset Button – Physical Button
Using the external recessed reset button on the s ide of the camera module by using a ball point pen. Whils t the ca mera is powered up, press and hold the Fac tory D efault res et button for 3 seconds on the s ide of the camera module. W hen the camera ha s res tarted, a ll the c a me ra s ettings will be res et to fa c tory s ettings , see below.
2. On screen ‘Factory Default’ button – Software Button
Via the camera’s webpage ‘Admin’ screen, click the FAC TOR Y DEFAULTS reset button on screen
A warning message will pop up on screen.
3. Remote ‘Factory Default’ reset via the Oncam Grandeye camera configuration tool (software)
Via the camera configuration tool, tick the camera(s) that are required to be factory default reset. Under the c amera configuration tab, in the send c ommand to c amera type
' fa c toryres et. cgi'
click the ' S end' button.
T o c omplete the fac tory default res et, c lic k on the ' R eboot' button to reboot the c a mera. O nly a fte r the c amera has rebooted will the camera res et ba c k to factory defa ults .
A message will appear on the screen after the 'S end' request and the ' R eboot' request has been actioned.
44
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
If you proceed, the following defaults s ettings will reset to:
DHC P is enabled
Default s ta tic addres s 192.168.0.200
No regions (Priva c y & M o tion)
Alarm settings cleared.
Ima ge s ettings s et bac k to defa ult va lue s .
Default Us er Name: admin Default Pas sword: admin (case sensitive)
! You may lose your connection to the Web interface if the IP address changes to another subnet!
45
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
11.4 Privacy tab
1. G ive the R egion a Name
2. C lick on S tart under Dra wing
3. Left c lic k to s et your initial point, then c lic k aga in s evera l times until you ha ve d efined a polygon
4. Press the Save to store thes e s ettings Notes:
o Privacy Regions are enabled when created. You may dis able them by un-c hec king E nable R egions. o Each region can be turned on or off by s elec ting the In U s e chec k box. o If a region is no longe r required, then you can c lear the region. This will also delete any saved name and
return the specific region number to default settings.
46
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
11.5 Motion Detection tab
Motion detection will only operate when the camera is in H.264 mode. C lick on a rectangular region to toggle the setting between enabled and disabled. When a rectangle outline is green then this region is enabled for motion detection in H.264 mode.
The Alarm Settings page be used to configure detected motion as an alarm trigger which activates an alarm action.
The s ens itivity ma y be c hange d. Ava ila ble s ettings a re L o w, Medium, H igh o r a C us to m s etting.
47
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
12 Connecting directly to the Camera streams
12.1 JPEG snapshot image
You can also access JPEG images from the Evolution using the following URL from your internet browser
Snap shot JPEG images in a browser
4MP JPEG snapshot : http://
camera_ip_address:port_number
/mjpg/snapshot.cgi?camera=13
2MP JPEG snapshot : http://
camera_ip_address:port_number
/mjpg/snapshot.cgi?camera=25
1MP JPEG snapshot : http://
camera_ip_address:port_number
/mjpg/snapshot.cgi?camera=12
¼ JPEG snapshot : http://
camera_ip_address:port_number
/mjpg/snapshot.cgi?camera=26
12.2 MJPEG / H.264 video streaming via media player
In order to connect to the video stream via your media streaming player, you will first need to select the appropriate camera stream as described in Section
11.3.4 Camera Settings and Section 11.3.6 Camera stream settings,
then use the appropriate URL below to stream via your media player.
