ONAGO FLY Smart Nano Drone Quick Start Manual

Page 1

Quick Start Guide

Smart Nano Drone

Each time when you finish with ONAGOfly, please make sure to turn it off. Please do not use ONAGOfly indoor and make sure the orange propellers are always to the front side.

www.onagofly.com [email protected]

Smart Nano Drone

V1.3

ONAGOfly 1

Page 2

① ② ③ ④ ⑤

Camera Front LEDs Power button Charging port Back LEDs.

⑦ ⑧ ⑨ ⑩

Motor Memory card slot GPS antennas

Interface for manufacturer

Fly in open areas: Please always fly ONAGOfly1 in locations that are free and clear of buildings, trees, power lines and other obstacles. Do not fly above or near people or animals. Do not fly over crowds. Do not fly in winds that exceed 8-16 km/h (5-10MPH). Maintain Line of Sight: Keep your aircraft in sight at all times, and avoid flying behind buildings or other obstacles that may block your view. ONAGOfly1 is not waterproof. Please do not fly above water or on a rainy day. Age Recommendation: Not for under 18 years. Please check your ONAGOfly1 before you fly, and ensure the battery is fully charged. Do not attempt to operate your aircraft with any worn and/or damaged components, parts, etc. (including but not limited to, damaged propellers etc.) Do not try to touch or close to the ONAGOfly1 with your hand, face or other part of body while the propellers is spinning. Please do not open or disassemble the product by yourself, since unauthorized disassembly will void the product warranty and possibly cause your aircraft to not work properly. ONAGOfly1 is not compatible with any other product or component, which may result in damage to the product property and/or cause serious injury. Do not use the product to conduct any illegal and inappropriate behavior (including but not limited to spying, military action and illegal investigation). Do not use the product to conduct any behaviors infringing upon the privacy of others. Do not use the product to infringe the property right of others.

Now meet your ONAGOfly

The ONAGOfly1's camera records video at up to 1080P 30fps and captures 15 megapixel photos. The built-in GPS enables hover in place and follow-me features.

Review the diagram below for a full list of your ONAGOfly1's parts:

⑧

②

● Front view

⑦

⑨

⑥

● Sideways view

The orange propellers are always to the front side.

● Left view

⑤

Cautions

Thank you for purchasing ONAGOfly1. For your safety, please read the operating instructions carefully before use. Be sure to watch our quick start video guide on

www.ONAGOfly.com or follow our YouTube channel: https:/ youtu.be AT7rxa-Eozk/ /

▲

▲ ▲

▲

⑤

②

③

①

④

● Bottom view

⑩

▲

⑥ Propellers

Page 3

ONAGOfly1's propellers can be dismantled.* When assembling, the propellers should be installed in corresponding positions. The propellers engraved with the numbers. The letters marked on propellers (A, B, C, D) shall be respectively corresponding to the letters on bottom machine arms during assembly. The method of installing is seen as the figure (1). The propellers must be installed in the right position regarding the safety. As seen in figure (1). Otherwise Onagofly1 flight may be affected. Orange propellers shall

√

Notes:

There're two at the bottom of the GPS antenna coverage. So does that on PCB board. These touch pots must be connected when installing. The Micro USB port on the aircraft is only for maintenance. Please do not connnect it for charging.

contacts

Technical specification:

Aircraft

100*100*45mm Weight: 135g (±2g) Max Ascent Speed: 5m/s Max Descent Speed: 3m/s Max Speed: 15Km/h Max Service Ceiling: 30m Max Flight Time: Approximately 12 minutes

Features

Auto-takeoff Auto-landing Follow-me Tilt mode

Battery

800mAh LiPo 2S Memory card up to 64GB (exFAT C10 and above) Battery power: 5.9Wh Operating temperature: -10℃ to 40℃

Aircraft dimension (L*W*H):

Controlled by mobile device

Wifi working frequency: 2.4GHz Max Communication Distance (open area): 30-50m (depending on Wifi signal environment) Receiving sensitivity of signals: -50dBm

Camera

Photos: 15 megapixels Video: 1080P@30fps

Other accessories

3-inch propellers

Something you need to know before using your ONAGOfly1:

be installed on the motor on the same side as the camera lens. After the installation, please place the aircraft on open ground flatly, taking off from the uneven ground may affect its attitude. (The camera's front should be the same as the pilot's. Before taking off please make sure the camera's front is the same as pilot's) *When disassemble the propellers, please fix the motor with one hand and rotate the propellers counterclockwise upside slowly. If video recording or taking photo is necessary, please make sure that Micro SD card (the maximum memory of Micro SD card is 64GB (exFAT), Class10 and above) has been correctly inserted. Besides, please format the Micro SD card into FAT32 or exFAT (for 64GB SD card) format. Otherwise the aircraft may not be turned on. Maintain control at all times: even when using ONAGOfly1 autopilot functions such as Auto-Takeoff, Auto-landing, always keep your hands on the Mobile Device and maintain control of your aircraft when it is in flight. Auto-landing due to the low battery, please do not fly it again manually, which can result in damage to the battery. Each time when you finish use with ONAGOfly1, please make sure to shut down the power by pressing the power button.

