Omron NYP25--12 SERIES, NYP17--13 SERIES, NYP1C--12 SERIES, NYP25--13 SERIES, NYP1C-*-11 SERIES User Manual

...

Industrial PC Platform

NY-series

Industrial Panel PC

User's Manual

NYP17-£ NYP17-£-12££ NYP17-£-13££ NYP25-£-11££ NYP25-£-12££ NYP25-£-13££ NYP1C-£-11££ NYP1C-£-12££ NYP1C-£-13££

-1

££

Industrial Panel PC

W555-E2-03

NOTE

transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or other-

wise, without the prior written permission of OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover,

because OMRON is constantly striving to improve its high-quality products, the information contained

in this manual is subject to change without notice. Every precaution has been taken in the preparation

of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is

any liability assumed for damages resulting from the use of the information contained in this publica-

tion.

Trademarks

• Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan

and other countries for OMRON factory automation products.

• Windows is a registered trademark of Microsoft Corporation in the USA and other countries.

• The SD and SDHC logos are trademarks of SD-3C, LLC.

• Intel, the Intel Logo, Celeron and Intel Core are trademarks of Intel Corporation in the U.S. and/or

other countries.

Other company names and product names in this document are the trademarks or registered trade-

marks of their respective companies.

Copyrights

Microsoft product screen shots reprinted with permission from Microsoft Corporation.

Introduction

Thank you for purchasing the Industrial Panel PC.

This manual contains information that is necessary to use the Industrial Panel PC (hereafter also

named as Panel PC). Please read this manual and make sure you understand the functionality and

performance of the Panel PC before attempting to use it.

Keep this manual in a safe place where it will be available for reference during operation.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-

tems (an electrical engineer or the equivalent).

• Personnel in charge of introducing Factory Automation systems.

• Personnel in charge of designing Factory Automation systems.

• Personnel in charge of installing and maintaining Factory Automation systems.

• Personnel in charge of managing Factory Automation systems and facilities.

Introduction

Applicable Products

This manual covers following Industrial Panel PC products:

Product Model

Industrial Panel PC, 15.4 inch

Industrial Panel PC, 12.1 Inch

• NYP17-£1

• NYP17-£12££-15WC100£

• NYP17-£13££-15WC100£

• NYP25-£11££-15WC100£

• NYP25-£12££-15WC100£

• NYP25-£13££-15WC100£

• NYP1C-£11££-15WC100£

• NYP1C-£12££-15WC100£

• NYP1C-£13££-15WC100£

• NYP17-£1

• NYP17-£12££-12WC100£

• NYP17-£13££-12WC100£

• NYP25-£11££-12WC100£

• NYP25-£12££-12WC100£

• NYP25-£13££-12WC100£

• NYP1C-£11££-12WC100£

• NYP1C-£12££-12WC100£

• NYP1C-£13££-12WC100£

1££-15WC100£

1££-12WC100£

Additional Information

Refer to 1-4 Product Configuration on page 1 - 5 for configuration details.

NY-series Industrial Panel PC User's Manual (W555)

CONTENTS

Introduction .............................................................................................................. 1

Intended Audience

Applicable Products ......................................................................................................................................... 1

Manual Information.................................................................................................. 7

Page Structure.................................................................................................................................................7

Special Information .......................................................................................................................................... 8

Terms and Conditions Agreement.......................................................................... 9

Warranty and Limitations of Liability ................................................................................................................ 9

Application Considerations ............................................................................................................................10

Disclaimers ....................................................................................................................................................10

Safety Precautions................................................................................................. 12

Definition of Precautionary Information.......................................................................................................... 12

Symbols ......................................................................................................................................................... 12

Warnings........................................................................................................................................................ 13

Cautions......................................................................................................................................................... 15

...........................................................................................................................................1

Precautions for Safe Use ...................................................................................... 16

Disassembly, Dropping, Mounting, Installation and Storage .........................................................................16

Wiring............................................................................................................................................................. 16

Power Supply Design and Turning ON/OFF the Power Supply.....................................................................17

Actual Operation ............................................................................................................................................ 17

Operation ....................................................................................................................................................... 18

General Communications ..............................................................................................................................18

Battery Replacement .....................................................................................................................................18

Cleaning, Maintenance and Disposal ............................................................................................................18

Precautions for Correct Use ................................................................................. 20

Storage, Installation and Mounting ................................................................................................................20

Wiring............................................................................................................................................................. 20

Actual Operation and Operation ....................................................................................................................21

Battery Replacement .....................................................................................................................................21

SD Memory Cards .........................................................................................................................................21

Cleaning and Maintenance ............................................................................................................................ 21

Regulations and Standards .................................................................................. 22

Conformance to EU Directives ......................................................................................................................22

Conformance to KC Standards......................................................................................................................23

Conformance to UL and CSA Standards.......................................................................................................23

Software Licenses and Copyrights ................................................................................................................23

Related Manuals..................................................................................................... 24

Related Products Manuals............................................................................................................................. 24

Industrial Monitor Manual ..............................................................................................................................25

Terminology and Abbreviations ........................................................................... 26

Industrial PC Platform ...................................................................................................................................26

Hardware ......................................................................................................................................................26

Software......................................................................................................................................................... 27

Revision History..................................................................................................... 28

Sections in this Manual ......................................................................................... 29

NY-series Industrial Panel PC User's Manual (W555)

Section 1 Overview

1-1 Intended Use .......................................................................................................................1 - 2

1-2

Hardware Features...............................................................................................................1 - 3

1-3 ID Information Label ............................................................................................................1 - 4

1-4 Product Configuration.........................................................................................................1 - 5

1-5 Industrial PC Platform Overview ........................................................................................1 - 6

1-5-1 Industrial Monitor ......................................................................................................................1 - 6

1-5-2 Industrial Box PC .....................................................................................................................1 - 7

1-5-3 Industrial Panel PC ..................................................................................................................1 - 7