MJPEG video streaming
4MP MJPEG video stream : http://
camera_ip_address:port_number
/video.cgi?camera=13
2MP MJPEG video stream : http://
camera_ip_address:port_number
/video.cgi?camera=25
1MP MJPEG video stream : http://
camera_ip_address:port_number
/video.cgi?camera=12
¼ MJPEG video stream : http://
camera_ip_address:port_number
/video.cgi?camera=26
H.264 video streaming
4MP H.264 video stream : rtsp://
camera_ip_address:554
/h264/video.sdp?camera=13
2MP H.264 video stream : rtsp://
camera_ip_address:554
/h264/video.sdp?camera=25
1MP H.264 video stream : rtsp://
camera_ip_address:554
/h264/video.sdp?camera=12
¼ H.264 video stream : rtsp://
camera_ip_address:554
/h264/video.sdp?camera=26
Example, Evolution camera with the following IP address, 192.168.0.200, port 554 (Port 554 = H.264 rtsp stream)
First enable multi-stream mode and then set up the Main camera stream for 4MP H.264 and second camera stream to ¼ MP MJPEG. Using the following two URL’s, you will be able to view the two streams via your media player.
To view the 4MP H.264 video stream use rtsp://192.168.0.200:554/h264/video.sdp?camera=13
To view the ¼ MP MJPEG video stream use http://192.168.0.200:80/video.cgi?camera=26
48
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
13 Connecting via ONVIF Profile S or PSIA
13.1 Evolution Camera with a PSIA driver
To use a camera from the Evolution range you can use the PSIA Conformant Device Hardware Driver when adding the camera hardware to your NVR System. You should set the camera to the desired codec type and resolution before you add the camera.
Please note that the PSIA driver normally uses RTSP for transferring the video from the camera. The Evolution camera sends the MJPEG data using the MJPEG RTP standard RFC 2435. This standard does not cater for JPEG images with a width greater than 2040. This means RTSP cannot be used to transfer the 2144 x 1944 MJPEG video from the camera. If you wish to stream MJPEG video at 2144 x 1944 then you will need to change the streaming method used by the PSIA driver to HTTP Multipart streaming. This can be found under the settings tab when the PSIA camera device is selected.
13.2 Evolution Camera with an ONVIF Profile S driver
To use a camera from the Evolution range you can use the ONVIF Conformant Device Hardware Driver when adding the camera hardware to your NVR System. You should set the camera to the desired codec type and resolution before you add the camera to your NVR system.
Please note that the ONVIF driver uses RTSP for transferring the video from the camera. The Evolution camera sends the MJPEG data using the MJPEG RTP standard RFC 2435. This standard does not cater for JPEG images with a width greater than 2040. This means RTSP cannot be used to transfer the 2144 x 1944 MJPEG video from the camera. Any other MJPEG resolution or any H.264 resolution may be streamed using the ONVIF driver.
14 Troubleshooting and Technical Support
If your camera installation is not behaving as expected, use the following checklist to ensure that all components of the system are working properly.
• Web interface not available in browser: Use the IP Configuration Tool to confirm that you are looking at
the correct address and there are no IP address conflicts. Also check your own network settings to make sure that the camera is on the same sub‐LAN or is accessibly by routing.
• Web interface fails to show a live image: Check your browser security settings.
• Motion detection is not working properly: There must be at least one motion detection region defined
and In Use. On the Motion Detection panel, the VMD mode must be set to Motion Detection. Check the size and sensitivity controls to ensure that movement is detected.
• Camera image stops or drops frames: This is probably due to a network connectivity problem, especially
for cameras connected to wireless networks or the public Internet. Try reducing the JPEG quality or resolution settings in the camera Web interface.
• One portion of the image is over or under‐exposed: Set the Brightness or try using an EV setting which
will add ‘over exposure’ or ‘under exposure’ to the light in the scene.
• There is a bright area in the scene and no detail can be seen with in it, but there is also dark areas in
the scene and no detail can be seen here either: Enable the WDR feature. This will make the dark areas brighter but will not affect the bright areas. Then by adjusting the EV settings so the bright areas are be under exposed and the dark areas will now be over exposed. Depending on the light differences the WDR settings can be adjusted so to obtain the best image.
49
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
14.1 Contact Technical Support
If none of these recommendations solve your problem, please send an email to support@oncamgrandeye.com Include a detailed description of the problem, the model number of the cameras you are using and any relevant configuration information.
