!
BX-V75 receiving card
LED Control Card
User Manual
Before you use the LED controller, please
read this file first and save it for future.
△
Statement
Any companies or privates cannot copy, transcribe or translate part or
whole content of this file without our written permission. And cannot
use it on any business or benefit filed with any forms.
The specifications and information which are mentioned on the file is
for reference only, if there’s update, we will not inform you. This file is
only for guidance, and all information will not be for any promises.
CATALOG
Brief Introduction
.....................................................................................................................................................
2
About Software
.................................................................................................................................................
2
Characteristics
...................................................................................................................................................
2
Guiding
........................................................................................................................................................................
3
Safety Note
........................................................................................................................................................
3
Function Introduction
.............................................................................................................................................
4
Simple install
.....................................................................................................................................................
4
Interface
..............................................................................................................................................................
4
Split mode
..........................................................................................................................................................
4
Data direction can be changed
....................................................................................................................
4
Support special-shaped screens
.................................................................................................................
4
Many scan modes
............................................................................................................................................
4
Compatible with many chips
........................................................................................................................
5
Better effects
.....................................................................................................................................................
5
Clock adjustment
.............................................................................................................................................
5
Blanking adjustment
.......................................................................................................................................
5
Maintenance
......................................................................................................................................................
5
Control Size
................................................................................................................................................................
6
Adjustment Guiding
................................................................................................................................................
7
Choose Parameters
.........................................................................................................................................
7
Specification
..............................................................................................................................................................
8
Interface Photo
.........................................................................................................................................................
9
Interface Definition
................................................................................................................................................
10
Size Photo
................................................................................................................................................................
11
FAQ
.............................................................................................................................................................................
12
Brief Introduction
Simple construct; Convenient to install;
Gigabit receiving card mode, be compatible with synchronous sending card and
High refreshment; Abundant display effect; Support high refreshment and high gray scale;
Simple operations;
Support the normal chip, PWM chip, etc.
Support any scan mode in 32 scan, and support 595 serial decoding scan;
display， 12 pcs HUB75 port;
Support “configure file” read back;
Support detect on Ethernet communication;
Can be used for all kinds of full color LED screens
Thanks for choosing LED control card. The design of the control card is according to the
international and industrial standard, but if the operations are incorrect, it will probably
bring you personal injury and financial harm. As to avoid these and win more from your
equipment, please obey the specifications of this file.
About Software
Cannot do any modification, decompilation, disassembling, decoding or reverse engineering
on our software, it’s illegal.
Characteristics
asynchronous YQ player;
Guiding
Input voltage is 5V, voltage range is from 4.5V-5.5V, please make sure
Please make sure that all the power supply cables are plugged off when
Please make sure that all the power supply cables and signal cables
Please take off the power supply of LED video processor before you
Please make sure the environment is clean, dry and ventilated when
This product is electronic products, please keep away from fire, water
There’s high pressure components in this products, please do not open
Turn off the power supply immediately when you find smoking, peculiar
Safety Note
the quality of the power supply of BX-V75 series.
you want to connect or plug off any signal or controlling cables.
are plugged off when you need to put in or take off the hardware equipment.
do any hardware operations, and ESD by touching the ground.
you use this product, also, do not put this product to a high temperature
and wet environment.
source and flammable&combustible products.
the box and repair it by yourself.
smell or something unusual. And contact with us soon.
Function Introduction
BX-V75 receiving cards used for all kinds of full color LED display screen, support most of the module chip.
12nos T75 port on board, data, refresh rate can be reached to 5000Hz. Support Gigabit mode,
asynchronous player and BX-VS/VSE/VHE synchronous sending card.
online.
Simple install
Adopt the standard interface, standard hole specifications. Support connecting indicator
light and test button from outside; 2 gigabit Ethernet ports; Support exchange of input and
output. 12nos T75 on board.
Interface
12nos T75 port on board, support E signal, maximum 32 scan mode, signal outputs.
Support exchange the data from any interface, RGB colors will exchange in orders.
Users can update the firmware
Split mode
Support 2 split modes, 3 split modes and 4 split modes, for width, can be different.
Example: 2 split modes: first one is 128 pixels, another one is 64 pixels; 3 split modes: first
one is 128 pixels, middle one is 128 pixels, last one is 64 pixels.
Data direction can be changed
Default is from right to left. According to your requirements, you can set as “left to
right””top to bottom””bottom to top”.
Support special-shaped screens
Support excursion of display data ( from range 0-511 pixels). And maximum, you can set
384 in height for excursion.
Many scan modes
Use LedshowTV software, and support 32, 16, 8, 4 scan modes; Support without 138, and
support 595, RT958 etc. By smart scan function, can support static screen, 2 to 32 scan
modes.
Compatible with many chips
Support normal chip, PWM chip.
Better effects
Adopt high refreshment technology, support high refreshment and high gray scale.
Support 256, 512、1024, 2048, 4096, 8192, 16384, 32768,65536.
Used for all kinds of situations, outdoor or indoor. Users can get a good effect by adjusting
the refresh rate, display mode, etc.