Section 2 Hardware

2-1 Component Names and Functions.....................................................................................2 - 2

2-1-1

2-1-2 Back and Bottom of the Industrial Panel PC .............................................................................2 - 3

2-2 LED Indicators......................................................................................................................2 - 5

2-2-1 Bottom LED Indicators ..............................................................................................................2 - 5

2-2-2 Front LED and LED Indicator ....................................................................................................2 - 7

2-3 Power Button........................................................................................................................2 - 9

2-4 Drive Bays ..........................................................................................................................2 - 10

2-5 SD Memory Card Slot ........................................................................................................ 2 - 11

2-6 PCIe Card Slot .................................................................................................................... 2 - 12

2-7 Connectors ......................................................................................................................... 2 - 13

2-7-1 Power Connector ....................................................................................................................2 - 13

2-7-2 I/O Connector..........................................................................................................................2 - 13

2-7-3 USB Connectors .....................................................................................................................2 - 14

2-7-4 Ethernet Connectors ...............................................................................................................2 - 15

2-7-5 DVI Connector.........................................................................................................................2 - 15

2-7-6 RS-232C Connector (Optional) ...............................................................................................2 - 16

2-7-7 DVI-D Connector (Optional) ....................................................................................................2 - 16

2-8 Spare Parts ......................................................................................................................... 2 - 17

2-8-1 Battery.....................................................................................................................................2 - 17

2-8-2 Fan Unit...................................................................................................................................2 - 17

2-8-3 Accessory Kit ..........................................................................................................................2 - 18

2-9 Optional Hardware ............................................................................................................. 2 - 19

2-9-1 SD Memory Cards...................................................................................................................2 - 19

2-9-2 USB Flash Drives....................................................................................................................2 - 19

2-9-3 Storage Devices......................................................................................................................2 - 20

2-9-4 DVI Cables ..............................................................................................................................2 - 21

2-9-5 USB Type-A to USB Type-B Cables .......................................................................................2 - 21

2-9-6 Industrial Monitor ....................................................................................................................2 - 22

2-9-7 Power Supply ..........................................................................................................................2 - 22

2-9-8 UPS.........................................................................................................................................2 - 23

2-9-9 UPS Communication Cable ....................................................................................................2 - 23

Front and Top of the Industrial Panel PC ..................................................................................2 - 2

CONTENTS

Section 3 Software

3-1 Windows Operating System ...............................................................................................3 - 2

3-1-1 Determine Your Version of the Windows Operating Systems ...................................................3 - 2

3-1-2 Determine Your Ethernet Ports .................................................................................................3 - 3

3-2 Support Software ................................................................................................................. 3 - 4

3-2-1 Overview IPC Support Software for Windows...........................................................................3 - 4

NY-series Industrial Panel PC User's Manual (W555)

CONTENTS

3-2-2 Installed IPC Support Software .................................................................................................3 - 4

3-2-3

3-2-4 Industrial Monitor Utility ............................................................................................................3 - 9

3-2-5 Industrial Monitor Brightness Utility ........................................................................................3 - 12

3-2-6 Rescue Disk Creator ...............................................................................................................3 - 14

3-2-7 Industrial PC Tray Utility .........................................................................................................3 - 18

3-2-8 Power Attendant Lite Utility .....................................................................................................3 - 21

Industrial PC Support Utility .....................................................................................................3 - 5

3-3 Software for Developers....................................................................................................3 - 24

3-3-1 Overview IPC Developer Software for Windows.....................................................................3 - 24

3-3-2 Industrial PC System API .......................................................................................................3 - 25

3-3-3 Industrial Monitor API .............................................................................................................3 - 26

Section 4 Specifications

4-1 General Specifications .......................................................................................................4 - 2

4-1-1

4-1-2 General Electrical Specifications...............................................................................................4 - 3

4-1-3 Power Consumption Specifications...........................................................................................4 - 3

4-1-4 CPU Specifications ...................................................................................................................4 - 6

4-1-5 Memory Specifications ..............................................................................................................4 - 7

4-1-6 Storage Device Specifications ..................................................................................................4 - 8

4-1-7 PCIe Card Specifications ........................................................................................................4 - 10

4-2 Connector Specifications .................................................................................................4 - 12

4-2-1 Power Connector Specifications .............................................................................................4 - 12

4-2-2 I/O Connector Specifications...................................................................................................4 - 13

4-2-3 USB Connector Specifications ................................................................................................4 - 17

4-2-4 Ethernet Connector Specifications..........................................................................................4 - 18

4-2-5 DVI Connector Specifications .................................................................................................4 - 19

4-2-6 DVI-D Connector Specifications..............................................................................................4 - 21

4-2-7 RS-232C Connector Specifications.........................................................................................4 - 22

4-3 Software Specifications ...................................................................................................4 - 23

4-3-1 Available Windows Operating Systems...................................................................................4 - 23

4-3-2 Supported Languages.............................................................................................................4 - 23

4-4 Display Specifications.......................................................................................................4 - 24

4-5 Environmental Specifications...........................................................................................4 - 25

4-5-1 Operation Environment Specifications ....................................................................................4 - 25

4-5-2 Temperature and Humidity Specifications...............................................................................4 - 26

4-5-3 Recycling Specifications .........................................................................................................4 - 30

Dimensions and Weight ............................................................................................................4 - 2

Section 5 Installation

5-1 Unpack .................................................................................................................................. 5 - 3

5-1-1

5-1-2 Items Supplied ..........................................................................................................................5 - 4

5-2 Install Options ...................................................................................................................... 5 - 5

5-2-1 Install a Drive ............................................................................................................................5 - 5

5-2-2 Install the PCIe Card .................................................................................................................5 - 9

5-3 Mount ..................................................................................................................................5 - 14

5-3-1 Installation Method in Control Panels......................................................................................5 - 14

