ONA BANGLE ONA0102 User Manual

MANUAL INSTRUCTION AND CARE ADVICE
www.onabangle.com
ONA0102
bracelet with e-display
PLEASE MAKE SURE THAT YOU DOWNLOAD THE
ONA BANGLE APP FROM YOUR APP-STORE
For more info on requirements please visit www.onabangle.com
Look for „ONA BANGLE” app in the
Google Play-Store
Look for „ONA BANGLE” app in the
Apple-Store
PLEASE MAKE SURE YOU PUT YOUR ONA BANGLE ON
YOUR WRIST FROM THE RIGHT DIRECTION
If you feel that the bangle is not comfortable, please consider a different size.
For more info about sizes please visit www.onabangle.com
Turn it slightly on the side and slide
it upon your wrist
Do not force it or push it strongly
from the front side
PLEASE MAKE SURE THAT YOUR SMARTPHONE AND
ONA BANGLE IS WITHIN A RANGE WHEN CHANGING ART
Please make sure that Bluetooth is turned on your smartphone.
For more info about the technology please visit www.onabangle.com
Keep your smartphone and bangle
within 60cm for fast change
If the range between the two is too
long, it might not work
PLEASE MAKE SURE YOU PLACE THE ONA BANGLE ONTO
THE CHARGER WITH THE RIGHT POSITION
Please make sure that you wait a few seconds for the blue light to turn on after positioning.
For more info about the battery and the charger please visit www.onabangle.com
Place it in the middle and look for
the blue light to turn on
If it is not in the middle or the blue
light is off it will not charge
CARE ADVISE
PLEASE MAKE SURE YOU READ THE NOTE CAREFULLY
For more info pleae visit www.onabangle.com
ONA bangle is blending high-tech innovation and jewellery aesthetics and therefore it is crafted with delicate materials, which must be handled with special care in accordance with the following care advice in order to avoid damages to the product, which ONA may not be held liable for. To ensure that your ONA bangle remains in beautiful condition over time and to prevent scratches, chips or other damages, please observe the following:
Store your ONA bangle in the original packaging or a soft pouch to avoid scratches.
Polish your ONA bangle frequently with a soft cloth to maintain its original, lustrous finish.
Remove the ONA bangle before washing hands, swimming, and/or applying products (e.g., perfume, hairspray,
soap, or lotion), as this could harm the metal and reduce the life of the plating, as well as cause discoloration and loss of reflections of the display.
Put on ONA bangle last when dressing and take off first when undressing.
Avoid direct contact with both salt and fresh water, solvents, detergents, perfumes, cosmetic products, etc.
Avoid hard contact (i.e., knocking against objects) that can scratch or chip the metal or display surface.
Avoid wearing the bangle together with bracelets, metallic chains, watches or any other contact with hard objects.
Avoid storing the bangle in cold(< 0°C) or hot ( °C <) places
1
50
www.onabangle.com
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
For Wireless charger
For Bracelet:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Loading...