50
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
15 Copyright and Legal Notices
ONCAM GLOBAL GROUP END‐USER LICENSE AGREEMENT NOTICE TO USER: PLEASE READ YOUR APPLICABLE END‐USER SOFTWARE LICENSE AGREEMENT (“EULA”) CAREFULLY BEFORE INSTALLING THE SOFTWARE AS IT IMPACTS YOUR LEGAL RIGHTS AND REMEDIES PERTAINING TO THE USE OF THE SOFTWARE. PLEASE CONTACT ONCAM GLOBAL GROUP FOR A COPY OF YOUR APPLICABLE LICENSE.
By copying, installing or using all or any portion of the software you accept all the terms and conditions of the EULA and any amendments thereto, including, but not limited to, the limitations on use set forth in Article 2; transferability in Article 4; warranty in Articles 6 and 7; liability in Article 8; connectivity and privacy in Section 14; and specific provisions and exceptions in Article 15. You agree that the EULA is like any written negotiated instrument signed by you. The EULA is enforceable against you and any legal entity that obtained the software and on whose behalf it is used; for example, if applicable, your employer. Do not use or install the software if you do not agree to the terms of this license.
Please contact Oncam Grandeye for terms of and limitations on returning the software for a refund. Oncam Grandeye and its suppliers own or license all intellectual property in the software. The software is licensed, not sold. Oncam Grandeye permits you to copy, download, install, use, or otherwise benefit from the functionality or intellectual property of the software only in accordance with the terms of the EULA and any amendments thereto. Use of some Oncam Grandeye and some third party materials and other services included in or accessed through the software may be subject to other terms and conditions typically found in a separate license agreement. The software may include product activation and other technology designed to prevent unauthorized use and copying. This technology may cause your computer to automatically connect to the Internet and may prevent uses of the software that are not permitted
51
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
16 Appendix A - Technical Specifications
The following pages contain the technical specifications for the Evolution range of cameras.
52
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Evolution Indoor Camera
Model
EVO-05NID (White enclosure)
EVO-05NJD
(Black enclosure)
General
Field of View 360°
Image Sensor 5 megapixel; Array Format (Active) 2592H x 1944V = 5,038,848 pixels; 1/2.5-Inch CMOS Sensor
Angle of View 180° hemisphere
Lens 185° 1.6mm / F2.0
Minimum Illumination 0.2 lux = 50 IRE F/2.0 (6500K)
Frame Rate 10 fps typical at maximum resolution and up to 15 fps for all other resolutions
Video Motion Detection 12 regions of interest; VMD; configurable response; adjustable characteristics
External Input 1x contact input
External Output 1x contact output
Security Configurable password protection
Advanced Event Management
Triggered by motion, external input or HTTP event, Result configurable; external output, FTP/SMTP upload,
(Local recording, future feature via firmware update)
Networking TCP/IP, HTTP, DHCP, DNS, NTP, FTP, SMTP, RSTP
Privacy 10 configurable privacy regions
SD Card Built-in SD Card slot (future feature via firmware update)
Audio Connections Audio in; Microphone input via 3.5mm jack; via RTSP using G711 codec (µLaw - 8K sample rate), via ONVIF S
Analogue Video Out BNC connection – selectable between PAL or NTSC
Signal-to-Noise Ratio 45dB
White Balance Range Auto White Balance (Range = approx. 2500K~8000K)
Electrical