5-3-2 Product Orientation .................................................................................................................5 - 15

5-3-3 Temperature ............................................................................................................................5 - 16

5-3-4 Humidity ..................................................................................................................................5 - 18

5-3-5 Vibration and Shock ................................................................................................................5 - 18

5-3-6 Atmosphere.............................................................................................................................5 - 19

5-3-7 Electrical Environment ............................................................................................................5 - 19

5-3-8 Prepare the Mounting Surface ................................................................................................5 - 24

5-3-9 Mount the Panel PC ................................................................................................................5 - 26

Unpack Procedure ....................................................................................................................5 - 3

NY-series Industrial Panel PC User's Manual (W555)

CONTENTS

5-4 Wire .....................................................................................................................................5 - 27

5-4-1

5-4-2 Ground ....................................................................................................................................5 - 28

5-4-3 Wire the Power Connector ......................................................................................................5 - 34

5-4-4 Wire the I/O Connector ...........................................................................................................5 - 37

5-5 Connect...............................................................................................................................5 - 40

5-5-1 Connector Identification ..........................................................................................................5 - 41

5-5-2 Connection Procedure ............................................................................................................5 - 42

5-6 Initial Power ON .................................................................................................................5 - 44

5-6-1 Initial Power ON Procedure.....................................................................................................5 - 44

5-6-2 Windows Startup First Time ....................................................................................................5 - 46

5-7 Install Software ..................................................................................................................5 - 48

5-7-1 Internet Browser......................................................................................................................5 - 48

5-7-2 Firewall....................................................................................................................................5 - 49

5-7-3 Anti-virus Software ..................................................................................................................5 - 49

5-7-4 Drivers and Custom Software .................................................................................................5 - 50

5-7-5 Activate Windows....................................................................................................................5 - 50

5-7-6 Customize Windows................................................................................................................5 - 50

5-8 Connect UPS ......................................................................................................................5 - 51

5-8-1 Connect UPS Using the USB Connector ................................................................................5 - 52

5-8-2 Connect UPS Using the I/O Connector...................................................................................5 - 54

5-9 Create Backup and Repair Data .......................................................................................5 - 57

5-9-1 Create a New Rescue Disk with the Rescue Disk Creator .....................................................5 - 58

5-9-2 Create a Windows System Repair Disk and a Windows Backup............................................5 - 60

Wiring Warnings and Cautions................................................................................................5 - 27

Section 6 Operating Procedures

6-1 Touchscreen Operation.......................................................................................................6 - 2

6-2

Power ON..............................................................................................................................6 - 3

6-2-1 Power ON Using the Power Button...........................................................................................6 - 3

6-2-2 Power ON Using the Power ON/OFF Input...............................................................................6 - 3

6-2-3 Auto Power ON .........................................................................................................................6 - 4

6-3 Power OFF ............................................................................................................................ 6 - 5

6-3-1 Power OFF Using the Power Button .........................................................................................6 - 5

6-3-2 Power OFF Using Windows Shut Down ...................................................................................6 - 5

6-3-3 Power OFF Using the Power ON/OFF Input.............................................................................6 - 6

6-3-4 Forced Power OFF Using the Power Button.............................................................................6 - 6

6-4 React to Product Messages ................................................................................................ 6 - 7

6-5 React to Windows Messages..............................................................................................6 - 8

Section 7 Maintenance

7-1 Preventive Maintenance ...................................................................................................... 7 - 2

7-1-1

7-1-2 Clean the Touchscreen Surface ................................................................................................7 - 3

7-1-3 Clean the Panel PC...................................................................................................................7 - 3

7-1-4 Check the Gasket Seal .............................................................................................................7 - 4

7-1-5 Keep Software Updated ............................................................................................................7 - 4

7-1-6 Create Backup and Repair Data ...............................................................................................7 - 5

7-1-7 Check the Backup and Repair Media...................................................................................... 7 - 11

7-2 Corrective Maintenance ....................................................................................................7 - 13

7-2-1 Warning and Error Messages..................................................................................................7 - 13

7-2-2 Remove the Cover ..................................................................................................................7 - 15

7-2-3 Replace the Fan Unit ..............................................................................................................7 - 16

7-2-4 Replace the Battery.................................................................................................................7 - 18

7-2-5 Replace a Drive.......................................................................................................................7 - 20

Preventive Maintenance Schedule............................................................................................7 - 2

NY-series Industrial Panel PC User's Manual (W555)

CONTENTS

7-2-6 Replace the PCIe Card ...........................................................................................................7 - 25

7-2-7

7-2-8 Allocate a Drive in Windows....................................................................................................7 - 37

7-2-9 Windows Event Viewer............................................................................................................7 - 38

7-2-10 Windows Low on Memory .......................................................................................................7 - 40

7-2-11 Windows Blue Screens ...........................................................................................................7 - 41

7-2-12 Correct Display Functionality when Nothing is Displayed .......................................................7 - 41

7-2-13 Correct Touchscreen Functionality..........................................................................................7 - 42

Appendices

A-1 BIOS ..................................................................................................................................... A - 2

A-1-1

A-1-2 BIOS - Main.............................................................................................................................. A - 4

A-1-3 BIOS - Advanced ..................................................................................................................... A - 5

A-1-4 BIOS - Chipset ......................................................................................................................... A - 9

A-1-5 BIOS - Boot ............................................................................................................................ A - 10

A-1-6 BIOS - Security .......................................................................................................................A - 11

A-1-7 BIOS - Save & Exit..................................................................................................................A - 11

A-2 Customize Windows ......................................................................................................... A - 12

A-2-1 Enhanced Write Filter............................................................................................................. A - 12

A-2-2 File-Based Write Filter............................................................................................................ A - 13

A-2-3 Unified Write Filter.................................................................................................................. A - 15

A-2-4 Trusted Platform Module........................................................................................................ A - 17

A-3 DVI Connector Pin Details................................................................................................ A - 18

A-3-1 DVI-I Connector Pin Details ................................................................................................... A - 18

A-3-2 DVI-D Connector Pin Details.................................................................................................. A - 19

A-4 RS-232C Connector Pin Details....................................................................................... A - 21

Restore and Repair Data ........................................................................................................7 - 30

BIOS Overview......................................................................................................................... A - 2

Index

NY-series Industrial Panel PC User's Manual (W555)

Manual Information

5 Installation

5 - 3

Y-series User's Manual (W555)

5-1 Unpack

5-1-1 Unpack Procedure

5-1

Unpack

This section provides details on how to unpack the Industrial Panel PC.

