Omron NYP25--12 SERIES, NYP17--13 SERIES, NYP1C--12 SERIES, NYP25--13 SERIES, NYP1C-*-11 SERIES User Manual

...

Download

Page 1

Industrial PC Platform

NY-series

Industrial Panel PC

User's Manual

NYP17-£ NYP17-£-12££ NYP17-£-13££ NYP25-£-11££ NYP25-£-12££ NYP25-£-13££ NYP1C-£-11££ NYP1C-£-12££ NYP1C-£-13££

-1

££

Industrial Panel PC

W555-E2-03

Page 2

NOTE

transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or other-

wise, without the prior written permission of OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover,

because OMRON is constantly striving to improve its high-quality products, the information contained

in this manual is subject to change without notice. Every precaution has been taken in the preparation

of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is

any liability assumed for damages resulting from the use of the information contained in this publica-

tion.

Trademarks

• Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan

and other countries for OMRON factory automation products.

• Windows is a registered trademark of Microsoft Corporation in the USA and other countries.

• The SD and SDHC logos are trademarks of SD-3C, LLC.

• Intel, the Intel Logo, Celeron and Intel Core are trademarks of Intel Corporation in the U.S. and/or

other countries.

Other company names and product names in this document are the trademarks or registered trade-

marks of their respective companies.

Copyrights

Microsoft product screen shots reprinted with permission from Microsoft Corporation.

Page 3

Introduction

Thank you for purchasing the Industrial Panel PC.

This manual contains information that is necessary to use the Industrial Panel PC (hereafter also

named as Panel PC). Please read this manual and make sure you understand the functionality and

performance of the Panel PC before attempting to use it.

Keep this manual in a safe place where it will be available for reference during operation.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-

tems (an electrical engineer or the equivalent).

• Personnel in charge of introducing Factory Automation systems.

• Personnel in charge of designing Factory Automation systems.

• Personnel in charge of installing and maintaining Factory Automation systems.

• Personnel in charge of managing Factory Automation systems and facilities.

Introduction

Applicable Products

This manual covers following Industrial Panel PC products:

Product Model

Industrial Panel PC, 15.4 inch

Industrial Panel PC, 12.1 Inch

• NYP17-£1

• NYP17-£12££-15WC100£

• NYP17-£13££-15WC100£

• NYP25-£11££-15WC100£

• NYP25-£12££-15WC100£

• NYP25-£13££-15WC100£

• NYP1C-£11££-15WC100£

• NYP1C-£12££-15WC100£

• NYP1C-£13££-15WC100£

• NYP17-£1

• NYP17-£12££-12WC100£

• NYP17-£13££-12WC100£

• NYP25-£11££-12WC100£

• NYP25-£12££-12WC100£

• NYP25-£13££-12WC100£

• NYP1C-£11££-12WC100£

• NYP1C-£12££-12WC100£

• NYP1C-£13££-12WC100£

1££-15WC100£

1££-12WC100£

Additional Information

Refer to 1-4 Product Configuration on page 1 - 5 for configuration details.

NY-series Industrial Panel PC User's Manual (W555)

Page 4

CONTENTS

Introduction .............................................................................................................. 1

Intended Audience

Applicable Products ......................................................................................................................................... 1

Manual Information.................................................................................................. 7

Page Structure.................................................................................................................................................7

Special Information .......................................................................................................................................... 8

Terms and Conditions Agreement.......................................................................... 9

Warranty and Limitations of Liability ................................................................................................................ 9

Application Considerations ............................................................................................................................10

Disclaimers ....................................................................................................................................................10

Safety Precautions................................................................................................. 12

Definition of Precautionary Information.......................................................................................................... 12

Symbols ......................................................................................................................................................... 12

Warnings........................................................................................................................................................ 13

Cautions......................................................................................................................................................... 15

...........................................................................................................................................1

Precautions for Safe Use ...................................................................................... 16

Disassembly, Dropping, Mounting, Installation and Storage .........................................................................16

Wiring............................................................................................................................................................. 16

Power Supply Design and Turning ON/OFF the Power Supply.....................................................................17

Actual Operation ............................................................................................................................................ 17

Operation ....................................................................................................................................................... 18

General Communications ..............................................................................................................................18

Battery Replacement .....................................................................................................................................18

Cleaning, Maintenance and Disposal ............................................................................................................18

Precautions for Correct Use ................................................................................. 20

Storage, Installation and Mounting ................................................................................................................20

Wiring............................................................................................................................................................. 20

Actual Operation and Operation ....................................................................................................................21

Battery Replacement .....................................................................................................................................21

SD Memory Cards .........................................................................................................................................21

Cleaning and Maintenance ............................................................................................................................ 21

Regulations and Standards .................................................................................. 22

Conformance to EU Directives ......................................................................................................................22

Conformance to KC Standards......................................................................................................................23

Conformance to UL and CSA Standards.......................................................................................................23

Software Licenses and Copyrights ................................................................................................................23

Related Manuals..................................................................................................... 24

Related Products Manuals............................................................................................................................. 24

Industrial Monitor Manual ..............................................................................................................................25

Terminology and Abbreviations ........................................................................... 26

Industrial PC Platform ...................................................................................................................................26

Hardware ......................................................................................................................................................26

Software......................................................................................................................................................... 27

Revision History..................................................................................................... 28

Sections in this Manual ......................................................................................... 29

NY-series Industrial Panel PC User's Manual (W555)

Page 5

Section 1 Overview

1-1 Intended Use .......................................................................................................................1 - 2

1-2

Hardware Features...............................................................................................................1 - 3

1-3 ID Information Label ............................................................................................................1 - 4

1-4 Product Configuration.........................................................................................................1 - 5

1-5 Industrial PC Platform Overview ........................................................................................1 - 6

1-5-1 Industrial Monitor ......................................................................................................................1 - 6

1-5-2 Industrial Box PC .....................................................................................................................1 - 7

1-5-3 Industrial Panel PC ..................................................................................................................1 - 7

Section 2 Hardware

2-1 Component Names and Functions.....................................................................................2 - 2

2-1-1

2-1-2 Back and Bottom of the Industrial Panel PC .............................................................................2 - 3

2-2 LED Indicators......................................................................................................................2 - 5

2-2-1 Bottom LED Indicators ..............................................................................................................2 - 5

2-2-2 Front LED and LED Indicator ....................................................................................................2 - 7

2-3 Power Button........................................................................................................................2 - 9

2-4 Drive Bays ..........................................................................................................................2 - 10

2-5 SD Memory Card Slot ........................................................................................................ 2 - 11

2-6 PCIe Card Slot .................................................................................................................... 2 - 12

2-7 Connectors ......................................................................................................................... 2 - 13

2-7-1 Power Connector ....................................................................................................................2 - 13

2-7-2 I/O Connector..........................................................................................................................2 - 13

2-7-3 USB Connectors .....................................................................................................................2 - 14

2-7-4 Ethernet Connectors ...............................................................................................................2 - 15

2-7-5 DVI Connector.........................................................................................................................2 - 15

2-7-6 RS-232C Connector (Optional) ...............................................................................................2 - 16

2-7-7 DVI-D Connector (Optional) ....................................................................................................2 - 16

2-8 Spare Parts ......................................................................................................................... 2 - 17

2-8-1 Battery.....................................................................................................................................2 - 17

2-8-2 Fan Unit...................................................................................................................................2 - 17

2-8-3 Accessory Kit ..........................................................................................................................2 - 18

2-9 Optional Hardware ............................................................................................................. 2 - 19

2-9-1 SD Memory Cards...................................................................................................................2 - 19

2-9-2 USB Flash Drives....................................................................................................................2 - 19

2-9-3 Storage Devices......................................................................................................................2 - 20

2-9-4 DVI Cables ..............................................................................................................................2 - 21

2-9-5 USB Type-A to USB Type-B Cables .......................................................................................2 - 21

2-9-6 Industrial Monitor ....................................................................................................................2 - 22

2-9-7 Power Supply ..........................................................................................................................2 - 22

2-9-8 UPS.........................................................................................................................................2 - 23

2-9-9 UPS Communication Cable ....................................................................................................2 - 23

Front and Top of the Industrial Panel PC ..................................................................................2 - 2

CONTENTS

Section 3 Software

3-1 Windows Operating System ...............................................................................................3 - 2

3-1-1 Determine Your Version of the Windows Operating Systems ...................................................3 - 2

3-1-2 Determine Your Ethernet Ports .................................................................................................3 - 3

3-2 Support Software ................................................................................................................. 3 - 4

3-2-1 Overview IPC Support Software for Windows...........................................................................3 - 4

NY-series Industrial Panel PC User's Manual (W555)

Page 6

CONTENTS

3-2-2 Installed IPC Support Software .................................................................................................3 - 4

3-2-3

3-2-4 Industrial Monitor Utility ............................................................................................................3 - 9

3-2-5 Industrial Monitor Brightness Utility ........................................................................................3 - 12

3-2-6 Rescue Disk Creator ...............................................................................................................3 - 14

3-2-7 Industrial PC Tray Utility .........................................................................................................3 - 18

3-2-8 Power Attendant Lite Utility .....................................................................................................3 - 21

Industrial PC Support Utility .....................................................................................................3 - 5

3-3 Software for Developers....................................................................................................3 - 24

3-3-1 Overview IPC Developer Software for Windows.....................................................................3 - 24

3-3-2 Industrial PC System API .......................................................................................................3 - 25

3-3-3 Industrial Monitor API .............................................................................................................3 - 26

Section 4 Specifications

4-1 General Specifications .......................................................................................................4 - 2

4-1-1

4-1-2 General Electrical Specifications...............................................................................................4 - 3

4-1-3 Power Consumption Specifications...........................................................................................4 - 3

4-1-4 CPU Specifications ...................................................................................................................4 - 6

4-1-5 Memory Specifications ..............................................................................................................4 - 7

4-1-6 Storage Device Specifications ..................................................................................................4 - 8

4-1-7 PCIe Card Specifications ........................................................................................................4 - 10

4-2 Connector Specifications .................................................................................................4 - 12

4-2-1 Power Connector Specifications .............................................................................................4 - 12

4-2-2 I/O Connector Specifications...................................................................................................4 - 13

4-2-3 USB Connector Specifications ................................................................................................4 - 17

4-2-4 Ethernet Connector Specifications..........................................................................................4 - 18

4-2-5 DVI Connector Specifications .................................................................................................4 - 19

4-2-6 DVI-D Connector Specifications..............................................................................................4 - 21

