Omron S8VS06024B, S8VS09024, S8VS09024A, S8VS06024A, S8VS01524 Data Sheet

...

New Product

Switch Mode Power Supply

(15/30/60/90/120/180/240/480-W Models)

S8VS

60/90/120/180/240/480-W Models New Models with Indication

Monitor and Simple Functions for Easy System Commissioning

• New 90-W models with indication monitor that conform to UL Class 2 Output standards.

• New models with screwless terminal blocks and indication monitor.

• Status displayed on 3-digit, 7-segment display.

• Safety standards: UL 508/60950-1, CSA C22.2 No. 107.1/60950-1 EN 50178 (= VDE 0160) EN 60950-1 (= VDE 0805 Teil 1)

• Input conditions: DC input is also possible from 80 to 370 VDC (Not compliant with EC Directives and other safety sta nda rd s.)

15/30-W Models Compact, Thin Power Supplies

That Mount Just About Anywhere to Contribute to Control Panel Downsizing

• Compact and thin: 22.5 × 85 × 96.5 mm (W × H × D).

• Three mounting directions (standard, horizontal, facing horizontal).

• Mounting directly to the panel is possible.

• Safety standards: UL 508/60950-1, CSA C22.2 No.107.1/60950-1, EN 50178 (= VDE 0160), EN 60950-1 (= VDE 0805 Teil 1)

• Input conditions: DC input is also possible from 80 to 370 VDC (Not compliant with EC Directives and other safety sta nda rd s.)

Features Common to All Models

• Mount to DIN Rail.

• Complies with SEMI F47-0706 (200-VAC input).

• RoHS-compliant.

Refer to Safety Precautions for All P ow er Supplies and Safety

Precautions on page 32.

S8VS

Model Number Structure

Model Number Legend

Note: Not all combinations are possible. Refer to List of Models in Ordering Information, below.

S8VS- @@@@@@@@-@

1234 5 6

1. Power Ratings

015: 15 W 030: 30 W 060: 60 W 090: 90 W 120: 120 W 180: 180 W 240: 240 W 480: 480 W

2. Output voltage

05: 5 V 12: 12 V 24: 24 V

3. Indication monitor

None: Without indication monitor (standard model) A: With indication monitor (maintenance forecast monitor) B: With indication monitor (total run time monitor) BE: With indication monitor but without alarm output (total run

time monitor)

Note:

Estimates can be provided for coatings and other specifications that are not given in the datasheet. Ask your OMRON representative for details.

4. Alarm output

None: Sinking (Emitter COM) * P: Sourcing (Collector COM)

Note: No alarm output possible with 60-W models. * Both sinking and sourcing outputs are available for 480-W models.

5. UL Class 2 Output Standards (UL 1310)

None: Does not conform. * S: Conforms.

* 15-W, 30-W, and 60-W models conform to Class 2 output standards

(UL 1310).

Note: The S option is available only for 90-W models.

6. Terminal Block Form

None: Screw terminal block F: Screwless terminal block

Ordering Information

List of Models

Note: For details on normal stock models, contact your nearest OMRON representative.

Models without Indication Monitor (Standard Models)

Power ratings Input voltage Output voltage Output current

5 V 2.0 A Yes S8VS-01505 *1

15 W

30 W

60 W

90 W 3.75 A

120 W 5 A --- S8VS-12024 S8VS-12024-F 180 W 7.5 A --- S8VS-18024 S8VS-18024-F 240 W 10 A --- S8VS-24024 S8VS-24024-F

480 W 100 to 240 VAC

*1. The output capacity of the S8VS-01505 is 10 W. *2. The output capacity of the S8VS-03005 is 20 W. *3. The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

100 to 240 VAC (allowable range: 85 to 264 VAC or 80 to 370 VDC *3)

12 V 1.2 A Yes S8VS-01512 24 V 0.65 A Yes S8VS-01524 5 V 4.0 A Yes S8VS-03005 *2 12 V 2.5 A Yes S8VS-03012 24 V 1.3 A Yes S8VS-03024

2.5 A Yes S8VS-06024 S8VS-06024-F

24 V

20 A Peak current 30 A (200 VAC)

UL Class 2

Output standards

--- S8VS-09024 S8VS-09024-F

Yes S8VS-09024S S8VS-09024S-F

--- S8VS-48024 S8VS-48024-F

Models with Indication Monitor (Maintenance Forecast Monitor)

Power ratings Input voltage

60 W

90 W 3.75 A

120 W 5 A

180 W 7.5 A

240 W 10 A

480 W

*1. The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC). *2. In the Alarm output column, “sinking” indicates an emitter COM and “sourcing” indicates a collector COM.