5-1-1

Unpack Procedure

1 Check the package for damage.

If there is any visible damage:

• Take photos of the package and save them.

• Inform your supplier immediately.

2 Open the package.

Ensure not to damage the contents.

3 Ensure that all items are present.

Additional Information

Refer to 5-1-2 Items Supplied with the Product

for the items supplied.

This section provides information about this manual.

Page Structure

The following page structure is used in this manual.

Manual Information

Note: This illustration is provided as a sample. It will not literally appear in this manual.

Item Explanation Item Explanation

A Level 1 heading E Special Information

B Level 2 heading F Manual name

C Level 3 heading G Page tab with the number of the main section

D Step in a procedure H Page number

NY-series Industrial Panel PC User's Manual (W555)

Manual Information

Special Information

Special information in this manual is classified as follows:

Precautions for Safe Use

Precautions on what to do and what not to do to ensure safe usage of the product.

Precautions for Correct Use

Precautions on what to do and what not to do to ensure proper operation and performance.

Additional Information

Additional information to read as required. This information is provided to increase understanding or make operation easier

Version Information

Information on differences in specifications and functionality between different versions.

NY-series Industrial Panel PC User's Manual (W555)

Terms and Conditions Agreement

Warranty and Limitations of Liability

Warranty

• Exclusive Warranty

Omron’s exclusive warranty is that the Products will be free from defects in materials and workman-

ship for a period of twelve months from the date of sale by Omron (or such other period expressed

in writing by Omron). Omron disclaims all other warranties, expressed or implied.

• Limitations

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF

THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based

on infringement by the Products or otherwise of any intellectual property right.

• Buyer Remedy

Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally

shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-com-

plying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal

to the purchase price of the non-complying Product; provided that in no event shall Omron be re-

sponsible for warranty, repair, indemnity or any other claims or expenses regarding the Products un-

less Omron’s analysis confirms that the Products were properly handled, stored, installed and main-

tained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any

Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall

not be liable for the suitability or unsuitability or the results from the use of Products in combination

with any electrical or electronic components, circuits, system assemblies or any other materials or

substances or environments. Any advice, recommendations or information given orally or in writing,

are not to be construed as an amendment or addition to the above warranty.

See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitations of Liability

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CON-

SEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY

WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,

WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Com-

panies exceed the individual price of the Product on which liability is asserted.

NY-series Industrial Panel PC User's Manual (W555)

Terms and Conditions Agreement

Application Considerations

Suitability for Use

Omron Companies shall not be responsible for conformity with any standards, codes or regulations

which apply to the combination of the Product in the Buyer

er’s request, Omron will provide applicable third party certification documents identifying ratings and

limitations of use which apply to the Product. This information by itself is not sufficient for a complete

determination of the suitability of the Product in combination with the end product, machine, system, or

other application or use. Buyer shall be solely responsible for determining appropriateness of the par-

ticular Product with respect to Buyer’s application, product or system. Buyer shall take application re-

sponsibility in all cases.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR

PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO

ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND IN-

STALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

’s application or use of the Product. At Buy-

Programmable Products

• Omron Companies shall not be responsible for the user’s programming of a programmable Product,

or any consequence thereof.

•

Omron Companies shall not be responsible for the operation of the user accessible operating sys-

tem (e.g. Windows, Linux), or any consequence thereof.

Disclaimers

Performance Data

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for

the user in determining suitability and does not constitute a warranty

Omron’s test conditions, and the user must correlate it to actual application requirements. Actual per-

formance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications

. It may represent the result of

Product specifications and accessories may be changed at any time based on improvements and oth-

er reasons. It is our practice to change part numbers when published ratings or features are changed,

or when significant construction changes are made. However

be changed without any notice. When in doubt, special part numbers may be assigned to fix or estab-

lish key specifications for your application. Please consult with your Omron’s representative at any

time to confirm actual specifications of purchased Product.

, some specifications of the Product may

NY-series Industrial Panel PC User's Manual (W555)

Terms and Conditions Agreement

Errors and Omissions

Information presented by Omron Companies has been checked and is believed to be accurate; how-

ever

, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.

NY-series Industrial Panel PC User's Manual (W555)

Safety Precautions

Definition of Precautionary Information

The following notation is used in this manual to provide precautions required to ensure safe usage of

the Industrial Panel PC. The safety precautions that are provided are extremely important to safety.

Always read and heed the information provided in all safety precautions.

The following notation is used.

Indicates a potentially hazardous situation which, if not avoid-

WARNING

Caution

ed, could result in death or serious injury

may be severe property damage.

Indicates a potentially hazardous situation which, if not avoid-

ed, may result in minor or moderate injury

. Additionally, there

, or property damage.

Symbols

The circle and slash symbol indicates operations that you must not do. The specific operation is shown in the circle and explained in text. This example indicates prohibiting disassembly

The triangle symbol indicates precautions (including warnings). The specific operation is shown in the triangle and explained in text. This example indicates a precaution for electric shock.

The triangle symbol indicates precautions (including warnings). The specific operation is shown in the triangle and explained in text. This example indicates a general precaution.

The filled circle symbol indicates operations that you must do. The specific operation is shown in the circle and explained in text. This example shows a general precaution for something that you must do.