4-2-7 RS-232C Connector Specifications.........................................................................................4 - 22

4-3 Software Specifications ...................................................................................................4 - 23

4-3-1 Available Windows Operating Systems...................................................................................4 - 23

4-3-2 Supported Languages.............................................................................................................4 - 23

4-4 Display Specifications.......................................................................................................4 - 24

4-5 Environmental Specifications...........................................................................................4 - 25

4-5-1 Operation Environment Specifications ....................................................................................4 - 25

4-5-2 Temperature and Humidity Specifications...............................................................................4 - 26

4-5-3 Recycling Specifications .........................................................................................................4 - 30

Dimensions and Weight ............................................................................................................4 - 2

Section 5 Installation

5-1 Unpack .................................................................................................................................. 5 - 3

5-1-1

5-1-2 Items Supplied ..........................................................................................................................5 - 4

5-2 Install Options ...................................................................................................................... 5 - 5

5-2-1 Install a Drive ............................................................................................................................5 - 5

5-2-2 Install the PCIe Card .................................................................................................................5 - 9

5-3 Mount ..................................................................................................................................5 - 14

5-3-1 Installation Method in Control Panels......................................................................................5 - 14

5-3-2 Product Orientation .................................................................................................................5 - 15

5-3-3 Temperature ............................................................................................................................5 - 16

5-3-4 Humidity ..................................................................................................................................5 - 18

5-3-5 Vibration and Shock ................................................................................................................5 - 18

5-3-6 Atmosphere.............................................................................................................................5 - 19

5-3-7 Electrical Environment ............................................................................................................5 - 19

5-3-8 Prepare the Mounting Surface ................................................................................................5 - 24

5-3-9 Mount the Panel PC ................................................................................................................5 - 26

Unpack Procedure ....................................................................................................................5 - 3

NY-series Industrial Panel PC User's Manual (W555)

Page 7

CONTENTS

5-4 Wire .....................................................................................................................................5 - 27

5-4-1

5-4-2 Ground ....................................................................................................................................5 - 28

5-4-3 Wire the Power Connector ......................................................................................................5 - 34

5-4-4 Wire the I/O Connector ...........................................................................................................5 - 37

5-5 Connect...............................................................................................................................5 - 40

5-5-1 Connector Identification ..........................................................................................................5 - 41

5-5-2 Connection Procedure ............................................................................................................5 - 42

5-6 Initial Power ON .................................................................................................................5 - 44

5-6-1 Initial Power ON Procedure.....................................................................................................5 - 44

5-6-2 Windows Startup First Time ....................................................................................................5 - 46

5-7 Install Software ..................................................................................................................5 - 48

5-7-1 Internet Browser......................................................................................................................5 - 48

5-7-2 Firewall....................................................................................................................................5 - 49

5-7-3 Anti-virus Software ..................................................................................................................5 - 49

5-7-4 Drivers and Custom Software .................................................................................................5 - 50

5-7-5 Activate Windows....................................................................................................................5 - 50

5-7-6 Customize Windows................................................................................................................5 - 50

5-8 Connect UPS ......................................................................................................................5 - 51

5-8-1 Connect UPS Using the USB Connector ................................................................................5 - 52

5-8-2 Connect UPS Using the I/O Connector...................................................................................5 - 54

5-9 Create Backup and Repair Data .......................................................................................5 - 57

5-9-1 Create a New Rescue Disk with the Rescue Disk Creator .....................................................5 - 58

5-9-2 Create a Windows System Repair Disk and a Windows Backup............................................5 - 60

Wiring Warnings and Cautions................................................................................................5 - 27

Section 6 Operating Procedures

6-1 Touchscreen Operation.......................................................................................................6 - 2

6-2

Power ON..............................................................................................................................6 - 3

6-2-1 Power ON Using the Power Button...........................................................................................6 - 3

6-2-2 Power ON Using the Power ON/OFF Input...............................................................................6 - 3

6-2-3 Auto Power ON .........................................................................................................................6 - 4

6-3 Power OFF ............................................................................................................................ 6 - 5

6-3-1 Power OFF Using the Power Button .........................................................................................6 - 5

6-3-2 Power OFF Using Windows Shut Down ...................................................................................6 - 5

6-3-3 Power OFF Using the Power ON/OFF Input.............................................................................6 - 6

6-3-4 Forced Power OFF Using the Power Button.............................................................................6 - 6

6-4 React to Product Messages ................................................................................................ 6 - 7

6-5 React to Windows Messages..............................................................................................6 - 8

Section 7 Maintenance

7-1 Preventive Maintenance ...................................................................................................... 7 - 2

7-1-1

7-1-2 Clean the Touchscreen Surface ................................................................................................7 - 3

7-1-3 Clean the Panel PC...................................................................................................................7 - 3

7-1-4 Check the Gasket Seal .............................................................................................................7 - 4

7-1-5 Keep Software Updated ............................................................................................................7 - 4

7-1-6 Create Backup and Repair Data ...............................................................................................7 - 5

7-1-7 Check the Backup and Repair Media...................................................................................... 7 - 11

7-2 Corrective Maintenance ....................................................................................................7 - 13

7-2-1 Warning and Error Messages..................................................................................................7 - 13

7-2-2 Remove the Cover ..................................................................................................................7 - 15

7-2-3 Replace the Fan Unit ..............................................................................................................7 - 16

7-2-4 Replace the Battery.................................................................................................................7 - 18

7-2-5 Replace a Drive.......................................................................................................................7 - 20

Preventive Maintenance Schedule............................................................................................7 - 2

NY-series Industrial Panel PC User's Manual (W555)

Page 8

CONTENTS

7-2-6 Replace the PCIe Card ...........................................................................................................7 - 25

7-2-7

7-2-8 Allocate a Drive in Windows....................................................................................................7 - 37

7-2-9 Windows Event Viewer............................................................................................................7 - 38

7-2-10 Windows Low on Memory .......................................................................................................7 - 40

7-2-11 Windows Blue Screens ...........................................................................................................7 - 41

7-2-12 Correct Display Functionality when Nothing is Displayed .......................................................7 - 41

7-2-13 Correct Touchscreen Functionality..........................................................................................7 - 42

Appendices

A-1 BIOS ..................................................................................................................................... A - 2

A-1-1

A-1-2 BIOS - Main.............................................................................................................................. A - 4

A-1-3 BIOS - Advanced ..................................................................................................................... A - 5

A-1-4 BIOS - Chipset ......................................................................................................................... A - 9

A-1-5 BIOS - Boot ............................................................................................................................ A - 10

A-1-6 BIOS - Security .......................................................................................................................A - 11

A-1-7 BIOS - Save & Exit..................................................................................................................A - 11

A-2 Customize Windows ......................................................................................................... A - 12

A-2-1 Enhanced Write Filter............................................................................................................. A - 12

A-2-2 File-Based Write Filter............................................................................................................ A - 13

A-2-3 Unified Write Filter.................................................................................................................. A - 15

A-2-4 Trusted Platform Module........................................................................................................ A - 17

A-3 DVI Connector Pin Details................................................................................................ A - 18

A-3-1 DVI-I Connector Pin Details ................................................................................................... A - 18

A-3-2 DVI-D Connector Pin Details.................................................................................................. A - 19

A-4 RS-232C Connector Pin Details....................................................................................... A - 21

Restore and Repair Data ........................................................................................................7 - 30

BIOS Overview......................................................................................................................... A - 2

Index

NY-series Industrial Panel PC User's Manual (W555)

Page 9

Manual Information

5 Installation

5 - 3

Y-series User's Manual (W555)

5-1 Unpack

5-1-1 Unpack Procedure

5-1

Unpack

This section provides details on how to unpack the Industrial Panel PC.

5-1-1

Unpack Procedure

1 Check the package for damage.

If there is any visible damage:

• Take photos of the package and save them.

• Inform your supplier immediately.

2 Open the package.

Ensure not to damage the contents.

3 Ensure that all items are present.

Additional Information

Refer to 5-1-2 Items Supplied with the Product

for the items supplied.

This section provides information about this manual.

Page Structure

The following page structure is used in this manual.

Manual Information

Note: This illustration is provided as a sample. It will not literally appear in this manual.

Item Explanation Item Explanation

A Level 1 heading E Special Information

B Level 2 heading F Manual name

C Level 3 heading G Page tab with the number of the main section

D Step in a procedure H Page number

NY-series Industrial Panel PC User's Manual (W555)

Page 10

Manual Information

Special Information

Special information in this manual is classified as follows:

Precautions for Safe Use

Precautions on what to do and what not to do to ensure safe usage of the product.

Precautions for Correct Use

Precautions on what to do and what not to do to ensure proper operation and performance.

Additional Information

Additional information to read as required. This information is provided to increase understanding or make operation easier

Version Information

Information on differences in specifications and functionality between different versions.

NY-series Industrial Panel PC User's Manual (W555)

Page 11

Terms and Conditions Agreement

Warranty and Limitations of Liability

Warranty

• Exclusive Warranty

Omron’s exclusive warranty is that the Products will be free from defects in materials and workman-

ship for a period of twelve months from the date of sale by Omron (or such other period expressed

in writing by Omron). Omron disclaims all other warranties, expressed or implied.

• Limitations

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF

THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based

on infringement by the Products or otherwise of any intellectual property right.

• Buyer Remedy

Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally

shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-com-

plying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal

to the purchase price of the non-complying Product; provided that in no event shall Omron be re-

sponsible for warranty, repair, indemnity or any other claims or expenses regarding the Products un-

less Omron’s analysis confirms that the Products were properly handled, stored, installed and main-

tained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any

Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall

not be liable for the suitability or unsuitability or the results from the use of Products in combination

with any electrical or electronic components, circuits, system assemblies or any other materials or

substances or environments. Any advice, recommendations or information given orally or in writing,

are not to be construed as an amendment or addition to the above warranty.

See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitations of Liability

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CON-

SEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY

WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,

WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Com-

panies exceed the individual price of the Product on which liability is asserted.

NY-series Industrial Panel PC User's Manual (W555)

Page 12

Terms and Conditions Agreement

Application Considerations

Suitability for Use

Omron Companies shall not be responsible for conformity with any standards, codes or regulations

which apply to the combination of the Product in the Buyer

er’s request, Omron will provide applicable third party certification documents identifying ratings and

limitations of use which apply to the Product. This information by itself is not sufficient for a complete

determination of the suitability of the Product in combination with the end product, machine, system, or

other application or use. Buyer shall be solely responsible for determining appropriateness of the par-

ticular Product with respect to Buyer’s application, product or system. Buyer shall take application re-

sponsibility in all cases.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR

PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO

ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND IN-

STALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

’s application or use of the Product. At Buy-

Programmable Products

• Omron Companies shall not be responsible for the user’s programming of a programmable Product,

or any consequence thereof.