100 to 240 VAC (allowable range: 85 to 264 VAC or 80 to 370 VDC *1)

100 to 240 VAC

Output

voltage

24 V

Output current

2.5 A --- Yes S8VS-06024A S8VS-06024A-F

20 A Peak current 30 A (200 VAC)

Alarm

output *2

Sinking --- S8VS-09024A S8VS-09024A-F Sinking Yes S8VS-09024AS S8VS-09024AS-F Sourcing --- S8VS-09024AP S8VS-09024AP-F Sourcing Yes S8VS-09024APS S8VS-09024APS-F Sinking --- S8VS-12024A S8VS-12024A-F Sourcing --- S8VS-12024AP S8VS-12024AP-F Sinking --- S8VS-18024A S8VS-18024A-F Sourcing --- S8VS-18024AP S8VS-18024AP-F Sinking --- S8VS-24024A S8VS-24024A-F Sourcing --- S8VS-24024AP S8VS-24024AP-F

Sinking/ sourcing

UL Class 2

Output standards

--- S8VS-48024A S8VS-48024A-F

Models with Indication Monitor (Total Run Time Monitor)

Power ratings Input voltage

60 W

90 W 3.75 A

100 to 240 VAC (allowable

120 W 5 A

180 W 7.5 A

240 W 10 A

480 W

Note: Refer to pages 24 to 25 for the options that available.

range: 85 to 264 VAC or 80 to 370 VDC) *1

100 to 240 VAC

Output

voltage

24 V

Output current

2.5 A --- Yes S8VS-06024B S8VS-06024B-F

20 A Peak current 30 A (200 VAC)

Alarm

output *2

--- --- S8VS-09024BE S8VS-09024BE-F

--- Yes S8VS-09024BES S8VS-09024BES-F Sinking --- S8VS-09024B S8VS-09024B-F Sinking Yes S8VS-09024BS S8VS-09024BS-F Sourcing --- S8VS-09024BP S8VS-09024BP-F Sourcing Yes S8VS-09024BPS S8VS-09024BPS-F

--- --- S8VS-12024BE S8VS-12024BE-F Sinking --- S8VS-12024B S8VS-12024B-F Sourcing --- S8VS-12024BP S8VS-12024BP-F

--- --- S8VS-18024BE S8VS-18024BE-F Sinking --- S8VS-18024B S8VS-18024B-F Sourcing --- S8VS-18024BP S8VS-18024BP-F

--- --- S8VS-24024BE S8VS-24024BE-F Sinking --- S8VS-24024B S8VS-24024B-F Sourcing --- S8VS-24024BP S8VS-24024BP-F

Sinking/ sourcing

UL Class 2

Output standards

--- S8VS-48024B S8VS-48024B-F

Model number

(screw terminal block)

Model number

(screw terminal block)

Model number

(screw terminal block)

Model number

(screwless terminal block)

Model number

(screwless terminal block)

Model number

(screwless terminal block)

S8VS

---

S8VS

Specifications

Ratings/Characteristics

Power ratings 15 W 30 W

Item Output voltage 5 V 12 V 24 V 5 V 12 V 24 V

Efficiency

Voltage *1 100 to 240 VAC (allowable range: 85 to 264 VAC, 80 to 370 VDC *5) Frequency *1 50/60 Hz (47 to 450 Hz)

Current

Input

Output

Additional functions

Other

Power factor --Harmonic current regulation Conforms to EN61000-3-2

Leakage current

Inrush current *2

Voltage adjustment range *3 −10% to 15% (with V.ADJ) Ripple noise voltage (at rated I/O) 60 mV max. 70 mV max. 60 mV max. 60 mV max. 90 mV max. 150 mV max. Input variation influence 0.5% max. (at 85- to 264-VAC input, 100% load) Load variation influence

(rated input voltage) Temperature variation influence 0.05%/°C max.