NY-series Industrial Panel PC User's Manual (W555)

Warnings

Disassembly and Dropping

Do not attempt to disassemble, repair, or modify the product in any way. Doing so may result in malfunction or fire.

Installation

Always connect to a ground of 100 Ω or less when installing the product.

Safety Precautions

WARNING

Ensure that installation and post-installation checks of the product are performed by personnel in charge who possess a thorough understanding of the machinery to be installed.

Fail-safe Measures

Provide safety measures in external circuits to ensure safety in the system if an abnormality occurs due to malfunction of the product or due to other external factors af dents due to incorrect operation.

Emergency stop circuits, interlock circuit, limit circuits, and similar safety measures must be provided in external control circuits.

Unintended behavior may occur when an error occurs in internal memory of the product. As a countermeasure for such problems, external safety measures must be provided to ensure safe operation of the system.

The use of an uninterruptible power supply (UPS) allows normal operation to continue even if a momentary power failure occurs, possibly resulting in the reception of an erroneous signal from an external device affected by the momentary power failure. Take external fail-safe measures. Where necessary, monitor the power supply voltage on the system for external devices and use it as an interlock condition.

Do not use the input functions of the touchscreen in applications that involve human life, in applications that may result in serious injury stop switches.

fecting operation. Not doing so may result in serious acci-

, or for emergency

NY-series Industrial Panel PC User's Manual (W555)

Safety Precautions

Actual Operation

Security setting adjustments should only be performed by the engineer in charge that possesses a thorough understanding of the security settings. Selecting non-recommended security settings can put your system at risk.

Changing BIOS information is only allowed for the engineer in charge that possesses a thorough understanding of the BIOS settings because it can change the behavior of the product.

Water or other liquid present on the touchscreen surface may create false touch behavior and unexpected operation. Wipe away the liquid on the touchscreen before operation.

NY-series Industrial Panel PC User's Manual (W555)

Cautions

Industrial PC Platform Product

Non-isolated

Device

Non-isolated

Interface

24 VDC

0 VDC

Wiring

The product has an internal non-isolated DC power supply. Circuit ground (0 VDC) and frame ground are connected together. When connecting a nonisolated device or a non-isolated interface to the product, take appropriate actions to avoid communication failures or damage to the mentioned ports.

Safety Precautions

Caution

Never ground the 24 VDC side of the power supply. This may cause a short circuit.

NY-series Industrial Panel PC User's Manual (W555)

Precautions for Safe Use

Disassembly, Dropping, Mounting, Installation and Storage

• Do not drop the product or subject it to abnormal vibration or shock. Doing so may result in product

malfunction or burning.

• When unpacking, check carefully for any external scratches or other damages. Also, shake the

product gently and check for any abnormal sound.

• Always use the devices specified in the relevant manual.

• The product must be installed in a control panel.

• Always install equipment that is included in the product specifications. Not doing so may result in

failure or malfunction.

• If the storage period exceeds 6 months, check the performance of the Fan Unit before production

starts.

• Install the product in the correct orientation and temperature according to the specifications in the

manual to prevent overheating. Not doing so may result in malfunction.

• When connecting peripheral devices to the product, ensure sufficient countermeasures against

noise and static electricity during installation of the peripheral devices.

• The mounting panel must be between 1.6 and 6.0 mm thick. Tighten the Mounting Brackets evenly

to a torque of 0.6 Nm to maintain water and dust resistance. If the tightening torque exceeds the

specified value, or the tightening is not even, deformation of the front panel may occur. Additionally,

make sure the panel is not dirty or warped and that it is strong enough to hold the product.

• Do not let metal particles enter the product when preparing the panel. Do not allow wire clippings,

shavings, or other foreign material to enter any product. Otherwise, the product burning, failure, or

malfunction may occur. Cover the product or take other suitable countermeasures, especially during

wiring work.

Wiring

• Follow the instructions in the manual to correctly perform connector wiring and insertion. Double-

• Always ensure connectors, cables, PCIe Cards and Storage devices are completely locked in place

• Before you connect a computer to the product, disconnect the power supply plug of the computer

• Do not bend or pull the cables beyond normal limit. Do not place heavy objects on top of the cables

• Always use power supply wires with sufficient wire diameters to prevent voltage drop and burning.

• Be sure that all mounting bracket screws and cable connector screws are tightened to the torque

• Use crimp terminals for wiring.

check all wiring and connector insertion before turning ON the power supply.

to prevent accidental disconnection.

from the AC outlet. Also, if the computer has an FG terminal, make the connections so that the FG

terminal has the same electrical potential as the product. A difference in electrical potential between

the computer and the product may cause failure or malfunction.

or other wiring lines. Doing so may break the cables.

Make sure that the current capacity of the wire is sufficient. Otherwise, excessive heat may be gen-

erated. When cross-wiring terminals, the total current for all the terminals will flow in the wire. When

wiring cross-overs, make sure that the current capacity of each of the wires is not exceeded.

specified in the relevant manuals. The loose screws may result in fire or malfunction.

NY-series Industrial Panel PC User's Manual (W555)

Precautions for Safe Use

• Observe the following precautions to prevent broken wires.

•

When you remove the sheath, be careful not to damage the conductor.

• Connect the conductor without twisting the wires.

• Do not weld the conductors. Doing so may cause the wires to break with vibration.

Power Supply Design and Turning ON/OFF the Power Supply

• Always use a power supply that provides power within the rated range.

Do not perform a dielectric strength test.

•

• Always use the recommended uninterruptible power supply (UPS) to prevent data loss and other

system file integrity issues caused by unexpected power interruption. Back up the system files in the

planned way to prevent data loss and other system file integrity issues caused by incorrect opera-

tion.

• Use an Omron S8BA UPS with the correct revision number to prevent improper system shutdown.

• Power ON after the DVI cable is connected between the product and an external monitor.