•

Omron Companies shall not be responsible for the operation of the user accessible operating sys-

tem (e.g. Windows, Linux), or any consequence thereof.

Disclaimers

Performance Data

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for

the user in determining suitability and does not constitute a warranty

Omron’s test conditions, and the user must correlate it to actual application requirements. Actual per-

formance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications

. It may represent the result of

Product specifications and accessories may be changed at any time based on improvements and oth-

er reasons. It is our practice to change part numbers when published ratings or features are changed,

or when significant construction changes are made. However

be changed without any notice. When in doubt, special part numbers may be assigned to fix or estab-

lish key specifications for your application. Please consult with your Omron’s representative at any

time to confirm actual specifications of purchased Product.

, some specifications of the Product may

NY-series Industrial Panel PC User's Manual (W555)

Page 13

Terms and Conditions Agreement

Errors and Omissions

Information presented by Omron Companies has been checked and is believed to be accurate; how-

ever

, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.

NY-series Industrial Panel PC User's Manual (W555)

Page 14

Safety Precautions

Definition of Precautionary Information

The following notation is used in this manual to provide precautions required to ensure safe usage of

the Industrial Panel PC. The safety precautions that are provided are extremely important to safety.

Always read and heed the information provided in all safety precautions.

The following notation is used.

Indicates a potentially hazardous situation which, if not avoid-

WARNING

Caution

ed, could result in death or serious injury

may be severe property damage.

Indicates a potentially hazardous situation which, if not avoid-

ed, may result in minor or moderate injury

. Additionally, there

, or property damage.

Symbols

The circle and slash symbol indicates operations that you must not do. The specific operation is shown in the circle and explained in text. This example indicates prohibiting disassembly

The triangle symbol indicates precautions (including warnings). The specific operation is shown in the triangle and explained in text. This example indicates a precaution for electric shock.

The triangle symbol indicates precautions (including warnings). The specific operation is shown in the triangle and explained in text. This example indicates a general precaution.

The filled circle symbol indicates operations that you must do. The specific operation is shown in the circle and explained in text. This example shows a general precaution for something that you must do.

NY-series Industrial Panel PC User's Manual (W555)

Page 15

Warnings

Disassembly and Dropping

Do not attempt to disassemble, repair, or modify the product in any way. Doing so may result in malfunction or fire.

Installation

Always connect to a ground of 100 Ω or less when installing the product.

Safety Precautions

WARNING

Ensure that installation and post-installation checks of the product are performed by personnel in charge who possess a thorough understanding of the machinery to be installed.

Fail-safe Measures

Provide safety measures in external circuits to ensure safety in the system if an abnormality occurs due to malfunction of the product or due to other external factors af dents due to incorrect operation.

Emergency stop circuits, interlock circuit, limit circuits, and similar safety measures must be provided in external control circuits.

Unintended behavior may occur when an error occurs in internal memory of the product. As a countermeasure for such problems, external safety measures must be provided to ensure safe operation of the system.

The use of an uninterruptible power supply (UPS) allows normal operation to continue even if a momentary power failure occurs, possibly resulting in the reception of an erroneous signal from an external device affected by the momentary power failure. Take external fail-safe measures. Where necessary, monitor the power supply voltage on the system for external devices and use it as an interlock condition.

Do not use the input functions of the touchscreen in applications that involve human life, in applications that may result in serious injury stop switches.

fecting operation. Not doing so may result in serious acci-

, or for emergency

NY-series Industrial Panel PC User's Manual (W555)

Page 16

Safety Precautions

Actual Operation

Security setting adjustments should only be performed by the engineer in charge that possesses a thorough understanding of the security settings. Selecting non-recommended security settings can put your system at risk.

Changing BIOS information is only allowed for the engineer in charge that possesses a thorough understanding of the BIOS settings because it can change the behavior of the product.

Water or other liquid present on the touchscreen surface may create false touch behavior and unexpected operation. Wipe away the liquid on the touchscreen before operation.

NY-series Industrial Panel PC User's Manual (W555)

Page 17

Cautions

Industrial PC Platform Product

Non-isolated

Device

Non-isolated

Interface

24 VDC

0 VDC

Wiring

The product has an internal non-isolated DC power supply. Circuit ground (0 VDC) and frame ground are connected together. When connecting a nonisolated device or a non-isolated interface to the product, take appropriate actions to avoid communication failures or damage to the mentioned ports.

Safety Precautions

Caution

Never ground the 24 VDC side of the power supply. This may cause a short circuit.

NY-series Industrial Panel PC User's Manual (W555)

Page 18

Precautions for Safe Use

Disassembly, Dropping, Mounting, Installation and Storage

• Do not drop the product or subject it to abnormal vibration or shock. Doing so may result in product

malfunction or burning.

• When unpacking, check carefully for any external scratches or other damages. Also, shake the

product gently and check for any abnormal sound.

• Always use the devices specified in the relevant manual.

• The product must be installed in a control panel.

• Always install equipment that is included in the product specifications. Not doing so may result in

failure or malfunction.

• If the storage period exceeds 6 months, check the performance of the Fan Unit before production

starts.

• Install the product in the correct orientation and temperature according to the specifications in the

manual to prevent overheating. Not doing so may result in malfunction.

• When connecting peripheral devices to the product, ensure sufficient countermeasures against

noise and static electricity during installation of the peripheral devices.

• The mounting panel must be between 1.6 and 6.0 mm thick. Tighten the Mounting Brackets evenly

to a torque of 0.6 Nm to maintain water and dust resistance. If the tightening torque exceeds the

specified value, or the tightening is not even, deformation of the front panel may occur. Additionally,

make sure the panel is not dirty or warped and that it is strong enough to hold the product.

• Do not let metal particles enter the product when preparing the panel. Do not allow wire clippings,

shavings, or other foreign material to enter any product. Otherwise, the product burning, failure, or

malfunction may occur. Cover the product or take other suitable countermeasures, especially during

wiring work.

Wiring

• Follow the instructions in the manual to correctly perform connector wiring and insertion. Double-

• Always ensure connectors, cables, PCIe Cards and Storage devices are completely locked in place

• Before you connect a computer to the product, disconnect the power supply plug of the computer

• Do not bend or pull the cables beyond normal limit. Do not place heavy objects on top of the cables

• Always use power supply wires with sufficient wire diameters to prevent voltage drop and burning.

• Be sure that all mounting bracket screws and cable connector screws are tightened to the torque

• Use crimp terminals for wiring.

check all wiring and connector insertion before turning ON the power supply.

to prevent accidental disconnection.

from the AC outlet. Also, if the computer has an FG terminal, make the connections so that the FG

terminal has the same electrical potential as the product. A difference in electrical potential between

the computer and the product may cause failure or malfunction.

or other wiring lines. Doing so may break the cables.

Make sure that the current capacity of the wire is sufficient. Otherwise, excessive heat may be gen-

erated. When cross-wiring terminals, the total current for all the terminals will flow in the wire. When

wiring cross-overs, make sure that the current capacity of each of the wires is not exceeded.

specified in the relevant manuals. The loose screws may result in fire or malfunction.

NY-series Industrial Panel PC User's Manual (W555)

Page 19

Precautions for Safe Use

• Observe the following precautions to prevent broken wires.

•

When you remove the sheath, be careful not to damage the conductor.

• Connect the conductor without twisting the wires.

• Do not weld the conductors. Doing so may cause the wires to break with vibration.

Power Supply Design and Turning ON/OFF the Power Supply

• Always use a power supply that provides power within the rated range.

Do not perform a dielectric strength test.

•

• Always use the recommended uninterruptible power supply (UPS) to prevent data loss and other

system file integrity issues caused by unexpected power interruption. Back up the system files in the

planned way to prevent data loss and other system file integrity issues caused by incorrect opera-

tion.

• Use an Omron S8BA UPS with the correct revision number to prevent improper system shutdown.

• Power ON after the DVI cable is connected between the product and an external monitor.

• Always check the power supply and power connections before applying power. Incorrect power con-

nections can damage the product or cause burning.

• Always turn OFF the power supply to system before you attempt any of the following.

• Inserting or removing PCIe Cards

• Connecting cables

• Connecting or disconnecting the connectors

• Wiring the system

• Replacing or removing the HDD/SSD

• Replacing the Battery

• Replacing the Fan Unit

Actual Operation

• Choose an operating system password that is not obvious to prevent unauthorized access.

Remember the OS user name and password. The product is inaccessible without it.

•

• Before operating the system , please make sure the appropriate software is installed and config-

ured. Doing so may prevent unexpected operation.

• Install all updates and ensure the browser stays up-to-date.

• Install all updates and ensure the firewall stays up-to-date.

• Make sure that your OS environment is protected against malicious software and viruses.

• Install all updates and ensure virus definitions stay up-to-date.

• Do not remove the fan cover while the power is ON. Contact with a rotating fan may result in injury.

• Virtual memory settings can affect the performance of the system. Disable the paging file after in-

stallation of applications or updates.

• Correctly perform wiring and setting, and ensure that the shutdown by the UPS can be executed.

• Always use the SMART monitoring feature for storage devices that do not comply to the Omron

Storage Device Specifications. Monitor the operating temperature and vibrations to ensure they stay

within the environmental specifications of the storage device.

NY-series Industrial Panel PC User's Manual (W555)

Page 20

Precautions for Safe Use

Operation

• Do not carry out the following operations when accessing a USB device or an SD Memory Card.

Turn OFF the power supply of the product.

•

• Press the Power Button of the product.

• Remove a USB device or SD memory card.

• Do not attempt to remove or touch the fan unit while the product is powered ON or immediately after

the power supply is turned OFF. If you attempt to replace the fan unit then, there is a risk of personal

injury due to hot or rotating parts.

• Press the power button for several seconds to force the product shutdown. Always back up files in

the planned way to prevent data loss or system file corruption.

• Do not touch any product housing when power is being supplied or immediately after the power sup-

ply is turned OFF. Doing so may result in burn injury.

• Confirm the safety of the system before using the touch panel.

• Signals from the touchscreen may not be entered if the touchscreen is pressed consecutively at

high speed. Only move on to the next operation after confirming that the product has detected the

previous input of the touchscreen.

• Do not accidentally press the touchscreen when the backlight is not lit or when the display does not

appear. Confirm the safety of the system before pressing the touchscreen.