Startup time (at rated I/O) *2

Output hold time (at rated I/O) *2

Overload protection *2 The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC). Overvoltage protection *2 Yes *4 Output voltage indication No Output current indication No Peak-hold current indication No Maintenance forecast monitor indication No Maintenance forecast monitor output No Total run time monitor indication No Total run time monitor output No Undervoltage alarm indication Yes (color: red) Undervoltage alarm output No Parallel operation No

Series operation Operating ambient temperature Refer to the derating curve in Engineering Data. (with no icing or condensation)

Storage temperature −25 to 65°C Operating ambient humidity 25% to 85% (Storage humidity: 25% to 90%)

Dielectric strength

Insulation resistance 100 MΩ min. (between all outputs and all inputs/ PE terminals) at 500 VDC Vibration resistance 10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions Shock resistance 150 m/s2, 3 times each in ±X, ±Y, and ±Z directions Output indicator Yes (color: green)

EMI

EMS Conforms to EN61204-3 high severity levels

Approved standards

SEMI F47-0706 (With 200-VAC input) Weight 160 g max. 180 g max.

*1. Do not use an inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but the rise in the internal

temperature of the Power Supply may result in ignition or burning.

*2. For a cold start at 25°C. Refer to Engineering Data on page 18 for details. *3. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than +15% of the voltage adjustment range. When adjusting

the output voltage, confirm the actual output voltage from the Power Supply and be sure that the load is not damaged.

*4. To reset the protection, turn OFF the input power for three minutes or longer and then turn it back ON. *5. The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

With 100-VAC input 74% typical 79% typical 83% typical 74% typical 81% typical 85% typical With 200-VAC input 73% typical 78% typical 80% typical 74% typical 80% typical 86% typical

With 100-VAC input 0.45 A max., 0.34 A typical 0.9 A max., 0.66 A typical With 200-VAC input 0.25 A max., 0.22 A typical 0.6 A max., 0.4 A typical

With 100-VAC input 0.5 mA max. With 200-VAC input 1.0 mA max. With 100-VAC input 17.5 A max., 14 A typical With 200-VAC input 35 A max., 28 A typical

2.0% max. (5 V), 1.5% max. (12 V, 24 V), (with rated input, 0 to 100% load)

With 100-VAC input 580 ms typical 530 ms typical 600 ms typical 500 ms typical 560 ms typical 560 ms typical With 200-VAC input 340 ms typical 360 ms typical 400 ms typical 360 ms typical 380 ms typical 400 ms typical With 100-VAC input 39 ms typical 27 ms typical 28 ms typical 31 ms typical 22 ms typical 31 ms typical With 200-VAC input 187 ms typical 134 ms typical 134 ms typical 174 ms typical 123 ms typical 140 ms typical

Models with 24-V output: Possible for up to 2 Power Supplies (with external diode) Models with 5- or 12-V output: Not possible

3.0 kVAC for 1 min. (between all inputs and outputs; detection current: 20 mA)

2.0 kVAC for 1 min. (between all inputs and PE terminals; detect ion current: 20 mA)

1.0 kVAC for 1 min. (between all outputs and PE terminals; detection current: 20 mA)

Conducted Emissions

Radiated Emissions Conforms to EN61204-3 EN55011 Class B

Conforms to EN61204-3 EN55011 Class B and based on FCC Class A

UL Listed: UL508 (Listing, Class2 Output: Per 1310) UL UR: UL60950-1 (Recognition) cUL: CSA C22.2 No.107.1 (Class2 Output: Per CSA C22.2 No.223) cUR: CSA C22.2 No.60950-1 EN/VDE: EN50178 (=VDE0160), EN60950-1 (=VDE0805 Teil1)

S8VS

Power ratings 60 W 90 W

Item Type Standard

Efficiency

Voltage *1 100 to 240 VAC (allowable range: 85 to 264 VAC or 80 to 370 VDC *11) Frequency *1 50/60 Hz (47 to 450 Hz)

Current

Input

Output

Additional functions

Other

*1. Do not use an inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but the rise in the internal temperature of the Power Supply may result in *2. For a cold start at 25°C. Refer to Engineering Data on page 18 for details.

*3. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than +15% of the voltage adjustment range (by more than +10% for 240-W models w ith indi cation m onitor) . *4. To reset the protection, turn OFF the input power for three minutes or longer and then turn it back ON.