• Always check the power supply and power connections before applying power. Incorrect power con-

nections can damage the product or cause burning.

• Always turn OFF the power supply to system before you attempt any of the following.

• Inserting or removing PCIe Cards

• Connecting cables

• Connecting or disconnecting the connectors

• Wiring the system

• Replacing or removing the HDD/SSD

• Replacing the Battery

• Replacing the Fan Unit

Actual Operation

• Choose an operating system password that is not obvious to prevent unauthorized access.

Remember the OS user name and password. The product is inaccessible without it.

•

• Before operating the system , please make sure the appropriate software is installed and config-

ured. Doing so may prevent unexpected operation.

• Install all updates and ensure the browser stays up-to-date.

• Install all updates and ensure the firewall stays up-to-date.

• Make sure that your OS environment is protected against malicious software and viruses.

• Install all updates and ensure virus definitions stay up-to-date.

• Do not remove the fan cover while the power is ON. Contact with a rotating fan may result in injury.

• Virtual memory settings can affect the performance of the system. Disable the paging file after in-

stallation of applications or updates.

• Correctly perform wiring and setting, and ensure that the shutdown by the UPS can be executed.

• Always use the SMART monitoring feature for storage devices that do not comply to the Omron

Storage Device Specifications. Monitor the operating temperature and vibrations to ensure they stay

within the environmental specifications of the storage device.

NY-series Industrial Panel PC User's Manual (W555)

Precautions for Safe Use

Operation

• Do not carry out the following operations when accessing a USB device or an SD Memory Card.

Turn OFF the power supply of the product.

•

• Press the Power Button of the product.

• Remove a USB device or SD memory card.

• Do not attempt to remove or touch the fan unit while the product is powered ON or immediately after

the power supply is turned OFF. If you attempt to replace the fan unit then, there is a risk of personal

injury due to hot or rotating parts.

• Press the power button for several seconds to force the product shutdown. Always back up files in

the planned way to prevent data loss or system file corruption.

• Do not touch any product housing when power is being supplied or immediately after the power sup-

ply is turned OFF. Doing so may result in burn injury.

• Confirm the safety of the system before using the touch panel.

• Signals from the touchscreen may not be entered if the touchscreen is pressed consecutively at

high speed. Only move on to the next operation after confirming that the product has detected the

previous input of the touchscreen.

• Do not accidentally press the touchscreen when the backlight is not lit or when the display does not

appear. Confirm the safety of the system before pressing the touchscreen.

• Do not use hard or pointed objects to operate or scrub the touchscreen, otherwise the surface of the

touchscreen may be damaged.

General Communications

• Separate the machine network segment from the office network to avoid communication failures.

Battery Replacement

• Dispose of any Battery that has been dropped on the floor or otherwise subjected to excessive

shock. Batteries that have been subjected to shock may leak if they are used.

UL standards require that only an experienced engineer replace the Battery. Make sure that an ex-

•

perienced engineer is in charge of Battery replacement.

• The Battery may leak, rupture, heat, or ignite. Never short-circuit, charge, disassemble, heat, or in-

cinerate the Battery or subject it to strong shock.

Cleaning, Maintenance and Disposal

• Do not use corrosive substances to clean the product. Doing so may result in the failure or malfunc-

tion.

Periodically check the installation conditions in applications where the product is subject to contact

•

with oil or water.

• As the rubber gasket will deteriorate, shrink, or harden depending on the operating environment, pe-

riodical inspection is necessary.

• Dispose of the product and batteries according to local ordinances as they apply.

NY-series Industrial Panel PC User's Manual (W555)

Precautions for Safe Use

• The following information must be displayed for all products that contain primary lithium batteries

with a perchlorate content of 6 ppb or higher when shipped to or transported through the State of

California, USA.

Perchlorate Material - special handling may apply

See http://www.dtsc.ca.gov/hazardouswaste/perchlorate.

• The product contains a lithium battery with a perchlorate content of 6ppb or higher. When exporting

an end product containing the product to or shipping through California, USA, label all packing and

shipping containers appropriately.

NY-series Industrial Panel PC User's Manual (W555)

Precautions for Correct Use

Storage, Installation and Mounting

• Do not operate or store the product in the following locations. Operation may stop or malfunctions

may occur.

• Locations subject to direct sunlight

• Locations subject to temperatures or humidity outside the range specified in the specifications

• Locations subject to condensation as the result of severe changes in temperature

• Locations subject to corrosive or flammable gases

• Locations subject to dust (especially iron dust) or salts

• Locations subject to exposure to water, oil or chemicals

• Locations subject to shock or vibration

• Locations outdoors subject to direct wind and rain

• Locations subject to strong ultraviolet light

• Always install the product with sufficient surrounding space to allow for adequate heat dissipation

and cooling effect.

• Take appropriate and sufficient countermeasures when installing the product in the following loca-

tions

• Locations subject to strong, high-frequency noise

• Locations subject to static electricity or other forms of noise

• Locations subject to strong electromagnetic fields

• Locations subject to possible exposure to radioactivity

• Locations close to power lines

• Always touch a grounded piece of metal to discharge static electricity from your body before starting

an installation or maintenance procedure.

• Insert USB devices and PCIe devices correctly to avoid the burning, failure or malfunction.

• Execute a backup of the product before PCIe addition or replacement. Be sure that the PCIe device

works correctly before you use them for actual operation. PCIe devices and their related software

may cause an OS boot failure or crash.

• The backlight has a finite life and if that is exceeded, the product may fail or malfunction. Check the

brightness periodically and if necessary, replace the product.

• Ensure the selected operating system supports ACPI to enable operating system shutdown using

the power button.

• Download the enhanced Video Driver from the OMRON Download Center and install it on the Indus-

trial PC.

Wiring

• Always ensure the rated supply voltage is connected to the product.

