SHANGHAI ONBON TECHNOLOGY CO.,LTD
YQ Remote Controller User
Manual
2015-12-4
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 1 -
Copyright
All rights reserved. No part of this publication may be reproduced in any form by print, photo print,
microfilm or any other means without written permission by ONBON.
© 2010-2014 Onbon
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 2 -
版本号
日期
作者
描述
1.0
2015-12-4
陈敏
异步全彩遥控器的具体使用方法
版本历史:
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 3 -
Contents
1. Remote Control Effect .............................................................................................................. 4
2. Preparation ............................................................................................................................... 7
3. Operation ................................................................................................................................. 8
3.1 Hardware connection .................................................................................................... 8
3.2 Remote controller user manual .................................................................................... 8
3.2.1 Power on/off ...................................................................................................... 8
3.2.2 Setup the brightness ......................................................................................... 9
3.2.3 Setup Voice ..................................................................................................... 10
3.2.4 Controller information ...................................................................................... 10
3.2.5 Display Locked Program ................................................................................. 11
3.2.6 Switch program ............................................................................................... 12
3.2.7 Test function .................................................................................................... 12
3.2.8 Menu function .................................................................................................. 13
4. FAQ ........................................................................................................................................ 17
4.1.1 Insensitive remote controller ........................................................................... 17
5. Contact Us ............................................................................................................................. 18
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 4 -
YQ Remote Controller User Manual
1. Remote Control Effect
Seems like the TV remote, very easy to operate. Now is available for YQ1、YQ1-75、YQ2、
YQ2E、YQ3、YQ4.our Remote controller can support switch program, adjust the voice, lock
program, unlock the program ,adjust the brightness, set up the IP function. And so on, pls check
the -1 picture.(Tips: Users should set the screen size as :128(width)*96(height),so the program
can fully display.
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 5 -
Item
Button name
Function
Remark
1
Standby
Power on/off for the LED controller
2 Sound off
Sound off/on
The function description：
Sheet 1
- 1
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 6 -
3
Request
program
Display the menu interface, click again to
adjust the interface location
Due to different
controller configuration,
make sure to see all the
menu interface by
adjust the menu
interface
4
Menu
Display/close menu interface
5
Application
Run in the testing mode
6,9
▲▼
Brightness increase/reduce
7,8
◄►
Brightness /voice (increase/reduce
rapidly)
10
OK
Display current program situation and
program item
program lock is
program take
turns ， minimum
program item is 1
11
Turn back
Lock /unlock the current program
12
Information
Display the controller information
13
Voice +/-
Voice increase/reduce
14
Channel +/-
Lock last/next program
15
Number key
Input number
when set the interface,
number key function is
input the number
when display the
program interface,
number key function is
lock program
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 7 -
2. Preparation
Before use the remote controller ,pls prepare the below:YQ card ,network cable, receiving
card ,LED screen, infrared receiving port, remote controller ,5V power
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 8 -
3. Operation
3.1 Hardware connection
Connect infrared receiving port to the controller and connect the 5V power as in picture -2
Picture- 2
After connect the receiving card, receiving card connect the LED display screen and display
well in the screen.
3.2 Remote controller user manual
3.2.1 Power on/off
Press the button to switch the controller .when power off will stop to display program and
screen will be black. Check picture -3
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 9 -
Picture-4
Picture- 3
3.2.2 Setup the brightness
▲▼button is for setting the brightness, step length is 1,when show the ICON ,◄► can
make rapidly adjust the brightness. step length is 10, maximum brightness is 255.minimum is 20
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 10 -
3.2.3 Setup Voice
Voice +/ - can adjust the voice step length is 1.when display voice ICON ,◄ ► can
adjust the voice rapidly,step length is 5,maximum voice is 100%,minimum is 0%. When
display ICON .sound off can switch the last time voice setup.
Picture - 4
3.2.4 Controller information
Press “information ”to display current controller information. including the controller model,
firmware version, FPGA version. RTC situation.
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 11 -
3.2.5 Display Locked Program
Press “OK” to display the current program item and display situation, is cycle mode, is
locking the current program.”Back”is for turn back to current program, if current program
is cycle mode, press “back “to change the mode,but program should display from
program 1.
picture- 5
Picture - 7
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 12 -
3.2.6 Switch program
1.click “Channel+/-” to switch the program item rapidly, after 3s can lock the program item.
Picture - 6
2.if want to lock the program item 2, just input 002 will be ok .if 3 program on the
controller ,press button to lock program 2.
picture- 9
3.2.7 Test function
Click “application” button to test the screen. ▲▼◄► these buttons is for change the
before/next test mode,if no operation, test mode will be changed each 10s,as shown in picture
10.
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 13 -
picture- 10
3.2.8 Menu function
Use the “menu ”button to display menu selection. Due to different screen parameters ,can
click this button to adjust the menu (minimum screen parameters is 128*96)as shown in the
picture -11
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 14 -
Picture - 11
3.2.8.1 Change language
Our remote controller support Chinese and English. if users want to change language,pls
click “menu”button to change the language.
Parameter is 500x360
Picture - 12
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 15 -
Picture - 7
3.2.8.2 Setup the controller IP
except set ip by internet ,also can set ip by the remote controller ,enter into the menu ,to
select the network then press OK.
set the IP in the network by subnet mask and gate way, use the ▲▼button.
Picture - 14
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 16 -
Picture - 15
3.2.8.3 Setup the controller date
Enter into the menu, select the “date” then press OK.
Picture - 16
Press ▲▼ to modify the date.
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 17 -
4. FAQ
4.1.1 Insensitive remote controller
The remote control distance will be within 10meters,and check the battery is full or not.
文档内部编号
SHANGHAI ONBON TECHNOLOGY CO.,LTD | YQ Remote Controller User Manual
- 18 -
5. Contact Us
SHANGHAI ONBON TECHNOLOGY CO.,LTD
Add:Floor 7, Tower 88, 1199#, North Qinzhou Road, Xuhui District, Shanghai,China
Tel: 86-512-36912687 86-15921814956
Fax: 86-512-36912670
Email: onbon@onbonbx.com
Skype: yolanda_zhou2010
QQ:2463728439
whatsApp:15921814956
Website: www.onbonbx.com www.onbonbx.en.alibaba.com
Loading...