*5. Displayed on 7-segment LED. (character height: 8 mm) *6. Resolution of output voltage indication: 0.1 V, Precision of output voltage indication: ±2% (percentage of output voltage value, ±1 digit) *7. Resolution of output current indication: 0.1 A; Precision of output current indication: ±5% F.S. ±1 digit max. (specified by rated output voltage) *8. Resolution of peak-hold current indication: 0.1 A; Precision of peak-hold current indication: ±5% F.S. ±1 digit max. (specified by rated output voltage);

*9. A Type and B Type: Sinking, AP Type and BP Type: Sou r cing, BE Type: No alarm output. *10. S8VS-06024A, S8VS-09024A/AP, S8VS-12024A/AP, S8VS-18024A/AP, and S8VS-24024A/AP only *11. The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

Power factor --Harmonic current regulation Conforms to EN61000-3-2

Leakage current

Inrush current *2 Voltage adjustment range *3 −10% to 15% (with V. ADJ) (The voltage cannot be adjusted for the S8VS-09024@@@S-@.)

Ripple noise voltage (at rated I/O) 70 mV max. 90 mV max. 250 mV max. 150 mV max. Input variation influence 0.5% max. (at 85- to 264-VAC input, 100% load) Load variation influence (rated input voltage) Temperature variation influence 0.05%/°C max.

Startup time (at rated I/O) *2

Output hold time (at rated I/O) *2

Overload protection *2 Overvoltage protection *2, *4 Yes Output voltage indication *5 No Yes (selectable) *6 No Yes (selectable) *6 Output current indication *5 No Yes (selectable) *7 No Yes (selectable) *7 Peak-hold current indication *5 No Yes (selectable) *8 No Yes (selectable) *8 Maintenance forecast monitor indication *5

Maintenance forecast monitor output No Total run time monitor indication *5 No Yes (selectable) No Yes (selectable) Total run time monitor output *5 No Undervoltage alarm indication *5 No Yes (selectable) No Yes (selectable)

Undervoltage alarm output terminals No Parallel operation No Series operation Yes for up to 2 Power Supplies (with external diode) Operating ambient temperature Refer to the derating curve in . (with no icing or condensation) Storage temperature −25 to 65°C Operating ambient humidity 25% to 85% (Storage humidity: 25% to 90%)

Dielectric strength

Insulation resistance 100 MΩ min. (between all outputs/ alarm outputs and all inputs/ PE terminals) at 500 VDC Vibration resistance Shock resistance 150 m/s2, 3 times each in ±X, ±Y, and ±Z directions

Output indicator Yes (color: green)

EMI

EMS Conforms to EN61204-3 high severity levels

Approved standards *11

SEMI *11 F47-0706 (With 200-VAC input) Weight 330 g max. 490 g max.

ignition or burning.

When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that the load is not damaged.

Signal width required for peak-hold current: 20 ms

With 100-VAC input 84% typical 83% typical 8 3% typical 83% typical With 200-VAC input 83% typical 85% typical 8 4% typical 85% typical

With 100-VAC input With 200-VAC input

With 100-VAC input 0.5 mA max. With 200-VAC input 1.0 mA max. With 100-VAC input 17.5 A max., 14 A typical With 200-VAC input 35 A max., 28 A typical

With 100-VAC input 620 ms typical 460 ms typical 460 ms typical 660 ms typical With 200-VAC input 400 ms typical 290 ms typical 300 ms typical 420 ms typical With 100-VAC input 34 ms typical 33 ms typical 28 ms typical 28 ms typical With 200-VAC input 158 ms typical 154 ms typical 132 ms typical 136 ms typical

Conducted Emissions

Radiated Emissions

1.7 A max., 1.3 A typical

1.0 A max., 0.68 A typical

1.5% max. (with rated input, 0 to 100% load)

105% to 160% of rated load current (101% to 110% of rated load current for the S8VS-09024

No Yes (selectable) No No Yes (selectable) No

3.0 kVAC for 1 min. (between all inputs and outputs/ alarm outputs; detection current: 20 mA)

2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)

1.0 kVAC for 1 min. (between all outputs/ alarm outputs and PE terminals; detection current for standard models: 30 mA, detection current for models with indication monitor: 20mA) 500 VAC for 1 min. (between all ou tputs and alarm outputs; detection current: 20 mA)

10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z d irections 10 to 150 Hz, 0.35-mm single amplitude (5 G max.) for 80 min each in X, Y, and Z directions

Models with indication monitor: Conforms to EN61204-3 EN55011 Class A and based on FCC Class A, Conforms to EN61204-3 EN55011 Class B *11 Standard models: Conforms to EN61204-3 EN55011 Group 1 Class B and based on FCC Class A

Models with indication monitor: Conforms to EN61204-3 EN55011 Class A, Conforms to EN61204-3 EN55011 Class B *11 Standard models: Conforms to EN61204-3 EN55011 Group 1 Class B

UL: UL 508 (Listing; Class 2 Output: Per UL1310), UL UR: UL 60950-1 (Recognition), cUL: CSA C22.2 No.107.1 (Class 2 Output: Per CSA C22.2 No.