• Do not use hard or pointed objects to operate or scrub the touchscreen, otherwise the surface of the

touchscreen may be damaged.

General Communications

• Separate the machine network segment from the office network to avoid communication failures.

Battery Replacement

• Dispose of any Battery that has been dropped on the floor or otherwise subjected to excessive

shock. Batteries that have been subjected to shock may leak if they are used.

UL standards require that only an experienced engineer replace the Battery. Make sure that an ex-

•

perienced engineer is in charge of Battery replacement.

• The Battery may leak, rupture, heat, or ignite. Never short-circuit, charge, disassemble, heat, or in-

cinerate the Battery or subject it to strong shock.

Cleaning, Maintenance and Disposal

• Do not use corrosive substances to clean the product. Doing so may result in the failure or malfunc-

tion.

Periodically check the installation conditions in applications where the product is subject to contact

•

with oil or water.

• As the rubber gasket will deteriorate, shrink, or harden depending on the operating environment, pe-

riodical inspection is necessary.

• Dispose of the product and batteries according to local ordinances as they apply.

NY-series Industrial Panel PC User's Manual (W555)

Page 21

Precautions for Safe Use

• The following information must be displayed for all products that contain primary lithium batteries

with a perchlorate content of 6 ppb or higher when shipped to or transported through the State of

California, USA.

Perchlorate Material - special handling may apply

See http://www.dtsc.ca.gov/hazardouswaste/perchlorate.

• The product contains a lithium battery with a perchlorate content of 6ppb or higher. When exporting

an end product containing the product to or shipping through California, USA, label all packing and

shipping containers appropriately.

NY-series Industrial Panel PC User's Manual (W555)

Page 22

Precautions for Correct Use

Storage, Installation and Mounting

• Do not operate or store the product in the following locations. Operation may stop or malfunctions

may occur.

• Locations subject to direct sunlight

• Locations subject to temperatures or humidity outside the range specified in the specifications

• Locations subject to condensation as the result of severe changes in temperature

• Locations subject to corrosive or flammable gases

• Locations subject to dust (especially iron dust) or salts

• Locations subject to exposure to water, oil or chemicals

• Locations subject to shock or vibration

• Locations outdoors subject to direct wind and rain

• Locations subject to strong ultraviolet light

• Always install the product with sufficient surrounding space to allow for adequate heat dissipation

and cooling effect.

• Take appropriate and sufficient countermeasures when installing the product in the following loca-

tions

• Locations subject to strong, high-frequency noise

• Locations subject to static electricity or other forms of noise

• Locations subject to strong electromagnetic fields

• Locations subject to possible exposure to radioactivity

• Locations close to power lines

• Always touch a grounded piece of metal to discharge static electricity from your body before starting

an installation or maintenance procedure.

• Insert USB devices and PCIe devices correctly to avoid the burning, failure or malfunction.

• Execute a backup of the product before PCIe addition or replacement. Be sure that the PCIe device

works correctly before you use them for actual operation. PCIe devices and their related software

may cause an OS boot failure or crash.

• The backlight has a finite life and if that is exceeded, the product may fail or malfunction. Check the

brightness periodically and if necessary, replace the product.

• Ensure the selected operating system supports ACPI to enable operating system shutdown using

the power button.

• Download the enhanced Video Driver from the OMRON Download Center and install it on the Indus-

trial PC.

Wiring

• Always ensure the rated supply voltage is connected to the product.

• Do not allow wire clippings, shavings, or other foreign material to enter the product. Otherwise, burn-

ing, failure, or malfunction may occur. Cover the product or take other suitable countermeasures, es-

pecially during wiring work.

• Do not use cables exceeding the maximum specified length. Doing so may cause malfunction.

• Do not connect an AC power supply to the DC power connector.

NY-series Industrial Panel PC User's Manual (W555)

Page 23

Actual Operation and Operation

• After an OS update or a peripheral device driver update for the product is executed, the product be-

havior might be dif

• Always create a Windows System Repair Disk using Windows Backup and Restore to recover the

HDD/SSD configuration if necessary.

• Ensure the fan is operational to provide adequate cooling while the power is turned ON.

• HDD and SSD storage devices, SD Memory Cards, power buttons, fan units and batteries have fi-

nite lives and if those are exceeded, the product may fail or malfunction.

• Always monitor the fan status. If a fan is used beyond its service life, the Low Revolution Speed

warning message is displayed and the product overheating may occur.

• Always monitor the battery warning message. When a battery has low voltage, the system time will

be lost.

• The touchscreen supports 5 simultaneous touches. When the number of touches is exceeded, not

all touch points will be detected.

• The capacitive touchscreen reacts to contact on its surface. Accidental touching the surface of the

touchscreen may cause unintended behavior.

• You can operate the touchscreen even when you wear some gloves. Confirm that you can correctly

operate the touchscreen while wearing gloves prior to actual operation.

• Do not turn ON the power supply to the product when a part of a human body or a conductive object

is touching the surface of the touchscreen. Doing so will cause the touchscreen functionality to be

disabled. Remove the conductive object and cycle the power supply to restore the touchscreen

functionality.

• If the product experiences a sudden loss of power or disconnecting the cable while saving a setting

or transfer of data is underway, the changes may not be stored and unexpected behavior may occur.

• Ensure that available software checks are performed by personnel in charge who possess a thor-

ough understanding of the software.

• Diagnostic information is not available when the Industrial PC Support Utility is not installed.

ferent. Confirm that operation is correct before you start actual operation.

Precautions for Correct Use

Battery Replacement

• Turn ON the power after replacing the battery for a product that has been unused for an extended

period of time. Leaving the product unused without turning ON the power even once after the battery

is replaced may result in a shorter battery life.

Make sure to use a battery of the correct type, install the battery properly.

•

• Apply power for at least five minutes before changing the battery. Mount a new battery within five

minutes after turning OFF the power supply. If power is not supplied for at least five minutes, the

clock data may be lost. Check the clock data after changing the battery.

SD Memory Cards

• Insert an SD Memory Card completely and ensure it is in place.

Cleaning and Maintenance

• Do not use corrosive substances to clean the product.

Turn OFF the product or disable the touchscreen for cleaning with water.

•

NY-series Industrial Panel PC User's Manual (W555)

Page 24

Regulations and Standards

Conformance to EU Directives

The Industrial Panel PC complies with EU Directives. To ensure that the machine or device in which

the Industrial Panel PC is used complies with EU Directives, the following precautions must be ob-

served:

• The Industrial Panel PC must be installed within a control panel.

• The Industrial Panel PC that complies with EU Directives also conforms to the Common Emission

Standard. Radiated emission characteristics (10-m regulations) may vary depending on the configu-

ration of the control panel used, other devices connected to the control panel, wiring, and other con-

ditions. You must therefore confirm that the overall machine or equipment in which the Industrial

Panel PC is used complies with EU Directives.

• This is a Class A product (for industrial environments). In a residential environment, it may cause

radio interference. If radio interference occurs, the user may be required to take appropriate meas-

ures.

Applicable Directive

EMC Directive

OMRON devices that comply with EU Directives also conform to the related EMC standards so that

they can be more easily built into other devices or the overall machine. The actual products have been

checked for conformity to EMC standards.

Applicable EMC (Electromagnetic Compatibility) standards are as follows:

• EMS (Electromagnetic Susceptibility): EN 61131-2

• EMI (Electromagnetic Interference): EN 61131-2 (Radiated emission: 10-m regulations)

Whether the products conform to the standards in the system used by the customer, however, must be

checked by the customer. EMC-related performance of the OMRON devices that comply with EU Di-

rectives will vary depending on the configuration, wiring, and other conditions of the equipment or con-

trol panel on which the OMRON devices are installed. The customer must, therefore, perform the final

check to confirm that devices and the overall machine conform to EMC standards.

NY-series Industrial Panel PC User's Manual (W555)

Page 25

Conformance to KC Standards

Observe the following precaution if you use Industrial PC Platform products in Korea.

Class A Device (Broadcasting Communications Device for Office Use).

This device obtained EMC registration for of

other than homes.

Sellers and/or users need to take note of this.

fice use (Class A), and it is intended to be used in places

Conformance to UL and CSA Standards

Some Industrial PC Platform products comply with UL and CSA standards. If you use a product that

complies with UL or CSA standards and must apply those standards to your machinery or devices,

refer to this manual. This manual provides the application conditions for complying with the standards.

If the product is used in a manner not specified in the Instruction Sheet or in the product manuals then

the protection provided by the equipment may be impaired.

Regulations and Standards

Software Licenses and Copyrights

This product incorporates certain third party software. The license and copyright information associat-

ed with this software is available at http://www

.fa.omron.co.jp/nj_info_e/.

NY-series Industrial Panel PC User's Manual (W555)

Page 26

Related Manuals

The following manuals are related. Use these manuals for reference.

Related Products Manuals

Manual

name

UPS S8BA User's Manual

UPS Setting Utility Instruction Manual

UPS Power Attendant Lite for Windows User's Manual

Cat.

No.

U702 S8BA Learning the information

---

--- S8BA Learning the information

Model num-

bers

• SB8A

• BU-2R

Application Description

that is necessary to use the Uninterruptible Power Supply (UPS) Unit.

Learning the information that is necessary to connect the UPS and to configure all settings.

that is necessary to use the software to monitor test and control the UPS and to configure all settings.

An introduction to the UPS is provided along with the following information:

• Overview

• Preparation

• Installation and Connection

• Check and Start Operation

• Maintenance and Inspection

• Shutdown Processing

• I/O Signal Functions

• T

roubleshooting

An introduction to the UPS Setting Utility is provided along with the following information:

• Overview

• Operating Environment

• Software License Agreement

• Connect

• Use the UPS Setting Utility

• Setting Details

An introduction to the software is provided along with the following information:

• Overviews

• Connection and Installation

• The Simple Usage and Operation Test

• Settings

NY-series Industrial Panel PC User's Manual (W555)

Page 27

Industrial Monitor Manual

This table contains the related manual of the Industrial Monitor.

Related Manuals

Manual

name

Industrial Monitor

’s

User Manual

Cat.

No.

W554

Model num-

bers

• NYM15W

C100£

• NYM12W-

C100£

Application Description

Learning all basic information

about the Industrial Monitor includes introductory information with features, hardware overview, specifications, mounting, wiring, connecting, operating and maintaining the Industrial Monitor.