• Do not allow wire clippings, shavings, or other foreign material to enter the product. Otherwise, burn-

ing, failure, or malfunction may occur. Cover the product or take other suitable countermeasures, es-

pecially during wiring work.

• Do not use cables exceeding the maximum specified length. Doing so may cause malfunction.

• Do not connect an AC power supply to the DC power connector.

NY-series Industrial Panel PC User's Manual (W555)

Actual Operation and Operation

• After an OS update or a peripheral device driver update for the product is executed, the product be-

havior might be dif

• Always create a Windows System Repair Disk using Windows Backup and Restore to recover the

HDD/SSD configuration if necessary.

• Ensure the fan is operational to provide adequate cooling while the power is turned ON.

• HDD and SSD storage devices, SD Memory Cards, power buttons, fan units and batteries have fi-

nite lives and if those are exceeded, the product may fail or malfunction.

• Always monitor the fan status. If a fan is used beyond its service life, the Low Revolution Speed

warning message is displayed and the product overheating may occur.

• Always monitor the battery warning message. When a battery has low voltage, the system time will

be lost.

• The touchscreen supports 5 simultaneous touches. When the number of touches is exceeded, not

all touch points will be detected.

• The capacitive touchscreen reacts to contact on its surface. Accidental touching the surface of the

touchscreen may cause unintended behavior.

• You can operate the touchscreen even when you wear some gloves. Confirm that you can correctly

operate the touchscreen while wearing gloves prior to actual operation.

• Do not turn ON the power supply to the product when a part of a human body or a conductive object

is touching the surface of the touchscreen. Doing so will cause the touchscreen functionality to be

disabled. Remove the conductive object and cycle the power supply to restore the touchscreen

functionality.

• If the product experiences a sudden loss of power or disconnecting the cable while saving a setting

or transfer of data is underway, the changes may not be stored and unexpected behavior may occur.

• Ensure that available software checks are performed by personnel in charge who possess a thor-

ough understanding of the software.

• Diagnostic information is not available when the Industrial PC Support Utility is not installed.

ferent. Confirm that operation is correct before you start actual operation.

Precautions for Correct Use

Battery Replacement

• Turn ON the power after replacing the battery for a product that has been unused for an extended

period of time. Leaving the product unused without turning ON the power even once after the battery

is replaced may result in a shorter battery life.

Make sure to use a battery of the correct type, install the battery properly.

•

• Apply power for at least five minutes before changing the battery. Mount a new battery within five

minutes after turning OFF the power supply. If power is not supplied for at least five minutes, the

clock data may be lost. Check the clock data after changing the battery.

SD Memory Cards

• Insert an SD Memory Card completely and ensure it is in place.

Cleaning and Maintenance

• Do not use corrosive substances to clean the product.

Turn OFF the product or disable the touchscreen for cleaning with water.

•

NY-series Industrial Panel PC User's Manual (W555)

Regulations and Standards

Conformance to EU Directives

The Industrial Panel PC complies with EU Directives. To ensure that the machine or device in which

the Industrial Panel PC is used complies with EU Directives, the following precautions must be ob-

served:

• The Industrial Panel PC must be installed within a control panel.

• The Industrial Panel PC that complies with EU Directives also conforms to the Common Emission

Standard. Radiated emission characteristics (10-m regulations) may vary depending on the configu-

ration of the control panel used, other devices connected to the control panel, wiring, and other con-

ditions. You must therefore confirm that the overall machine or equipment in which the Industrial

Panel PC is used complies with EU Directives.

• This is a Class A product (for industrial environments). In a residential environment, it may cause

radio interference. If radio interference occurs, the user may be required to take appropriate meas-

ures.

Applicable Directive

EMC Directive

OMRON devices that comply with EU Directives also conform to the related EMC standards so that

they can be more easily built into other devices or the overall machine. The actual products have been

checked for conformity to EMC standards.

Applicable EMC (Electromagnetic Compatibility) standards are as follows:

• EMS (Electromagnetic Susceptibility): EN 61131-2

• EMI (Electromagnetic Interference): EN 61131-2 (Radiated emission: 10-m regulations)

Whether the products conform to the standards in the system used by the customer, however, must be

checked by the customer. EMC-related performance of the OMRON devices that comply with EU Di-

rectives will vary depending on the configuration, wiring, and other conditions of the equipment or con-

trol panel on which the OMRON devices are installed. The customer must, therefore, perform the final

check to confirm that devices and the overall machine conform to EMC standards.

NY-series Industrial Panel PC User's Manual (W555)

Conformance to KC Standards

Observe the following precaution if you use Industrial PC Platform products in Korea.

Class A Device (Broadcasting Communications Device for Office Use).

This device obtained EMC registration for of

other than homes.

Sellers and/or users need to take note of this.

fice use (Class A), and it is intended to be used in places

Conformance to UL and CSA Standards

Some Industrial PC Platform products comply with UL and CSA standards. If you use a product that

complies with UL or CSA standards and must apply those standards to your machinery or devices,

refer to this manual. This manual provides the application conditions for complying with the standards.

If the product is used in a manner not specified in the Instruction Sheet or in the product manuals then

the protection provided by the equipment may be impaired.

Regulations and Standards

Software Licenses and Copyrights

This product incorporates certain third party software. The license and copyright information associat-

ed with this software is available at http://www

.fa.omron.co.jp/nj_info_e/.

NY-series Industrial Panel PC User's Manual (W555)

Related Manuals

The following manuals are related. Use these manuals for reference.

Related Products Manuals

Manual

name

UPS S8BA User's Manual

UPS Setting Utility Instruction Manual

UPS Power Attendant Lite for Windows User's Manual

Cat.

No.

U702 S8BA Learning the information

---

--- S8BA Learning the information

Model num-

bers

• SB8A

• BU-2R

Application Description

that is necessary to use the Uninterruptible Power Supply (UPS) Unit.

Learning the information that is necessary to connect the UPS and to configure all settings.

that is necessary to use the software to monitor test and control the UPS and to configure all settings.