223), cUR: CSA C22.2 No.60950-1, EN/VDE: EN 50178 (= VDE 0160), EN 60950-1 (= VDE 0805 Teil 1) KOSHA S Mark *10

Maintenance

forecast monitor

1.7 A max., 1.3 A typical

1.0 A max., 0.78 A typical

Total run time

monitor

Standard

2.3 A max., 1.9 A typical

1.4 A max., 1.0 A typical

@@@S-@

UL: UL 508 (Listing) UL Listed (S8VS-09024@@@S-@ only.): UL 508 (Listing, Class 2 Output: Per UL1310), UL UR: UL 60950-1 (Recognition), cUL: CSA C22.2 No.107.1, cUL (S8VS-09024-@@@S-@ only): CSA C22.2 N o.107.1 (Cla ss 2 Output: Per CSA C22.2 No. 223), cUR: CSA C22.2 No.60950-1, EN/VDE: EN 50178 (= VDE 0160), EN 60950-1 (= VDE 0805 Teil 1) KOSHA S Mark *10

Maintenance

forecast monitor

2.3 A max., 1.9 A typical

1.4 A max., 1.2 A typical

), inverted L voltage drop, intermittent, automatic reset

Yes (transistor output), 30 VDC max., 50 mA max. *9

Total run time

monitor

Yes (transistor output), 30 VDC max., 50 mA max. *9

S8VS

Power ratings 120 W 180 W

Item Type Standard

Efficiency

Voltage *1 100 t o 240 VAC (allowable range: 85 to 264 VAC or 80 to 370 VDC *11) Frequency *1 50/60 Hz (47 to 63 Hz)

Current

Input

Output

Additional functions

Other

Power factor 0.9 min. Harmonic current regulation Conforms to EN61000-3-2

Leakage current

Inrush current *2

Voltage adjustment range *3 −10% to 15% (with V.ADJ) Ripple noise voltage (at rated I/O) 60 mV max. 130 mV max. 50 mV max. 180 mV max. Input variation influence 0.5% max. (at 85- to 264-VAC input, 100% load) Load variation influence

(rated input voltage) Temperature variation influence 0.05%/°C max.

Startup time (at rated I/O) *2

Output hold time (at rated I/O) *2

Overload protection *2 105% to 160% of rated load current, inverted L voltage drop, automatic reset Overvoltage protection *2, *4 Yes Output voltage indication *5 No Yes (selectable) *6 No Yes (selectable) *6 Output current indication *5 No Yes (selectable) *7 No Yes (selectable) *7 Peak-hold current indication *5 No Yes (selectable) *8 No Yes (selectable) *8 Maintenance forecast monitor indication *5 No Yes (selectable) No No Yes (selectable) No

Maintenance forecast monitor output No

Total run time monitor indication *5 No Yes (selectable) No Yes (selectable)

Total run time monitor output *5 No

Undervoltage alarm indication *5 No Yes (selectable) No Yes (selectable) Undervoltage alarm output terminals No Parallel operation No

Series operation Yes for up to 2 Power Supplies (with external diode) Operating ambient temperature Refer to the derating curve in . (with no icing or condensation) Storage temperature −25 to 65°C Operating ambient humidity 25% to 85% (Storage humidity: 25% to 90%)

Dielectric strength

Output indicator Yes (color: green)

EMI

EMS Conforms to EN61204-3 high severity levels

Approved standards *11

SEMI *11 F47-0706 (200-VAC input) Weight 550 g max. 850 g max.

Note: Refer to page 5 for notes 1 to 11.