Ports RJ45 for 100Base-TX; 2.1mm DC Input jack; 6-pin 1.5mm Phoenix for external I/O, BNC for test video output
Network Cable Type CAT5 or better for 100Base-TX
Power Input 12V, 1.0A (min) “LPS or NEC Class 2” power supply or Power over Ethernet (PoE), IEEE standard 802.3af
Power Consumption 8W max
Video
Video Stream 1 & 2 Codec’s H.264 High, Level 5 / MJPEG (both streams configurable)
Video Stream 1 & 2 Compression Level Multi-levels of compression adjustment
Video Stream 1 & 2 Pixel Resolution Fisheyes at: ¼ MegaPixel (528x480), 1Mp (1056x960) , 2Mp (1488x1360), 4Mp (2144x1944)
Video Stream 3 Codec
MJPEG
Video Stream 3 Multi-levels of compression and frame rate adjustment (max 15 fps)
Video Stream 3 Pixel Resolution Fisheye at: ¼ Megapixel (528x480)
Image Control Settings: brightness/contrast/saturation/exposure compensation; compression quality; wall/ceiling/table mount
Image Enhancement Wide Dynamic range - Greater than 90db
VMS / NVR / HDVR supported Most major VMS / VMS / HDVR systems (contact Oncam Sales for latest list)
53
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Web Browser Compatibility Internet Explorer IE9 (with ActiveX plug-in, supplied); Firefox 23 ; Chrome 29; using Quicktime, minimum version 7
Number of Unicast Users Supported Up to 20 simultaneous users depending on the resolutions settings
Bit Rate Control Selectable options: constant bit rate control; capped bit rate control; constant quality control
Minimum system requirements
Processor and Memory Computer with 1Ghz 32-bit (x86) or 64-bit (x64) processor and with minimum of 512 MB
Operating System Windows Vista 32-bit with service pack 2 (SP2) of higher / 64-bit with service pack (SP2) of higher
Hard Drive Space Windows Vista 32-bit = minimum 70MB / Windows Vista 64-bit = minimum 120MB
Display Super VGA (800 x 600) of higher-resolution monitor with 256 colours
Peripherals 100Mbits or greater network connection, mouse or compatible pointing device, keyboard
Mechanical
Camera Mount
Surface mount (or with a ranger of mounting accessories for mounting to a pole / wall / pedant)
Weight
0.58kg (1.08lbs)
Enclosure
Metal back plate with polycarbonate dome bubble and cover trim enclosure
Environmental
Operating Temperature Range
-40 to +55°C (-40 to +131°F)
Storage temperature range
-40 to +70°C (-40 to +158°F)
Operating Humidity
Up to 98% (In accordance with BS EN 60068-2-30)
Ingress Protection rating
IP54-rated – Indoor use only
Certifications / Ratings / Patents
Patents
15 patents; 15 patents pending; 20 licensed patents
Approvals
IEEE802.3af Class 2; EMC: (CISPR Class A) FCC; CE; ICES-003; Safety: UL60950
Other related products
Oncam Grandeye SDK integration pack, Evolution Accessories, IP Configuration Tool, 360-degree Viewer, OnVu360
54
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Evolution Indoor Concealed Camera
Model
EVO-05NCD
General
Field of View
360°
Image Sensor
5 megapixel; Array Format (Active) 2592H x 1944V = 5,038,848 pixels; 1/2.5-Inch CMOS Sensor
Angle of View
180° hemisphere
Lens
185° 1.6mm / F2.0
Minimum Illumination
0.2 lux = 50 IRE F/2.0
Frame Rate
10 fps typical at maximum resolution and up to 15 fps for all other resolutions
Video Motion Detection
12 regions of interest; VMD; configurable response; adjustable characteristics
External Input
1x contact input
External Output
1x contact output
Security
Configurable password protection
Advanced Event Management
Triggered by motion, external input or HTTP event, result configurable; external output, FTP/SMTP upload,
(Local recording, future feature via firmware update)
Networking / Supported IP Protocol
TCP/IP, HTTP, DHCP, DNS, NTP, FTP, SMTP, RSTP