Environmental Considerations

Do not fly in severe weather conditions. This include high winds (speed of 8-16km/h or more), snow rain and fog. Only fly in open areas. Tall buildings and steel structures may affect the accuracy of the on-board compass and GPS signal. Avoid obstacles, crowds, high-voltage power lines, trees and bodies of water. Minimize electromagnetic interference by avoiding areas with high levels of electromagnetism, including mobile phone base stations, radio transmission towers, or Wi-Fi hotspots. Aircraft and battery are subject to environment factors such as air density and temperature. Be very careful when flying 6km (19,600ft) or more above sea level, as battery and aircraft performance may not be at peak efficiency. The GPS positioning mode can not be used for flight in the Antarctic/Arctic Circle.

● Figure (1)

▲

Make sure to check whether the propellers are intact and fixed before flight, and do not take off if any propellers are damaged or loose.

Please check the battery capacity before taking off and check whether the Micro SD card is correct installed. The right way to install the Micro SD card: The side with metal contacts on should be upside when inserting into the slot.

When the GPS is wink (As seen in figure (11)), Onagofly1 could fly stable in the air but could not hold its position.

The initial password and the wifi network name would be modified in the setting menu.(As seen in figure (9)). It vary when you restart.

▲

▲ ▲

▲

Page 4

You could set the video resolution, previewing resolution of real-time image transmission, the size of the photos (it's needed to switch to the photo mode to enable the setting) and the IR obstacle avoidance. When the aircraft is in motion (flying) it is unable to change the settings in the menu.

Enable GPS on your Mobile Device. Turn on the aircraft, and wait until the GPS icon turns orange on App (As seen in Appendix figure (10)). Take off and make the aircraft hold in position by 4-5 meters steadily. Turn off the tilt mode. Turn on the GPS follow by pressing the Follow icon until it turns orange.

Notes：

Onagofly will hover when the GPS signal is lost during the following mode. If you want to switch to tilt mode, it needed to turn it on manually. Before turning off the following mode, please note the direction of orange propellers point to, then make the operation.

GPS follow mode

The ONAGOfly1 equipped with GPS module, please only use the aircraft in open areas. When your ONAGOfly1 gets enough GPS signal, the GPS icon on App turns orange and the status of the aircraft indicator lights as seen in Appendix figure (10). It's recommended to turn the camera on after the GPS positioning mode is active (Back LEDS turn to blue or GPS icon on App turns to orange), otherwise it will affect the controlling indication. The GPS signal is very sensitive to electromagnetic interference, which can cause abnormal GPS data, leading to poor flight performance or even failure. Regular calibration is required for optimal performance.

Positioning mode:

Your mobile device can control the aircraft within average communication distance of around 30m (98.4ft) in an open space (the actual distance may be affected by the communication conditions). * ONAGOfly has HD real-time video streaming. The live streaming video of ONAGOfly1 available through the ONAGOfly App. Once connected with the ONAGOfly App, the tilt mode is switched off by default but the user can activate the function by keep pressing tilt mode button and control the flight direction by tilting the mobile device.*

Using the mobile device App

Download the ONAGOfly app Search "ONAGOfly" on the App Store or Google Play and download the ONAGOfly app to your mobile device. *ONAGOfly App compatible with device with Android 4.4, iOS 7.0 or above. Watch the tutorial videos on www.ONAGOfly.com or follow our YouTube https://youtu.be/AT7rxa-Eozk Check your App

App interface

Click and back to the album to preview the footage and photos taken by ONAGOfly1.

① Click the Home icon it will go back to the Media interface.

Notes：

The GPS icon turns orange when GPS connected, gray means off. ②

*The communication distance measured in anexperimental environment is approximately 98ft-262ft (30-50m). It may change under different communication situations. *The gravity sensor of your mobile deviceis sensitive, please do not make big movement with your mobile device when control ONAGOfly1. *The GPS follow function could only be actived once the GPS connected.

● Figure (2)

Android

iOS

▲

▲ ▲

▲ ▲ ▲

When ONAGOfly1 gets enough GPS signal, the aircraft will be able to activate the Follow mode. The accuracy of GPS is affacted by the strength of GPS signal. How to activate the Follow mode:

▲

④⑤⑥⑦⑧

⑤

These icons are gray when they're not active. It turns orange when it's

active. Tilt Mode is disable by default and its icon turns orange when it's active.

70%

Normal

GPS

Unlick

①

③ ⑤④

②

⑥

⑦

⑨

⑧

⑩

① ② ③ ④

⑤

⑥

⑦

Home

Snapshot Speed mode: Normal and Fast Switch Unlock/Lock GPS link and GPS following Virtual control key

Gravity sensor mode switch

( Tilt Mode Switch)

⑩ Rotate horizontally(YAW direction)

Vertical movement (UP and DOWN)

⑧⑨ Auto-landing

Mode switch between video and photo

Page 5

Open camera and wait until the GPS icon on ONAGOfly app turns orange before taking off. Once the GPS icon on ONAGOfly app turns orange, you're ready for taking off. Hold the Lock button until the propellers spinning. Hold your mobile device flat. Press Auto-takeoff button until the aircraft automatically take off. Push up/down the vertical movement bar to adjust Onagofly1's flying height.