With 100-VAC input 84% typical 8 3% typi cal 85% typical 85% typical With 200-VAC input 87% typical 8 5% typi cal 88% typical 87% typical

With 100-VAC input 1.9 A max., 1.5 A typical 2.9 A max., 2.2 A typical With 200-VAC input

With 100-VAC input 0.5 mA max. With 200-VAC input 1.0 mA max. With 100-VAC input 17.5 A max., 14 A typical With 200-VAC input 35 A max., 28 A typical

With 100-VAC input 550 ms typical 650 ms typical 570 ms typical 580 ms typical With 200-VAC input 400 ms typical 520 ms typical 470 ms typical 490 ms typical With 100-VAC input 52 ms typical 56 ms typical 58 ms typical 70 ms typical With 200-VAC input 54 ms typical 56 ms typical 62 ms typical 70 ms typical

Conducted Emissions

Radiated Emissions

1.1 A max.,

0.71 A typical

1.5% max. (with rated input, 0 to 100% load )

3.0 kVAC for 1 min. (between all inputs and outputs/ alarm outputs; detection current: 20 mA)

2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)

1.0 kVAC for 1 min. (between all outputs/ al arm outputs and PE terminals; de tection current f or standard model s: 30mA, detection current for models with indication monitor: 20 mA 500 VAC for 1 min. (between all outputs and alarm outputs; detection current: 20 mA)

10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions 10 to 150 Hz, 0.35-mm single amplitude (5 G max.) for 80 min each in X, Y, and Z directions

Models with indication monitor: Confo rms to EN61 204-3 E N550 11 Cla ss A and b ased on FC C Class A , Con forms to E N612 04-3 EN55011 Class B *11 Standard models: Conforms to EN61204-3 EN55011 Group 1 Clas s B and based on FCC Class A

Models with indication monito r: Conforms to EN61204-3 EN55011 Class A, Conforms to EN61204- 3 EN55011 Class B *11 Standard models: Conforms to EN61204-3 EN55011 Group 1 Class B

UL Listed: UL 508 (Listing), UL UR: UL 60950-1 (Recognition), cUL: CSA C22.2 No. 107.1, cUR: CSA C22.2 No. 60950-1, EN/VDE: EN 50178 (= VDE 0160), EN 60950-1 (= VDE 0805 Teil 1) KOSHA S Mark *10

Maintenance

forecast monitor

1.1 A max., 0.72 A typical 1.6 A max., 1.1 A typical

Yes (transistor output), 30 VDC max., 50 mA max. *9

Total run time

monitor

No No

Yes (transistor output), 30 VDC max., 50 mA max. *9

Standard

Maintenance

forecast monitor

Yes (transistor output), 30 VDC max., 50 mA max. *9

Total run time

monitor

Yes (transistor output), 30 VDC max., 50 mA max. *9

Power ratings 240 W 480 W

Item Type Standard

Efficiency

Input

Output

Additional functions

Other

Voltage *1 Frequency *1 50/60 Hz (47 to 63 Hz)

Current

Power factor 0.9 min. 0.95 min. Harmonic current regulation Conforms to EN61000-3-2

Leakage current

Inrush current *2

Voltage adjustment range *3 −10% to 15% (with V.ADJ) −10% to 15% (with V.ADJ) Ripple noise voltage (at rated I/O) 140 mV max. 160 mV max. 310 mV max. Input variation influence 0.5% max. (at 85- to 264-VAC input, 100% load) Load variation influence

(rated input voltage) Temperature variation influence 0.05%/°C max.

Startup time (at rated I/O) *2

Output hold time (at rated I/O) *2

Maintenance forecast monitor output No

Total run time monitor indication *5 No Yes (selectable) No Yes (selectable)

Total run time monitor output *5 No

Undervoltage alarm indication *5 No Yes (selectable) No Yes (selectable) Undervoltage alarm output terminals No Parallel operation No

Dielectric strength

Insulation resistance 100 MΩ min. (between all outputs/ alarm outputs and all inputs/ PE terminals) at 500 VDC

Vibration resistance

Shock resistance 150 m/s2, 3 times each in ±X, ±Y, and ±Z directions Output indicator Yes (color: green)

EMI

EMS Conforms to EN61204-3 high severity levels

Approved standards *11

SEMI *11 F47-0706 (200-VAC input) Weight 1,150 g max. 1,700 g max.