Privacy
10 configurable privacy regions
SD Card
Built-in SD Card slot (future feature via firmware update)
Audio Connections
Audio in; Microphone input via 3.5mm jack; via RTSP using G711 codec (µLaw - 8K sample rate), via ONVIF S
Analogue Video Out
BNC connection – selectable between PAL or NTSC
Signal-to-Noise Ratio
45dB
White Balance Range
Auto White Balance (Range = approx. 2500K~8000K)
Electrical
Ports
RJ45 for 100Base-TX; 2.1mm DC Input jack; 6-pin 1.5mm Phoenix for external I/O, BNC for test video output
Network Cable Type
CAT5 or better for 100Base-TX
Power Input
12V, 1.0A (min) “LPS or NEC Class 2” power supply or Power over Ethernet (PoE), IEEE standard 802.3af
Power Consumption
8W max
Video
Video Stream 1 & 2 Codec’s
H.264 High, Level 5 / MJPEG (both streams configurable)
Video Stream 1 & 2 Compression Level
Multi-levels of compression adjustment
Video Stream 1 & 2 Pixel Resolution
Fisheyes at: ¼ MegaPixel (528x480), 1Mp (1056x960) , 2Mp (1488x1360), 4Mp (2144x1944)
Video Stream 3 Codec
MJPEG
Video Stream 3
Multi-levels of compression and frame rate adjustment (max 15fps)
Video Stream 3 Pixel Resolution
Fisheye at: ¼ Megapixel (528x480)
Image Control
Settings: brightness/contrast/saturation/exposure compensation; compression quality; wall/ceiling/table mount
Image Enhancement
Wide Dynamic range - Greater than 90db
VMS / NVR / HDVR Supported
Most major VMS / VMS / HDVR systems (contact Oncam Sales for latest list)
55
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Web Browser Compatibility
Internet Explorer IE9 (with ActiveX plug-in, supplied); Firefox 23 ; Chrome 29; using Quicktime, minimum version 7
Number of Unicast Users Supported
Up to 20 simultaneous users depending on the resolutions settings
Bit Rate Control
Selectable options: constant bit rate control; capped bit rate control; constant quality control
Minimum system requirements
Processor and Memory
Computer with 1Ghz 32-bit (x86) or 64-bit (x64) processor and with minimum of 512 MB
Operating System
Windows Vista 32-bit with service pack 2 (SP2) of higher / 64-bit with service pack (SP2) of higher
Hard Drive Space
Windows Vista 32-bit = minimum 70MB / Windows Vista 64-bit = minimum 120MB
Display
Super VGA (800 x 600) of higher-resolution monitor with 256 colours
Peripherals
100Mbits or greater network connection, mouse or compatible pointing device, keyboard
Mechanical
Camera Mount
Behind ceiling or wall to conceal the camera module from view via flush mounted adaptor ring
Weight
0.45kg (0.95lbs)
Enclosure
Die-cast aluminium camera module with polycarbonate mounting adaptor and clamping ring
Cut out Required
Diameter cut out; 64mm (2 ½”), Max / Min ceiling or wall material thickness; 3mm (1/4”) – 25mm (1”)
Environmental
Operating temperature range
-40 to +55°C (-40 to +131°F)
Storage temperature range
-40 to +70°C (-40 to +158°F)
Operating Humidity
Up to 98% (In accordance with BS EN 60068-2-30)
Certifications / Ratings / Patents
Patents
15 patents; 15 patents pending; 20 licensed patents
Approvals
IEEE802.3af Class 2; EMC: (CISPR Class A) FCC; CE; ICES-003; Safety: UL60950
Other related products
Oncam Grandeye SDK integration pack, Evolution Accessories, IP Configuration Tool, 360-degree Viewer, OnVu360
56
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Evolution Outdoor Dome Camera
Model
EVO-05NMD
(White enclosure)
EVO-05NND
(Black enclosure)
General
Field of View
360°
Image Sensor
5 megapixel; Array Format (Active) 2592H x 1944V = 5,038,848 pixels; 1/2.5-Inch CMOS Sensor
Angle of View
180° hemisphere
Lens
185° 1.6mm / F2.0
Minimum Illumination
0.2 lux = 50 IRE F/2.0 (6500k)