Clock adjustment
Support adjustment from 10.42MHz to 31.25MHz. Satisfy cascade characteristics of
different modules, has better effect. On the promise of refresh rate, will increase the width.
Blanking adjustment
Adjust the blanking, as to adjust the virtual light.
Maintenance
Receiving card supports read back function of configuration parameters; Support update
online; It is convenient for customers to update and maintain.
Control Size
scan mode
Suggest
Maximum
The lowest refresh rate
1/32
64
128
960
1/16
128
192
960
1/864128
1440
1/464128
1920
The upon scan modes are for straight lines. If your scan mode is 1/4, one data has 8 lines,
If it is OK, you can use split mode as to improve the display effect.
Better to control the sized smaller than 256*256, you will get a good effect.
The effect is depending on the width of the screen, as to be more clear, please check the below
Note:
you should choose the data of 1/8; If your scan mode is 1/4, one data has 16 lines, you
should choose 1/16.
Adjustment Guiding
Display mode
Brightness mode
Gray grade
Refresh rate
Replacement clock
Gray from the first grade
Choose Parameters
Now, we have two modes, refreshment priority and brightness priority. Refreshment
priority is for high refresh rate, and you will get good feedback by mobile phone or camera,
but the brightness is lower. If you use brightness priority, you will get higher brightness but
photo by mobile phone or camera may not so good. Usually,for indoor screen, brightness is
not so important,so you can choose refreshment priority;But for outdoor screen,brightness
is needed,in this situation,need to choose brightness priority.
For brightness mode, there are 3 modes: lower, normal or high brightness. If the display
mode is fixed, then, the higher the brightness is, the lower the refreshment will be. Or, on
the same refreshment, the control width will be smaller. So, when the brightness is enough,
you can choose lower brightness mode, as to obtain a better refresh rate and shooting
effect.
On the same refresh rate, if the control size is the same, then, the gray grade is higher,
the effect will be better. But if the gray grade is higher, the control size will be smaller. So, we
usually suggest to use 4096 gray scale, do not over than 16384.
It is not correct that the refresh magnification is higher, the effect will be better. If the
refresh rate is enough, the refresh magnification is lower, the shoot effect will be better.
Replacement clock is also an important parameters. The higher the replacement clock is,
the control size will be larger(on the same refresh rate). But some kinds of modules are not
so good with quality, cannot use higher replacement clock, usually, there will be some
special flashing on the screen.
If users need better low gray effect, you can choose. But the effect will be not so good, it
will be weird by your eyes. So, usually, we do not suggest.
Specification
Screen index
Parameters
Specification
Minimum size
32 x 32
Control size
256*256
Total pixels
256*256
Cascade quantity
Single LAN cable cascade receiving cards≤1024
Gray grade
≤
65536
Refresh rate
Support 5000Hz, will be changed with the control width.
Screens
All kinds of full color LED screens
Chip
All main LED chip
Interface
12nos T75 , 24 RGB data
Brightness adjustment
256 grade
Details
Input power supply
4.5V~5.5V; Please make sure the quality of power supply.
Power Dissipation
≤
5W
Temperature
-40℃～80℃
Size
143.6mm91.7mm
Interface Photo
Interface
1
T75 port
T75 port（JK1, JK2, JK3, JK4, JK5, JK6, JK7, JK8,JK9,JK10,JK11,JK12）
2
TEST/SELECT
Screen Text button
3
Power supply
5V power supply port, DC input, 5V, support 4.5V~5.5V
4
1000M
Gigabit Ethernet, connect with sending card
○
1
○
4
○
3
○
1
Interface Definition
Function
Pin No
Pin No
Function
R112
G1
B134
GND
R256
G2
B278
E
A910
B
C1112
D
CK1314
HS
OE1516
GND
Size Photo
FAQ
Gigabit or Sending card
Is there any affect for shooting by environment?
If need better shoot effect, choose sending card mode.
Usually, the environment brightness is the biggest fact for shoot. Cause the time of the
camera shutter is according the the environment brightness.
In indoor, the brightness is lower, so, the shutter will be slower, usually, 1/60 - 1/200 seconds.
In this situation, if the refresh rate is about 1000, the shoot effect will be better.
But if in outside, the brightness is higher, the shutter time will be faster, usually, faster than
1/800 seconds. In this situation, the refresh rate should be about 3000.
So, for same screen, the shoot effect in night is better then in day. And that is the reason why
outdoor screen needs a higher refresh rate.
Contact Us
Shanghai ONBON Technology Co.,ltd (Headquarters)
Address: 7 Floor, Tower 88, 1199#, North Qinzhou Road, Xuhui District, Shanghai City,
China
Tel Phone: 086-21-64955136
Fax: 086-21-64955136
Website: www.onbonbx.com
ONBON (Jiangsu) Optoelectronic Industrial Co.,LTD
Address: 1299#, Fuchun Jiang Road, Kunshan City, Jiangsu Province, China
Sales Contacts
Tel: 0086-15921814956 0086-15800379719
Email: onbon@onbonbx.com
Second Development
Tel: 0512-66589212
Email: dev@onbonbx.com
iLEDCloud
Website: http://www.iledcloud.com/
Public Wechat ONBON APP
Loading...