. This

An introduction to the Industrial Monitor is provided along with the following information:

• Overview

• Hardware

• Software

• Specifications

• Installation

• Operating Procedures

• Maintenance

NY-series Industrial Panel PC User's Manual (W555)

Page 28

Terminology and Abbreviations

Industrial PC Platform

Term / Abbreviation Description

Industrial PC Platform An integrated range of OMRON products designed for use in any industrial applica-

tion that will benefit from advanced PC technology

Industrial Monitor An industrial monitor with a touchscreen as the user interface designed to work in

industrial environments

Industrial Panel PC An industrial PC with an integrated touchscreen monitor designed to work in indus-

trial environments

Industrial Box PC A box-shaped industrial PC including an OS designed to work in industrial environ-

ments

IPC Industrial PC

Sysmac OMRON’s brand name of the product family for the industrial automation equip-

ment

Hardware

Term / Abbreviation Description

BMC Board Management Controller

CPU A Central Processing Unit is the hardware within a computer that executes the in-

DVI Digital Visual Interface

DVI-D A Digital Visual Interface with only Digital signals

DVI-I A Digital Visual Interface with Analog and Digital signals

Ethernet A network communication protocol used in TCP/IP network

HDD A Hard Disk Drive storage device

HMI A Human Machine Interface that facilitates machine operation and control

iMLC Industrial Multi-Level Cell type of SSD storage device

PCIe The PCI Express is a high-speed computer bus standard called Peripheral Compo-

SATA The Serial AT Attachment is a serial bus interface primarily used with mass storage

SLC Single-Level Cell type of SSD storage device

SO-DIMM Small Outline Dual Inline Memory Module

SSD A Solid State Drive storage device

USB Universal Serial Bus

structions of a computer program

nent Interconnect Express

devices such as hard disk drives

NY-series Industrial Panel PC User's Manual (W555)

Page 29

Software

Term / Abbreviation Description

ACPI Advanced Configuration and Power Interface protocol for operating systems

API Application Programming Interface

BIOS Basic Input Output System. The first software run by a PC when powered on.

Developer Any person involved with the development of software

DST Daylight Saving Time

EWF Enhanced Write Filter

FBWF File-Based Write Filter

IIoT Industrial Internet of Things

Linux An open source Operating System

MBR Master Boot Record

Merge module A module providing a standard method by which developers deliver shared Win-

MSDN Microsoft Developer Network

NUI Natural User Interface

OS Operating System

PLC Programmable Logic Controller

RTOS Realtime Operating System

SDK Software Development Kit

TCP/IP Transmission Control Protocol / Internet Protocol, a core member of the Internet

TPM Trusted Platform Module

VxWorks A Realtime Operating System designed by Wind River

Windows An Operating System designed by Microsoft

Terminology and Abbreviations

dows installer components and setup logic to their applications

protocol suite

NY-series Industrial Panel PC User's Manual (W555)

Page 30

W555-E2-03

Cat. No.

Revision code

Revision History

A manual revision code appears as a suffix to the catalog number on the front and back covers of the

manual.

Revision code Date Revised content

03 May 2017

02 December 2016

01 August 2016 First release

• Added operating system Windows 10 IoT Enterprise L

• Added Storage Device Considerations

• Modified UPS configuration procedure

• Several minor modifications

• UL implementation

• KC Standard implementation

• Minor modifications

TSB

NY-series Industrial Panel PC User's Manual (W555)

Page 31

Sections in this Manual

Operating Procedures

Specifications

Installation

Software

Hardware

Overview

Appendices

Maintenance

Sections in this Manual

NY-series Industrial Panel PC User's Manual (W555)

Page 32

Sections in this Manual

NY-series Industrial Panel PC User's Manual (W555)

Page 33

Overview

This section provides general information about the Industrial Panel PC.

1-1 Intended Use

1-2 Hardware Features....................................................................................... 1 - 3

1-3 ID Information Label..................................................................................... 1 - 4

1-4 Product Configuration ................................................................................. 1 - 5

1-5 Industrial PC Platform Overview ................................................................ 1 - 6

1-5-1 Industrial Monitor ......................................................................................... 1 - 6

1-5-2 Industrial Box PC ......................................................................................... 1 - 7

1-5-3 Industrial Panel PC ...................................................................................... 1 - 7

................................................................................................ 1 - 2

NY-series Industrial Panel PC User's Manual (W555)

1 - 1

Page 34

1 Overview

1-1

Intended Use

The Industrial Panel PC is intended to be used as a panel mounted industrial PC in factory automation

environments. This Panel PC can be configured with Windows, Linux or a realtime operating system

(RTOS). It can be used with third party software to serve as a powerful PC platform.

A user can access the Panel PC for control, configuration and supervisory operations using the inte-

grated touchscreen display.

The Panel PC can easily be integrated in manufacturing innovations like big data, NUI and IIoT.

The Panel PC has a compact design that offers flexibility, expandability and easy maintenance for ap-

plications in factory automation environments.

1 - 2

NY-series Industrial Panel PC User's Manual (W555)

Page 35

1 Overview

1-2 Hardware Features

1-2

Hardware Features

The Industrial Panel PC provides the following hardware features.

• Flexible mounting orientation

The Panel PC is designed to support landscape and portrait mounting orientations.

• Powerful CPU options

Powerful CPU options provide high performance for various applications.

• Fanless cooling for multiple CPU types

The Panel PC has passive cooling for multiple CPU types which means no moving parts and less

maintenance effort.

• Easy access to storage devices and the PCI Express Card

Adding or changing storage devices (HDD, SSD) and the PCI Express Card is fast and simple.

• LED indicators

LED indicators provide a clear indication of the operational status of the Panel PC.

• DVI visual interface

The video interface for the Panel PC is provided with a DVI connector for connection to an additional

monitor.

An extra (optional) DVI interface is available for connection to a second additional monitor.

• 3 Ethernet ports 1Gb/s

Interface with multiple networks.

• Built-in I/O

Built-in I/O for UPS status and Panel PC shutdown control are provided.

• 4 USB ports

2 USB2.0 ports and 2 USB3.0 ports are provided for connection to external USB devices such as

keyboards, memory sticks, or other peripheral hardware.

• Built-in SD Memory Card slot

An SD Memory Card slot is provided for removable memory.

• LCD touchscreen

The LCD touchscreen provides high functionality for your PC interface.

The high resolution and a high brightness provide clarity and high visibility.

• Multi-touch functionality

Up to 5 simultaneous touches are supported for complex functions.

• Backlit Logo

The standard product logo is OMRON. Check your sales representative for the possibilities to cus-

tomize the product logo. The product logo is provided with a controllable backlight to increase visibil-

ity.

• Brightness control

Use the Monitor Utilities to control the Panel PC's LCD brightness.

NY-series Industrial Panel PC User's Manual (W555)

1 - 3

Page 36

CUSTOM ID

Corporation Kyoto, 600-8530 JAPAN MADE IN THE NETHERLANDS

PRODUCT NAME

G EF

1 Overview

1-3

ID Information Label

The ID information label contains relevant information about the Industrial Panel PC.

The following example will be different from your product label.

Item Name Description

A Product name The name of your product

C Power rating Power rating details

D Custom ID

E Standards and QR

F LOT number and

*1. Refer to 1-4 Product Configuration on page *2. Refer to 4-2-4 Ethernet Connector Specifications on page 4 - 18 for Ethernet specifications.

Model

(Optional)

code

serial number

MAC ADDRESS

Model and configuration details

A custom ID [NYC£££-££££££££]

Only for Industrial Monitor

The applicable standards and a QR code for OMRON internal use

Production details, consisting of:

• The lot number of the Industrial Panel PC

DDMYY with Month number 1 to 9 for January to September, X for October, Y for November, and Z for December. £: For use by OMRON

s and Industrial Panel PCs with a custom logo *1.

in the format DDMYY£.

• Serial number (4 digits)

T 1: the MAC address of Ethernet port 1

• POR

• PORT 2: the MAC address of Ethernet port 2

• PORT 3: the MAC address of Ethernet port 3

1 - 5 for model details.

Additional Information

Refer to 2-1-1 Front and T

1 - 4

op of the Industrial Panel PC on page 2 - 2 for the ID label location.

NY-series Industrial Panel PC User's Manual (W555)

Page 37

N Y P

2 3 4 5 6 7 8 9

10 11 12 13 14

1 Overview

1-4 Product Configuration

1-4

Product Configuration

This section provides an overview of the product configurations available for the Industrial Panel PC.

The product configuration is visible in the model-type that is mentioned on the ID information label of

the Panel PC.

The structure of the model-type is: NYP££-£££££-££££££££.

Each item in the model-type has a specific meaning.

Item Description Option / Description

1 Series name NYP: NY- series Industrial Panel PC

2 Processor

3 Main memory

4 Expansion slots 1: 1 PCIe slot

5 Operating system 1: Windows Embedded Standard 7 - 32 bit

6 Storage

7 Optional interface 1: RS-232C

8 Display size

(diagonal)

9 Display ratio W: Wide

10 Touchscreen C: Projected Capacitive Touch type

11 Frame type 1: Aluminum frame, black

12 Design 0: Standard

13 Built-in options 0: None

14 Logo 0: OMRON

*1. Not available for Windows 10 IoT Enterprise LTSB.

17: Intel® Core™ i7-4700EQ 4th generation CPU with Fan Unit for active cooling

25: Intel® 4th generation CPU with fanless cooling

1C: Intel® Celeron® 2980U 4th generation CPU with fanless cooling

1: 2 GB, non-ECC 2: 4 GB, non-ECC 3: 8 GB, non-ECC

2: Windows Embedded Standard 7 - 64 bit 3: Windows 10 IoT Enterprise L

8: 32 GB, SSD SLC 9: 64 GB, SSD SLC C: 320 GB, HDD K: 128 GB, SSD iMLC

2: DVI-D

12: 12.1 inch model, 1280 x 800 pixels, 24 bit full color 15: 15.4 inch model, 1280 x 800 pixels, 24 bit full color

2: Customization

Core™ i5-4300U

TSB - 64 bit

NY-series Industrial Panel PC User's Manual (W555)

1 - 5

Page 38

1 Overview

1-5

1-5-1

Industrial PC Platform Overview

The Industrial PC Platform is an integrated range of products designed for use in a variety of industrial

applications that will benefit from advanced PC technology. The range is scalable, robust and reliable,

and is suitable for use with both standard operating system software and proprietary programs for ma-

chine control and automation.

In line with OMRON’s established quality standards, each element in the Industrial PC Platform, rang-

ing from the standalone Industrial Box PC to the touchscreen Industrial Monitor, is engineered with

long-life components and built to the most advanced design standards.