Frame Rate
10 fps typical at maximum resolution and up to 15 fps for all other resolutions
Video Motion Detection 12 regions of interest; VMD; configurable response; adjustable characteristics
External Input
1x contact input
External Output
1x contact output
Security
Configurable password protection
Advanced Event Management
Triggered by motion, external input or HTTP event, Result configurable; external output, FTP/SMTP upload,
(Local recording, future feature via firmware update)
Networking
TCP/IP, HTTP, DHCP, DNS, NTP, FTP, SMTP, RSTP
Privacy
10 configurable privacy regions
SD Card
Built-in SD Card slot (future feature via firmware update)
Audio Connections
Audio in; Microphone input via 3.5mm jack; via RTSP using G711 codec (µLaw - 8K sample rate), via ONVIF S
Analogue Video Out
BNC connection – selectable between PAL or NTSC
Signal-to-Noise Ratio
45dB
White Balance Range
Auto White Balance (Range = approx. 2500K~8000K)
Electrical
Ports RJ45 for 100Base-TX; 2.1mm DC Input jack; 6-pin 1.5mm Phoenix for external I/O, BNC for test video output
Network Cable Type
CAT5 or better for 100Base-TX
Power Input
12V, 1.0A (min) “LPS or NEC Class 2” power supply or Power over Ethernet (PoE), IEEE standard 802.3af
Power Consumption
8W max
Video
Video Stream 1 & 2 Codec’s
H.264 High, Level 5 / MJPEG (both streams configurable)
Video Stream 1 & 2 Compression Level
Multi-levels of compression adjustment
Video Stream 1 & 2 Pixel Resolution
Fisheyes at: ¼ MegaPixel (528x480), 1Mp (1056x960) , 2Mp (1488x1360), 4Mp (2144x1944)
Video Stream 3 Codec
MJPEG
Video Stream 3
Multi-levels of compression and frame rate adjustment (max 15 fps)
Video Stream 3 Pixel Resolution
Fisheye at: ¼ Megapixel (528x480)
Image Control
Settings: brightness/contrast/saturation/exposure compensation; compression quality; wall/ceiling/table mount
Image Enhancement
Wide Dynamic range - Greater than 90db
VMS / NVR / HDVR Supported
Most major VMS / VMS / HDVR systems (contact Oncam Sales for latest list)
Web Browser Compatibility
Internet Explorer IE9 (with ActiveX plug-in, supplied); Firefox 23 ; Chrome 29; using Quicktime, minimum version 7
Number of Unicast Users Supported
Up to 20 simultaneous users depending on the resolutions settings
57
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
Bit Rate Control
Selectable options: constant bit rate control; capped bit rate control; constant quality control
Minimum system requirements
Processor and Memory
Computer with 1Ghz 32-bit (x86) or 64-bit (x64) processor and with minimum of 512 MB
Operating System
Windows Vista 32-bit with service pack 2 (SP2) of higher / 64-bit with service pack (SP2) of higher
Hard Drive Space
Windows Vista 32-bit = minimum 70MB / Windows Vista 64-bit = minimum 120MB
Display
Super VGA (800 x 600) of higher-resolution monitor with 256 colours
Peripherals
100Mbits or greater network connection, mouse or compatible pointing device, keyboard
Mechanical
Camera Mount
Surface mount (or with a ranger of mounting accessories for mounting to a pole / wall / pedant)
Weight
0.92kg (2.03lbs)
Enclosure
All-aluminium die-cast base enclosure with clear polycarbonate dome bubble and cover trim plate
Environmental
Operating Temperature Range
-40 to +55°C (-40 to +131°F)
Storage Temperature Range
-40 to +70°C (-40 to +158°F)
Operating Humidity
Up to 98% (In accordance with BS EN 60068-2-30)
Ingress Protection Rating
IP66-rated
Certifications / Ratings / Patents
Patents
15 patents; 15 patents pending; 20 licensed patents
Approvals
IEEE802.3af Class 2; EMC: (CISPR Class A) FCC; CE; ICES-003; Safety: UL60950
Other Related Products