With 100-VAC input 85% typical 85% typical With 200-VAC input 88% typical 89% typical

100 to 240 VAC (allowable range: 85 to 264 VAC or 80 to 370 VDC *11)

With 100-VAC input 3.8 A max., 2.9 A typical 7.4 A max., 5.8 A typical With 200-VAC input 2.0 A max., 1.5 A typical 3.9 A max., 2.8 A typical

With 100-VAC input 0.5 mA max. With 200-VAC input 1.0 mA max. With 100-VAC input 17.5 A max., 14 A typical With 200-VAC input 35 A max., 28 A typical

1.5% max. (with rated input, 0 to 100% load )

With 100-VAC input 540 ms typical 510 ms typical 460 ms typical With 200-VAC input 230 ms typical 510 ms typical 340 ms typical With 100-VAC input 64 ms typical 46 ms typical 37 ms typical With 200-VAC input 64 ms typical 46 ms typical 41 ms typical

3.0 kVAC for 1 min. (between all inputs and outputs/alarm outputs; detection current: 20 mA)

2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)

1.0 kVAC for 1 min. (between all outputs/ alarm outputs and PE terminals; detection current for standard 240-W and 480-W models: 30 mA, detection current for 240-W models with indication monitor: 20 mA) 500 VAC for 1 min. (between all outputs and alarm outputs; detection current: 20 mA)

10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions 10 to 150 Hz, 0.35-mm single amplitude (5 G max.) for 80 min each in X, Y, and Z directions: 240 W 10 to 150 Hz, 0.35-mm single amplitude (3 G max.) for 80 min each in X, Y, and Z directions: 480 W

Models with indication monito r: Conforms to EN61204-3

Conducted Emissions

Radiated Emissions

EN55011 Class A and based on FCC Class A, Conforms to EN61204-3 EN55011 Class B *11 Standard models: Conforms to EN61204-3 EN55011 Group 1 Class B and based on FCC Class A

Models with indication monito r: Conforms to EN61204-3 EN55011 Class A, Conforms to EN61204-3 EN55011 Class B *11 Standard models: Conforms to EN61204-3 EN55011 Group 1 Class B

UL Listed: UL 508 (Listing), UL UR: UL 60950-1 (Recognition), cUL: CSA C22.2 No.107.1, cUR: CSA C22.2 No. 60950-1, EN/VDE: EN 50178 (=VDE 0160), EN 60950-1 (=VDE 0805 Teil 1) KOSHA S Mark *10

Note: Refer to page 5 for notes 1 to 11.

Maintenance

forecast monitor

Yes (transistor output), 30 VDC max., 50 mA max. *9

Total run time

monitor

Yes (transistor output), 30 VDC max., 50 mA max. *9

S8VS

Standard

100 to 240 VAC (allowable range: 85 to 264 VAC)

Conforms to EN61204-3 EN55011 Class A and based on FCC Class A Conforms to EN61204-3 EN55011 Class B *11

Conforms to EN61204-3 EN55011 Class A Conforms to EN61204-3 EN55011 Class B *11

Maintenance

forecast monitor

Yes (transistor output), 30 VDC max., 50 mA max.

Yes (transistor output), 30 VDC max., 50 mA max. *9

Total run time

monitor

Yes (transistor output), 30 VDC max., 50 mA max. *9

S8VS

Connections

Block Diagrams

S8VS-015@@ (15 W)

Fuse:

3.15 A

AC (L)

INPUT

AC (N)

S8VS-030@@ (30 W)

Fuse:

4.0 A

AC (L)

INPUT

AC (N)

Noise filter

Inrush

Rectifier

current

protection

Overcurrent

detection circuit

Inrush

Rectifier

current

protection

Overcurrent

detection circuit

Drive

control

circuit

Drive

control

circuit

Smoothing

circuit

Photocoupler

Smoothing

circuit

Photocoupler

Rectifier/

smoothing

circuit

detection circuit

Overvoltage

detection circuit

Rectifier/

smoothing

circuit

detection circuit

Overvoltage

detection circuit

Voltage

Undervoltage

indicator

Undervoltage

indicator

DC output

−V

DC output

−V

S8VS-06024A-@ (60 W) S8VS-06024B-@ (60 W)

Fuse

6.3 A

AC (L)

INPUT

Noise filter

AC (N)

S8VS-06024-@ (60 W)

Fuse

6.3 A

AC (L)

INPUT

AC (N)