The following sections introduce Industrial PC Platform products.

Industrial Monitor

The Industrial Monitor is of key importance at the interface between operator and system. The Indus-

trial Monitor is efficient, effective and highly visible with an attractive design.

Using smart algorithms, the touch controller determines the exact location of each touch for precise

control as well as detecting abnormal or illegal actions to protect misuse or false touches.

1 - 6

NY-series Industrial Panel PC User's Manual (W555)

Page 39

1 Overview

1-5 Industrial PC Platform Over-

1-5-2

Industrial Box PC

The Industrial Box PC is designed to meet the specific needs of the industrial environment. Design

simplification and future-proof architecture minimize the risk of failure. In addition, new PC features

can be seamlessly incorporated, without the need for wholesale redesign.

view

1-5-2 Industrial Box PC

1-5-3

Industrial Panel PC

The Industrial Panel PC intelligently combines the functionality of the Industrial Box PC and Industrial

Monitor

and reliable operation in industrial environments.

. No cables are used between the two components, which ensures optimal signal distribution

NY-series Industrial Panel PC User's Manual (W555)

1 - 7

Page 40

1 Overview

1 - 8

NY-series Industrial Panel PC User's Manual (W555)

Page 41

Hardware

This section provides an overview of the hardware of the Industrial Panel PC.

2-1

2-2 LED Indicators.............................................................................................. 2 - 5

2-3 Power Button................................................................................................ 2 - 9

2-4 Drive Bays................................................................................................... 2 - 10

2-5 SD Memory Card Slot ................................................................................ 2 - 11

2-6 PCIe Card Slot ............................................................................................2 - 12

2-7 Connectors .................................................................................................2 - 13

2-8 Spare Parts .................................................................................................2 - 17

2-9 Optional Hardware .....................................................................................2 - 19

Component Names and Functions............................................................. 2 - 2

2-1-1 Front and Top of the Industrial Panel PC...................................................... 2 - 2

2-1-2 Back and Bottom of the Industrial Panel PC................................................. 2 - 3

2-2-1 Bottom LED Indicators.................................................................................. 2 - 5

2-2-2 Front LED and LED Indicator........................................................................ 2 - 7

2-7-1 Power Connector ........................................................................................ 2 - 13

2-7-2 I/O Connector ............................................................................................. 2 - 13

2-7-3 USB Connectors ......................................................................................... 2 - 14

2-7-4 Ethernet Connectors................................................................................... 2 - 15

2-7-5 DVI Connector ............................................................................................ 2 - 15

2-7-6 RS-232C Connector (Optional)................................................................... 2 - 16

2-7-7 DVI-D Connector (Optional)........................................................................ 2 - 16

2-8-1 Battery ........................................................................................................ 2 - 17

2-8-2 Fan Unit ...................................................................................................... 2 - 17

2-8-3 Accessory Kit .............................................................................................. 2 - 18

2-9-1 SD Memory Cards ...................................................................................... 2 - 19

2-9-2 USB Flash Drives ....................................................................................... 2 - 19

2-9-3 Storage Devices ......................................................................................... 2 - 20

2-9-4 DVI Cables.................................................................................................. 2 - 21

2-9-5 USB Type-A to USB Type-B Cables ........................................................... 2 - 21

2-9-6 Industrial Monitor ....................................................................................... 2 - 22

2-9-7 Power Supply.............................................................................................. 2 - 22

2-9-8 UPS ............................................................................................................ 2 - 23

2-9-9 UPS Communication Cable ........................................................................ 2 - 23

NY-series Industrial Panel PC User's Manual (W555)

2 - 1

Page 42

2 Hardware

2-1

2-1-1

Component Names and Functions

This section shows views of the Industrial Panel PC with information about all items.

Front and Top of the Industrial Panel PC

This section shows the component names and functions for the front and top of the Panel PC.

Item Name Description

A Logo LED Backlit logo with adjustable brightness

B Status LED indicator LED to indicate power and connection status with adjustable brightness

C ID information label Label containing Model ID., LOT No. and other product specific information.

Refer to 1-3 ID Information Label on page 1 - 4 for label details.

D Touch screen LCD Multi-touch LCD display

2 - 2

NY-series Industrial Panel PC User's Manual (W555)

Page 43

2 Hardware

2-1 Component Names and Functions

2-1-2

Back and Bottom of the Industrial Panel PC

This section shows the component names and functions for the back and bottom of the Panel PC.

2-1-2 Back and Bottom of the Industrial Panel PC

Item Name Description

A Cover Provides access to:

• The battery

• The fans (only for Panel PCs that have active cooling)

• The battery replacement date

NY-series Industrial Panel PC User's Manual (W555)

B Ground terminal Provides a ground terminal for the Panel PC

C Option port Interface connection options:

D Mounting brackets 8 retractable mounting brackets to secure the Panel PC on a mount-

E SD Memory Card slot SD Memory Card slot

F PCIe bay PCI Express mounting slot

• The license key for the operating system (optional)

• RS-232C connector

• DVI-D connector for additional monitor connection

ing surface

2 - 3

Page 44

2 Hardware

G DVI connector Digital Visual Interface connector

H 10BASE-T / 100BASE-TX /

I USB 2.0 connectors 2 USB 2.0 interface connectors

J USB 3.0 connectors 2 USB 3.0 interface connectors

L I/O connector 2 inputs (Power ON/OFF Input and UPS Mode Input) and 1 output

M LED indicators Visual indicators for the operating state of the Industrial Panel PC

N Power button Pushbutton to manually power ON/OFF the Panel PC

O Power connector Lockable power connector

*1. Depending on the model one or two drives are supported.

*2. Installed storage and the operating system are depending on the configuration.

Item Name Description

3 RJ45 Gb Ethernet interface connectors 1000BASE-T Ethernet connectors

Drive bays

Two 2.5 inch drive bays for HDD/SSD storage devices:

• Drive bay A = Bay for an optional drive

and main storage Drive bay A is the bay at the side of the connectors

• Drive bay B = Bay for an optional drive

Drive bay B is the bay at the side of the display

(Power Status Output)

Refer to 4-1-4 CPU Specifications on page

Refer to 1-4 Product Configuration on page 1 - 5 for:

4 - 6 for the number of supported drives.

• installed drive (storage) details

• operating system details

for the operating system

for additional storage

2 - 4

NY-series Industrial Panel PC User's Manual (W555)

Page 45

2 Hardware

2-2

2-2-1

LED Indicators

The Industrial Panel PC has two rows of four LED indicators on the bottom of the Panel PC and two

LED indicators on the front of the Panel PC. These LED indicators provide the current operating status

of the Industrial Panel PC.

Bottom LED Indicators

The Industrial Panel PC has two rows of four LED indicators on the bottom that show the operating

status of the Industrial Panel PC. Both rows have the same function.

The following LED indicators are available:

2-2 LED Indicators

2-2-1 Bottom LED Indicators

Item

A PWR Power Indicates the operating mode of the Industrial Panel PC.

B ERR Error Indicates the presence and type of an error.

C HDD Hard Disk

D RUN Run Indicates the status of a user-defined function.

LED

Indicator

Name Description

Indicates HDD/SSD activity.

Drive

PWR LED Indicator

The Power LED (PWR) indicates the operating mode of the Panel PC.

Color Status Meaning

Green Not lit There is no power supplied or the Panel PC is OFF.

Blinking Power is currently supplied and the Panel PC is in

stand-by mode.

Lit Power is currently supplied and the Panel PC is turned

ON.

NY-series Industrial Panel PC User's Manual (W555)

2 - 5

Page 46

2 Hardware

ERR LED Indicator

The Error LED (ERR) indicates the presence and type of an error within the Industrial Panel PC.

Red Not lit

Color Status Meaning

• The 24 VDC power is not supplied

• No error is present

Blinking

Lit

Fan Error

•

Battery low

•

Thermal shutdown

•

atchdog Error

•

Power Supply undervoltage error

•

Power Supply overvoltage error

•

• Power supply defective

Additional Information

• The status of this LED can also be defined by users using the Industrial PC System API. Refer to 3-3-2 Industrial PC System API on page

3 - 25 for Industrial PC System API details.

• Refer to 7-2 Corrective Maintenance on page 7 - 13 for actions to solve errors.

HDD LED Indicator

The Hard Disk Drive LED (HDD) indicates activity of the HDD or SSD.

Color Status Meaning

Yellow Flickering The HDD or SSD is active.

RUN LED Indicator

The RUN LED is available for user applications.

Color Status Meaning

Green Not lit User-defined.

The status can be defined in a user program using the

Blinking

Lit

Additional Information

Refer to 3-3-2 Industrial PC System API on page 3 - 25

Industrial PC System API.

for Industrial PC System API details.

2 - 6

NY-series Industrial Panel PC User's Manual (W555)

Page 47

2 Hardware

2-2-2

Front LED and LED Indicator

The front of the Industrial Panel PC has a logo LED and a Status LED indicator.

The Status LED indicator provides the same information as the Power and Error LEDs on the bottom

of the Industrial Panel PC

The following LEDs are available on the front of the Industrial Panel PC.

2-2 LED Indicators

2-2-2 Front LED and LED Indicator

Item LED Description

A Logo LED LED to backlight the logo

B Status Indicator

LED

Indicates the operating condition of the Industrial Panel PC

NY-series Industrial Panel PC User's Manual (W555)

2 - 7

Page 48

2 Hardware

Logo LED

The Logo LED brightness can be changed with the Industrial Monitor Utility.

Status LED Indicator

The Status LED indicator provides information about the operating condition of the Industrial Panel

PC.

Additional Information

The Logo LED brightness is adjustable. Refer to Industrial Monitor Utility

for brightness details.

The Industrial Monitor Utility information is available:

• For products NYM£ in the section Software in this manual.

• For products NYP£ in the section Support Software in this manual.

• For products NY5£ in the NY-series IPC Machine Controller Industrial Panel PC / Industrial

Box PC Setup User’s Manual (Cat. No. W568)

Color Status Meaning

None Not lit One of the following situations:

• The 24 VDC power is not supplied.

• Normal operation

urned OFF by the Industrial Monitor Utility.

• T

Green

Red Blinking One of the following situations:

Red Lit At maximum brightness in following situations:

Blinking Power is currently supplied and the Industrial Panel PC is in stand-by

mode.

Fan Error

•

Battery low

•

Power supply undervoltage error

•

Power supply overvoltage error

•

• Power supply defective

• Monitor internal hardware error

At controllable brightness in following situations:

Thermal shutdown

•

atchdog Error

•

Additional Information

• Refer to Industrial Monitor Utility information for brightness adjustment details.