Oncam Grandeye SDK integration pack, Evolution Accessories, IP Configuration Tool, 360-degree Viewer, OnVu360
58
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
17 Appendix B – Frame Rate, Resolution & Storage Needs
C
Default Settings
H.264
4MP (2144x1944) 10fps Constant bit rate settings 5 Mbits/s 24hrs = 54GB *
2MP (1488 x1360) 15fps Constant bit rate settings 3 Mbits/s 24hrs = 40GB *
1MP (1056 x 1056) 15fps Constant bit rate settings 1.5 Mbits/s 24hrs = 16GB *
1/4MP (528 x 480) 15fps Constant bit rate settings 0.8 Mbits/s 24hrs= 8GB *
* Based on the same scene, with constant average light conditions
MJPEG
4MP (2144x1944) 10fps Average file size 640KB Average bit rate 52.4 Mbits/s 24hrs = 552.96 GB *
2MP (1488 x1360) 15fps Average file size 350KB Average bit rate 43.0 Mbits/s 24hrs = 453.60 GB *
1MP (1056 x 1056) 15fps Average file size 188KB Average bit rate 23.1 Mbits/s 24hrs = 243.65 GB *
1/4MP (528 x 480) 15fps Average file size 62KB Average bit rate 7.6 Mbits/s 24hrs = 80.35 GB *
* Based on the same scene, with constant average light conditions
Notes:
Values for frame rate, size, and bandwidth are approximate and are influenced by compression, quality settings, number of simultaneous viewers, and the amount of detail and movement in a scene.
Additional CGI commands are available. Software developers who need access to the full API interface should contact support@oncamgrandeye.com for additional details.
18 Appendix C – NVR and Storage Partners
For an up to date list of NVR / VMS partners that support the Oncam Grandeye 360° IP cameras, please visit the Oncam Grandeye web site
www.oncamgrandeye.com
59
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
19 Appendix D – Drill Template, Evolution Outdoor Dome Camera
– UK
Drill Template, ‘A4’ format (UK / Europe)
The following pages are the drilling template for installing the Evolution Outdoor mini dome. It must be printed as is, with no resizing, so that the proper drilling measurements are maintained.
If in doubt, check the measurements of your printed template before drilling.
Scale 1:1 when print
as Euro ‘A4’ format
size
60
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
20 Appendix E – Drill Template, Evolution Outdoor Dome Camera
– USA
Drilling Template, ‘A’ format (USA)
The following pages are the drilling template for installing the Evolution Outdoor mini dome. It must be printed as is, with no resizing, so that the proper drilling measurements are maintained.
If in doubt, check the measurements of your printed template before drilling.
Scale 1:1 when
printed as
USA ‘A’ format size
61
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
21 Appendix F – Drill Template, Evolution Indoor Camera – UK
Drilling Template, ‘A4’ format (UK / Europe)
The following page is the drilling template for installing the Evolution Outdoor mini dome. It must be printed as is, with no resizing, so that the proper drilling measurements are maintained.
If in doubt, check the measurements of your printed template before drilling.
Scale 1:1 when print
as Euro ‘A4’ format
size
62
Installation & Operation Guide: Oncam Grandeye 360o Evolution Camera Range
22 Appendix G – Drill Template, Evolution Indoor Camera - USA
Drilling Template, ‘A’ format (USA)
The following page is the drilling template for installing the Evolution Outdoor mini dome. It must be printed as is, with no resizing, so that the proper drilling measurements are maintained.
If in doubt, check the measurements of your printed template before drilling.
Scale 1:1 when
printed as
USA ‘A’ format size
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use