Noise filter

Rectifier

Inrush

Rectifier/

current

smoothing

protection

circuit

Drive control circuit

Inrush current protection circuit

Drive control circuit

circuit

Photocoupler

Smoothing circuit

Photocoupler

Display circuit

Arithmetic operation circuit

Rectifier/smoothing circuit

Overcurrent circuit

Rectifier/smoothing circuit

Overcurrent circuit

Current detection circuit

Voltage detection circuit

Overvoltage detection circuit

Current detection circuit

Voltage detection circuit

Overvoltage detection circuit

S8VS

Switch

DC OUTPUT

−V

DC OUTPUT

−V

S8VS

S8VS-09024A@-@ (90 W) S8VS-09024B@-@ (90 W) S8VS-09024BE-@ (90 W) S8VS-09024A@S-@ (90 W) S8VS-09024B@S-@ (90 W) S8VS-09024BES-@ (90 W)

Fuse 8.0 A

AC (L)

INPUT

AC (N)

Noise filter

Rectifier

S8VS-09024-@ (90 W) S8VS-09024S-@ (90 W)

Inrush current

protection

circuit

Drive control circuit

Rectifier/ smoothing circuit

Photocoupler

Sinking type (S8VS-09024A-@, S8VS-09024B-@, S8VS-09024AS-@, S8VS-09024BS-@) Sourcing type (S8VS-09024AP-@, S8VS-09024BP-@, S8VS-09024APS-@, S8VS-09024BPS-@)

Type with no alarm output (S8VS-09024BE-@, S8VS-09024BES-@)

Display circuit

Rectifier/smoothing circuit

Overcurrent circuit

Voltage detection circuit

Overvoltage detection circuit

Arithmetic operation circuit

Current detection circuit

Switch

Photocoupler

DC OUTPUT

−V

Alarm DC Low

Yrs/kh

Common

AC (L)

INPUT

AC (N)

Fuse

8.0 A

Noise filter

Rectifier

Inrush current protection circuit

Drive control circuit

Smoothing circuit

Photocoupler

Rectifier/smoothing circuit

Overcurrent circuit

Current detection circuit

Voltage detection circuit

Overvoltage detection circuit

DC OUTPUT

−V

S8VS

S8VS-12024A@-@ (120 W) S8VS-12024B@-@ (120 W) S8VS-12024BE-@ (120 W)

Fuse 5.0 A

AC (L)

INPUT

AC (N)

Noise filter

Rectifier

S8VS-12024-@ (120 W)

Harmonic current suppression circuit (Power factor improvement)

Overcurrent circuit

Inrush current protection circuit

Drive control circuit

Smoothing circuit

Photocoupler

Sinking type (S8VS-12024A-@, S8VS-12024B-@) Sourcing type (S8VS-12024AP-@ S8VS-12024BP-@)

Type with no alarm output (S8VS-12024BE-@)

Display circuit Switch

Arithmetic operation circuit

Rectifier/smoothing circuit

Voltage detection circuit

Overvoltage detection circuit

Photocoupler

DC OUTPUT

−V

Alarm DC Low

Yrs/kh

Common

INPUT

AC (L)

AC (N)

Fuse

5.0 A

Noise filter

Rectifier

Harmonic current suppression circuit (Power factor improvement)

Drive control circuit

Overcurrent detection circuit

Inrush current protection circuit

Smoothing circuit

Photocoupler

Rectifier/smoothing circuit

Voltage detection circuit

Overvoltage detection circuit

DC OUTPUT

−V

S8VS

S8VS-18024A@-@ (180 W) S8VS-18024B@-@ (180 W) S8VS-18024BE-@ (180 W)

Fuse 6.3 A

AC (L)

INPUT

AC (N)

Noise filter

Rectifier

S8VS-18024-@ (180 W)

Harmonic current suppression circuit (Power factor improvement)

Drive control circuit

Overcurrent detection circuit

Inrush current protection circuit

Photocoupler

Smoothing circuit

Sinking type (S8VS-18024A-@, S8VS-18024B-@) Sourcing type (S8VS-18024AP-@, S8VS-18024BP-@)

Type with no alarm output (S8VS-18024BE-@)

Display circuit Switch

Arithmetic operation circuit

Rectifier/smoothing circuit

Voltage detection circuit

Overvoltage detection circuit

Photocoupler

DC OUTPUT

−V

Alarm DC Low

Yrs/kh

Common

INPUT

AC (L)

AC (N)

Fuse

6.3 A

Noise filter

Rectifier

Harmonic current suppression circuit (Power factor improvement)

Drive control circuit

Overcurrent detection circuit

Inrush current protection circuit

Photocoupler

Smoothing circuit

Rectifier/smoothing circuit

Voltage detection circuit

Overvoltage detection circuit

DC OUTPUT

−V

+ 26 hidden pages