• For Panel PCs without Machine Controller Software the status of this LED can also be defined by the Industrial Monitor API.

• The Industrial Monitor Utility information and the Monitor API information are available:

• For products NYP£ in the section Support Software.

• For products NY5£ in the NY-series IPC Machine Controller Industrial Panel PC / Industrial

Box PC Setup User’s Manual (Cat. No. W568)

• NY-series Software Development Kit User's Manual

2 - 8

NY-series Industrial Panel PC User's Manual (W555)

Page 49

2 Hardware

2-3

Power Button

The power button is used to manually switch the Panel PC ON and OFF.

Additional Information

2-3 Power Button

• Refer to 6-2 Power ON on page

• Refer to 6-3 Power OFF on page 6 - 5 for OFF details.

6 - 3 for ON details.

NY-series Industrial Panel PC User's Manual (W555)

2 - 9

Page 50

2 Hardware

2-4

Drive Bays

The drive bays in the Industrial Panel PC accept 2.5 inch Hard Disk Drives (HDD) or Solid State

Drives (SSD). Depending on the model one or two drives are supported.

Additional Information

• Refer to 4-1-4 CPU Specifications on page 4 - 6 for the number of supported drives.

• Refer to 4-1-6 Storage Device Specifications on page 4 - 8 for storage device specifications.

• Refer to 5-2-1 Install a Drive on page 5 - 5 for install information.

• Refer to 7-2-5 Replace a Drive on page 7 - 20 for maintenance information.

2 - 10

NY-series Industrial Panel PC User's Manual (W555)

Page 51

2 Hardware

2-5

SD Memory Card Slot

2-5 SD Memory Card Slot

The SD Memory Card slot on the Industrial Panel PC accepts SD Memory Cards with the following

specifications.

• SDHC type (SD 2.0 specification)

• Up to 32 GB capacity

Additional Information

Refer to 2-9-1 SD Memory Cards

on page 2 - 19 for SD Memory Card details.

NY-series Industrial Panel PC User's Manual (W555)

2 - 11

Page 52

2 Hardware

2-6

PCIe Card Slot

The PCI Express (PCIe) Card slot of the Industrial Panel PC accepts various PCIe Cards for specific

hardware needs.

The PCIe Card connectors are available behind the cover A and the PCIe Card is mounted in the

PCIe drawer B.

Additional Information

• Refer to 4-1-7 PCIe Card Specifications on page

• Refer to 5-2-2 Install the PCIe Card on page 5 - 9 for install information.

• Refer to 7-2-6 Replace the PCIe Card on page 7 - 25 for maintenance information.

4 - 10 for specifications.

2 - 12

NY-series Industrial Panel PC User's Manual (W555)

Page 53

2 Hardware

2-7

2-7-1

Connectors

This section gives an overview of the available connectors for the Industrial Panel PC.

2-7 Connectors

Power Connector

The power connector on the Panel PC is used to supply 24 VDC power to the Panel PC.

The power connector is supplied with the Panel PC.

2-7-1 Power Connector

2-7-2

Additional Information

• Refer to 4-2-1 Power Connector Specifications on page 4 - 12 for specifications. Refer to 5-4-3 Wire the Power Connector on page 5 - 34 for wiring details.

•

• Refer to 5-5 Connect on page 5 - 40 for connection details.

I/O Connector

The I/O connector on the Industrial Panel PC provides discrete signals with the following functions.

Input signal to the Panel PC when a connected UPS switches to battery power.

•

• Input signal to the Panel PC to perform a shutdown or power ON when the signal turns ON.

• Output signal from the Panel PC to indicate the power status of the Panel PC.

The I/O connector is supplied with the Panel PC.

NY-series Industrial Panel PC User's Manual (W555)

2 - 13

Page 54

2 Hardware

Additional Information

2-7-3

• Refer to 4-2-2 I/O Connector Specifications on page 4 - 13

• Refer to 5-4-4 Wire the I/O Connector on page 5 - 37 for wiring details.

• Refer to 5-5 Connect on page 5 - 40 for connection details.

for specifications.

USB Connectors

The USB connectors support USB 2.0 and USB 3.0 specifications.

All USB interfaces are protected against overcurrent and all ports support W

ake-on-USB.

2 - 14

Additional Information

• Refer to 4-2-3 USB Connector Specifications

• Refer to 5-5 Connect on page 5 - 40 for connection details.

on page 4 - 17 for specifications.

NY-series Industrial Panel PC User's Manual (W555)

Page 55

2 Hardware

2-7-4

Ethernet Connectors

The Ethernet connectors provide 3 individual Ethernet ports on the Industrial Panel PC.

Each port of

fers 10BASE-T/100BASE-TX/1000BASE-T Ethernet speeds.

Additional Information

2-7 Connectors

2-7-4 Ethernet Connectors

2-7-5

• Refer to 4-2-4 Ethernet Connector Specifications on page 4 - 18 for specifications.

•

Refer to 5-5 Connect on page 5 - 40 for connection details.

DVI Connector

The DVI interfaces supported on this connector are dependent on the configuration of the Industrial

Panel PC.

Additional Information

• Refer to 1-4 Product Configuration on page 1 - 5 for configuration details.

• Refer to 4-2-5 DVI Connector Specifications on page 4 - 19 for specifications.

• Refer to 5-5 Connect on page 5 - 40 for connection details.

NY-series Industrial Panel PC User's Manual (W555)

2 - 15

Page 56

2 Hardware

2-7-6

RS-232C Connector (Optional)

Depending on the product configuration an optional RS-232C connector is available.

Additional Information

• Refer to 1-4 Product Configuration on page 1 - 5 for configuration details.

• Refer to 4-2-7 RS-232C Connector Specifications on page 4 - 22 for specifications.

• Refer to 5-5 Connect on page 5 - 40 for connection details.

2-7-7

DVI-D Connector (Optional)

Depending on the product configuration an optional DVI-D connector is available. This interface only

supports digital video signals.

Additional Information

2 - 16

• Refer to 1-4 Product Configuration on page

• Refer to 4-2-6 DVI-D Connector Specifications on page 4 - 21 for specifications.

• Refer to 5-5 Connect on page 5 - 40 for connection details.

1 - 5 for configuration details.

NY-series Industrial Panel PC User's Manual (W555)

Page 57

2 Hardware

2-8

2-8-1

Spare Parts

The following spare parts for the Industrial Panel PC are available.

Battery

One battery is supplied with the Panel PC. The battery supplies power to the real-time clock.

The battery is located inside the Panel PC.

Model Appearance Specifications

CJ1W-BAT01

Additional Information

Refer to 7-2-4 Replace the Battery on page 7 - 18 for the replacement procedure.

Service life: 5 years at 25°C

2-8 Spare Parts

2-8-1 Battery

2-8-2

Fan Unit

The Fan Unit is available for the Panel PC that has active cooling.

Model Appearance Specifications

NY000-AF00

Additional Information

Refer to 7-2-3 Replace the Fan Unit on page 7 - 16

• Service life: 70,000 hours of continuous op-

eration at 40°C with 15% to 65% relative humidity

• Shelf life: 6 months

This is the storage limitation with no power supplied. W ance testing if the Fan Unit has been stored over 6 months.

for the replacement procedure.

e highly recommend perform-

NY-series Industrial Panel PC User's Manual (W555)

2 - 17

Page 58

2 Hardware

2-8-3

Accessory Kit

The accessory kit for the Panel PC.

Model Appearance Specifications

NY000-AK00 Accessory Kit containing all acces-

sories supplied with the

• Power connector

• I/O connector

• Drive bracket for drive installation

• 4 mounting screws for drive in-

stallation

• PCIe Card support for PCIe Card

installation

• PCIe Card clip for PCIe Card in-

stallation

Panel PC.

2 - 18

NY-series Industrial Panel PC User's Manual (W555)

Page 59

FZ-MEM2G

2 Hardware

2-9

2-9-1

2-9-2

Optional Hardware

The following optional hardware is available for the Industrial Panel PC.

SD Memory Cards

SD Memory Card details are provided below.

OMRON is not responsible for the operation, performance or write life of any other brand of SD Memo-

ry Card.

Model Appearance Card type Capacity Format

HMC-SD291

HMC-SD491 SDHC Card 4 GB FAT32

USB Flash Drives

USB Flash Drive details are provided below.

OMRON is not responsible for the operation, performance, or write life of any other brand of USB

Flash Drives.

SD Card 2 GB FAT16

2-9 Optional Hardware

2-9-1 SD Memory Cards

Model Appearance Capacity

FZ-MEM2G

FZ-MEM8G 8 GB

2 GB

NY-series Industrial Panel PC User's Manual (W555)

2 - 19

Page 60

2 Hardware

2-9-3

Storage Devices

Storage device details are provided below.

OMRON is not responsible for the operation, performance, or write life of any other storage device.

Model Appearance Storage type Capacity

NY000-AH00 HDD 320 GB

NY000-AS00 SSD SLC 32 GB

NY000-AS01 64 GB

NY000-AS02 SSD iMLC 128 GB

Additional Information

Refer to 4-1-6 Storage Device Specifications

on page 4 - 8 for storage device specifications.

Storage Device Considerations

For a storage device that is not an OMRON NY000-A£££ consider the following:

• OMRON is not responsible for the operation, performance or write life of any storage device other

than those supplied by OMRON.

• Test and measure the environmental performance of the intended storage device before actual op-

eration, using the SMART monitoring feature of the selected storage device.

• Ensure the temperature and vibrations of the storage device are within the operating temperature

specifications and vibration specifications during actual operation.

• Using a storage device with maximum power consumption exceeding 2W is not advised. Ensure

that the SMART monitor features of the storage device are used to detect overheating.

Additional Information

• Refer to 4-1-6 Storage Device Specifications on page 4 - 8 for storage device specifications.

• Refer to 4-5-1 Operation Environment Specifications on page 4 - 25 for environment specifications, specifically temperature and vibration specifications.

2 - 20

NY-series Industrial Panel PC User's Manual (W555)

Page 61

90 mm

60 mm

2 Hardware

2-9-4

DVI Cables

DVI cable details are provided below.

OMRON is not responsible for the operation or performance of any other brand of DVI cable.