Getting ready to takeoff your ONAGOfly1

The connecting frequency between the mobile device and the aircraft is 2.4GHz. During the flight, please do not use other 2.4GHz communication devices simultaneously.

Turn on ONAGOfly1

Connect ONAGOfly1 to your mobile devices

Takeoff

Tilt mode control

Auto-Landing

Press the Auto-landing button. Maintain control at all times during auto-landing.

Camera

You can always switch the Photo/Video mode by pressing the photo/video icon on the ONAGOfly1 app before take-off. You can always take video before take-off. It's recommended not to switch the photo/video or take video during flight.

GPS follow

Enable GPS on your Mobile Device. Turn on the aircraft, and wait until the GPS icon turns orange on App. Take off and make the aircraft hold in position by 13ft-16ft (4-5 meters) steadily. Turn off the tilt mode by releasing your finger on the tilt mode button. Turn on the GPS follow by pressing the Follow icon until it turns orange.

Battery charging

Please use the charger provided officially by the ONAGOfly. Connect the battery supply firstly before charging (Shown in Bottom view ⑤). Connect the charger to the AC power supply (100-240 V, 50/60 Hz, please use the power changeover plug if needed). Please ensure the aircraft is turned off and the plug in the battery bin is unplug before charging. The indicator lights are flashing in green indicates that the battery is charging.

● Figure (7)

Place your ONAGOfly1 on a flat surface, and make sure the orange propellers are always to the front side. Press the on/off button. The on/off button is shown as the Figure (3). The aircraft beep and meanwhile the indicator lights on (as shown in figure (10,11)) indicating that the aircraft is turned on. When the back LEDs are red it means the status of the aircraft is abnormal and you should not take off in that case.

● Figure (3)

▲

▲ ▲

▲

▲ ▲ ▲ ▲ ▲

▲

● Figure (4)

▲

▲ ▲ ▲

70%

Normal

GPS

Unlock

▲

Connect your ONAGOfly1 to the mobile device by connecting the Wi-Fi. Choose the Wi-Fi named “OnagoflyXXX”, and enter the default password "12345678". The initial password and the wifi network name would be modified in the setting menu.

▲ ▲

▲

Virtual joystick control mode

You could use the virtual joystick to control the flight direction of ONAGOfly1 (when the tilt mode is off).

Always keep your mobile device flat. Pressing and always hold the tilt mode button when you use tilt mode to pilot it. Tilt your mobile device, and your aircraft will move forward and backward. Use the turning bar to rotate slide.

● Figure (5) ● Figure (6)

▲ ▲

▲

Use the vertical movement bar to make ONAGOfly1 up and down.

▲

Page 6

Camera parameters can be setup through the App setting button. You can use your app to record video, take picture or play back. You can set the resolution as 1080P/720P/WVGA/VGA MOV. You can change video recording/photo mode in

Check that all of the following items are in your package. If any items are missing, please contact ONAGOfly or your local dealer.

ONAGOfly is a registered trademark used by Acumen Robot Intelligence Inc.

Camera

Notes:

When photographing, please make sure that the is sufficiently charged, and if aircraft power is fully consumed during recording and photographing, it may cause video and pictures to be missing. ONAGOfly1 has no legal responsibility for video and pictures missing due to improper operation.

aircraft

Appendix

Status indicator light of aircraft

When the light at aircraft tail is winking in blue, it means that the GPS related functions work.

When the light at aircraft tail is winking in green, it means that the current GPS signal doesn't support the GPS related functions.

When all the lights are red, it means alarm for low battery, loss of signal and other abnormal situations.

In the Box

Aircraft body X1

Propeller Pairs X3

Power Cable X2

Charger X1

Quick Start Guide v1.2

When the low power is detected, a notification will be shown on your app. Please try to make ONAGOfly1 landing. When the Wifi disconnected or the battery is in extremely low power, it will landing automatically. (Shown in figure (12)). Please use the ONAGOfly1 within your eyesight and pay attention to the status of the Wifi signal and the battery power. When the Wifi signal is extremely weak or the battery power is extremely low, and in the case there's a danger to land nearby, please pilot the aircraft to return manually.

Low power warning during flying

70%

Normal

GPS

Unlock

Movie Size

LiveView Size

Loop recording

Record Audio

Object Avoid

1080P

720P

WVGA

VGA

the camera setup menu. You can set the photo resolution in Photo mode. You can download the Photo/Video in Micro SD card of OANGOfly1 with mobile device through ONAGOfly App camera roll. You may also use SD card reader to download all photo/video files to your computer.

This instruction is subject to updated contents without prior notice.

● Figure (8)

● Figure (9) ● Figure (10) ● Figure (11)

▲

▲ ▲

▲