An introduction to the UPS is provided along with the following information:

• Overview

• Preparation

• Installation and Connection

• Check and Start Operation

• Maintenance and Inspection

• Shutdown Processing

• I/O Signal Functions

• T

roubleshooting

An introduction to the UPS Setting Utility is provided along with the following information:

• Overview

• Operating Environment

• Software License Agreement

• Connect

• Use the UPS Setting Utility

• Setting Details

An introduction to the software is provided along with the following information:

• Overviews

• Connection and Installation

• The Simple Usage and Operation Test

• Settings

NY-series Industrial Panel PC User's Manual (W555)

Industrial Monitor Manual

This table contains the related manual of the Industrial Monitor.

Related Manuals

Manual

name

Industrial Monitor

’s

User Manual

Cat.

No.

W554

Model num-

bers

• NYM15W

C100£

• NYM12W-

C100£

Application Description

Learning all basic information

about the Industrial Monitor includes introductory information with features, hardware overview, specifications, mounting, wiring, connecting, operating and maintaining the Industrial Monitor.

. This

An introduction to the Industrial Monitor is provided along with the following information:

• Overview

• Hardware

• Software

• Specifications

• Installation

• Operating Procedures

• Maintenance

NY-series Industrial Panel PC User's Manual (W555)

Terminology and Abbreviations

Industrial PC Platform

Term / Abbreviation Description

Industrial PC Platform An integrated range of OMRON products designed for use in any industrial applica-

tion that will benefit from advanced PC technology

Industrial Monitor An industrial monitor with a touchscreen as the user interface designed to work in

industrial environments

Industrial Panel PC An industrial PC with an integrated touchscreen monitor designed to work in indus-

trial environments

Industrial Box PC A box-shaped industrial PC including an OS designed to work in industrial environ-

ments

IPC Industrial PC

Sysmac OMRON’s brand name of the product family for the industrial automation equip-

ment

Hardware

Term / Abbreviation Description

BMC Board Management Controller

CPU A Central Processing Unit is the hardware within a computer that executes the in-

DVI Digital Visual Interface

DVI-D A Digital Visual Interface with only Digital signals

DVI-I A Digital Visual Interface with Analog and Digital signals

Ethernet A network communication protocol used in TCP/IP network

HDD A Hard Disk Drive storage device

HMI A Human Machine Interface that facilitates machine operation and control

iMLC Industrial Multi-Level Cell type of SSD storage device

PCIe The PCI Express is a high-speed computer bus standard called Peripheral Compo-

SATA The Serial AT Attachment is a serial bus interface primarily used with mass storage

SLC Single-Level Cell type of SSD storage device

SO-DIMM Small Outline Dual Inline Memory Module

SSD A Solid State Drive storage device

USB Universal Serial Bus

structions of a computer program

nent Interconnect Express

devices such as hard disk drives

NY-series Industrial Panel PC User's Manual (W555)

Software

Term / Abbreviation Description

ACPI Advanced Configuration and Power Interface protocol for operating systems

API Application Programming Interface

BIOS Basic Input Output System. The first software run by a PC when powered on.

Developer Any person involved with the development of software

DST Daylight Saving Time

EWF Enhanced Write Filter

FBWF File-Based Write Filter

IIoT Industrial Internet of Things

Linux An open source Operating System

MBR Master Boot Record

Merge module A module providing a standard method by which developers deliver shared Win-

MSDN Microsoft Developer Network

NUI Natural User Interface

OS Operating System

PLC Programmable Logic Controller

RTOS Realtime Operating System

SDK Software Development Kit

TCP/IP Transmission Control Protocol / Internet Protocol, a core member of the Internet

TPM Trusted Platform Module

VxWorks A Realtime Operating System designed by Wind River

Windows An Operating System designed by Microsoft

Terminology and Abbreviations

dows installer components and setup logic to their applications

protocol suite

NY-series Industrial Panel PC User's Manual (W555)

W555-E2-03

Cat. No.

Revision code

Revision History

A manual revision code appears as a suffix to the catalog number on the front and back covers of the

manual.

Revision code Date Revised content

03 May 2017

02 December 2016

01 August 2016 First release

• Added operating system Windows 10 IoT Enterprise L

• Added Storage Device Considerations

• Modified UPS configuration procedure

• Several minor modifications

• UL implementation

• KC Standard implementation

• Minor modifications

TSB

NY-series Industrial Panel PC User's Manual (W555)

+ 234 hidden pages

Omron NYP25-*-12 SERIES, NYP17-*-13 SERIES, NYP1C-*-12 SERIES, NYP25-*-13 SERIES, NYP1C-*-11 SERIES User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Introduction

Intended Audience

Applicable Products

CONTENTS

Manual Information

Page Structure

Special Information

Terms and Conditions Agreement

Warranty and Limitations of Liability

Application Considerations

Disclaimers

Safety Precautions

Definition of Precautionary Information

Symbols

Warnings

Cautions

Precautions for Safe Use

Disassembly, Dropping, Mounting, Installation and Storage

Wiring

Power Supply Design and Turning ON/OFF the Power Supply

Actual Operation

Operation

General Communications

Battery Replacement

Cleaning, Maintenance and Disposal

Precautions for Correct Use

Storage, Installation and Mounting

Wiring

Actual Operation and Operation

Battery Replacement

SD Memory Cards

Cleaning and Maintenance

Regulations and Standards

Conformance to EU Directives

Conformance to KC Standards

Conformance to UL and CSA Standards

Software Licenses and Copyrights

Related Manuals

Related Products Manuals

Industrial Monitor Manual

Terminology and Abbreviations

Industrial PC Platform

Hardware

Software

Revision History

Omron NYP25--12 SERIES, NYP17--13 SERIES, NYP1C--12 SERIES, NYP25--13 SERIES, NYP1C-*-11 SERIES User Manual