Model Appearance Cable length Specifications

NY000AC00 2M

NY000AC00 5M

2 m

5 m

• Supports DVI-D

• Minimum bend radius: 36 mm

DVI Cable Clearance

The DVI cable requires a minimum clearance of 90 mm from the connector entry to prevent excessive

strain on the connector and cable assembly

2-9 Optional Hardware

2-9-4 DVI Cables

2-9-5

USB Type-A to USB Type-B Cables

USB Type-A to USB Type-B cable details are provided below.

OMRON is not responsible for the operation or performance of any other brand of USB T

Type-B cable.

Model Appearance Cable length Specifications

FH-VUAB 2M 2 m

FH-VUAB 5M 5 m

• USB 2.0

• Minimum bend radius: 25 mm

ype-A to USB

USB Type-A to USB Type-B Cable Clearance

The USB Type-A to USB Type-B cable requires a minimum clearance of 60 mm from the connector

entry to prevent excessive strain on the connector and cable assembly

NY-series Industrial Panel PC User's Manual (W555)

2 - 21

Page 62

2 Hardware

2-9-6

2-9-7

Industrial Monitor

Details for the recommended monitor are provided below.

OMRON is not responsible for the operation or performance of any other monitor

Model Appearance Specifications

NYM15W-C100£ NYM12W

-C100£

Additional Information

Refer to the OMRON website for specifications and manuals.

• LCD touchscreen

• Multi-touch functionality

• Supply voltage: 24 VDC

• Up to 1,280 x 800 pixels at 60 Hz

• 2 USB T

• Programmable brightness control

Power Supply

ype-A Connectors

Details for the recommended power supply are provided below.

OMRON is not responsible for the operation or performance of any other power supply

Model Appearance Specifications

S8VK-G£££24

Additional Information

• Refer to 4-1-3 Power Consumption Specifications on page tails.

• Refer to Note that the power consumption details of the ing of your power supply.

the OMRON website for specifications and manuals of the S8VK-G.

Panel PC determine the minimum power rat-

Output voltage: 24 VDC

4 - 3 for power consumption de-

2 - 22

NY-series Industrial Panel PC User's Manual (W555)

Page 63

2 Hardware

2-9-8

UPS

Details for the recommended UPS are provided below.

OMRON is not responsible for the operation or performance of any other UPS.

Model Appearance Specifications

S8BA with revision number 04 or

higher

*1. The revision number of the UPS can be retrieved from the serial number label on the product and the prod-

uct packaging.

Item Description

1 Product code

2 Product period and sequential number

3 Revision number

4 RoHS status

Output voltage during backup operation: 24 VDC±5%

2-9 Optional Hardware

2-9-8 UPS

2-9-9

Precautions for Safe Use

Use an Omron S8BA UPS with the correct revision number to prevent improper system shutdown.

Additional Information

• Refer to 2-9-7 Power Supply on page 2 - 22

for power supply details.

• Refer to 4-1-3 Power Consumption Specifications on page 4 - 3 for power consumption details.

• Refer to

the OMRON website for S8BA specifications or to the UPS S8BA User's Manual (Cat. No. U702) for the UPS manual. Note that the power consumption details determine the output current/capacity of your UPS.

UPS Communication Cable

Communication cable details are provided below.

OMRON is not responsible for the operation or performance of any other brand of communication ca-

ble.

Model Appearance Cable length Specifications

S8BW-C02

2 m Signals for

• Signal output (BL, TR, BU, WB)

• Remote ON/OFF input

• UPS Stop Signal input (BS)

NY-series Industrial Panel PC User's Manual (W555)

2 - 23

Page 64

2 Hardware

2 - 24

NY-series Industrial Panel PC User's Manual (W555)

Page 65

Software

This section provides software information for the Industrial Panel PC.

3-1

Windows Operating System........................................................................ 3 - 2

3-1-1 Determine Your Version of the Windows Operating Systems....................... 3 - 2

3-1-2 Determine Your Ethernet Ports ..................................................................... 3 - 3

3-2 Support Software .........................................................................................3 - 4

3-2-1 Overview IPC Support Software for Windows .............................................. 3 - 4

3-2-2 Installed IPC Support Software..................................................................... 3 - 4

3-2-3 Industrial PC Support Utility ......................................................................... 3 - 5

3-2-4 Industrial Monitor Utility ............................................................................... 3 - 9

3-2-5 Industrial Monitor Brightness Utility ........................................................... 3 - 12

3-2-6 Rescue Disk Creator................................................................................... 3 - 14

3-2-7 Industrial PC Tray Utility ............................................................................ 3 - 18

3-2-8 Power Attendant Lite Utility......................................................................... 3 - 21

3-3 Software for Developers............................................................................ 3 - 24

3-3-1 Overview IPC Developer Software for Windows ........................................ 3 - 24

3-3-2 Industrial PC System API .......................................................................... 3 - 25

3-3-3 Industrial Monitor API ................................................................................ 3 - 26

NY-series Industrial Panel PC User's Manual (W555)

3 - 1

Page 66

3 Software

3-1

3-1-1

Windows Operating System

This section provides an overview of Windows Operating System information.

Determine Your Version of the Windows Operating Systems

This section provides methods to find version details of your Windows Operating System.

Windows 7

To determine your version of the Windows Operating System:

1 Select the Start Button.

2 Enter System Information in the search box.

3 Select System Information in the pop-up that appears.

An overview of your System Information will appear

details.

, including the Windows Operating System

Windows 10

To determine your version of the Windows Operating System:

1 Select the Search Button.

2 Enter System Information in the search box.

3 Select System Information

An overview of your System Information will appear, including the Windows Operating System

details.

in the pop-up that appears.

3 - 2

NY-series Industrial Panel PC User's Manual (W555)

Page 67

3 Software

3-1-2

Determine Your Ethernet Ports

This section provides information to determine the relation between the physical Ethernet ports on

your Industrial Panel PC

and the ports in Windows.

Available Ethernet Ports

The Ethernet ports available are:

•

Port 1 - Local Area Connection - I218 (Intel® Ethernet Connection I218-LM)

• Port 2 - Local Area Connection 3 - I210 #2 (Intel® I210 Gigabit Ethernet Network Connection #2)

• Port 3 - Local Area Connection 2 - I210 (Intel® I210 Gigabit Ethernet Network Connection)

The following procedure provides information to determine the Ethernet ports on your Industrial Panel

PC.

Determine Ethernet Ports using Network Connections

To determine the Ethernet ports using computer management:

3-1 Windows Operating System

3-1-2 Determine Your Ethernet Ports

1 Select the Start Button.

2 Enter Network in the search box.

3 Select Network and Sharing Center in the pop-up that appears.

An overview of your basic network information and set up connections will appear

series of options in the left bar.

4 Select Change adapter settings in the left bar

An overview of your adapters will appear.

5 Determine the specific connector with the information in A

The adapter name and the connector ID are known.

vailable Ethernet Ports on page 3 - 3.

, including a

NY-series Industrial Panel PC User's Manual (W555)

3 - 3

Page 68

3 Software

3-2

3-2-1

Support Software

This section provides an overview of the support software available for your Industrial Panel PC.

Overview IPC Support Software for Windows

This section gives an overview of the software utilities available for all Industrial PC Platform products

with a Windows operating system.

Product Software utility

Industrial Monitor Industrial Monitor Utility

Industrial Monitor Brightness Utility Industrial PC T

Industrial Box PC Industrial PC Support Utility

Industrial PC T

Industrial Panel PC Industrial Monitor Utility

Industrial Monitor Brightness Utility Industrial PC Support Utility Industrial PC T

Select and download the utilities required from the OMRON download website.

ray Utility

3-2-2

Additional Information

• An internet connection is required to install support software.

•

Refer to NY-series Industrial Panel PC User’s Manual (Cat. No. W555) for support software details.

Installed IPC Support Software

This section gives an overview of the installed IPC support software available for your Industrial Panel

PC.

Product Specifications

Industrial PC Support Utility Refer to 3-2-3 Industrial PC Support Utility

3 - 5 for details.

Industrial PC Tray Utility Refer to 3-2-7 Industrial PC T

3 - 18 for details.

Industrial PC System API For the Industrial PC Support Utility.

Industrial Monitor API For the display and for an optional OMRON Industrial

Monitor.

congatec CGOS API For the Industrial PC System API.

Microsoft .NET Framework 4.6 For the Industrial PC Tray Utility.

Industrial Monitor Brightness Utility For the display and for an optional OMRON Industrial

Monitor.

Industrial Monitor Utility For the display and for an optional OMRON Industrial

Monitor.

ray Utility on page

on page

3 - 4

NY-series Industrial Panel PC User's Manual (W555)

Page 69

F E

3 Software

3-2-3

Industrial PC Support Utility

This section provides an overview of the Industrial PC Support Utility.

Industrial PC Support Utility Overview

The Industrial PC Support Utility is a software utility to assist in diagnosing and resolving problems of

the Industrial Panel PC

3-2 Support Software

3-2-3 Industrial PC Support Utility

Item Description Details

A Production Data Tab

B System Status Tab

C Tab details Details of the selected Tab page.

D Language Selector Select to display and choose the UI language of the Industrial PC Support

E Close Button Close the Industrial PC Support Utility.

F Update Screen Button Use this button to retrieve updated values from the Industrial Panel PC.

Select to display Production Data details in the Tab details area C. Refer to Production Data T

Select to display System Status details in the Tab details area Refer to System Status T

Utility.

ab on page 3 - 6 for details.

ab on page 3 - 7 for details.

NY-series Industrial Panel PC User's Manual (W555)

3 - 5

Page 70

3 Software

The Production Data tab displays generic Industrial Panel PC information. These are e.g. Model

name, Lot number

sions (Industrial PC Support Utility and Industrial PC System API).

Production Data Tab

, Serial number, Hardware version, BIOS version, BMC version, and software ver-

• Model Name is the configuration code of this model.

Refer to 1-4 Product Configuration

• BMC Version is the firmware version of the Board Management Controller.

Values are not updated automatically. Select the Update Screen Button to display the latest values.

on page 1 - 5 for details.

3 - 6

NY-series Industrial Panel PC User's Manual (W555)

Page 71

3 Software

System Status Tab

The System Status tab displays actual states and diagnostic information like internal temperature, fan

revolution, battery and power supply status.

A status that requires attention is indicated with a red bar

3-2 Support Software

3-2-3 Industrial PC Support Utility

Item Description

Internal Temperature

Fan Revolution

The average CPU temperature.

The actual rotation speed for each fan in revolutions per minute (r/min).

• First number = rotation speed of fan located closest to Power button.

Fan Status

• Second number = rotation speed of fan located closest to battery

The target speed for the fans is dynamically set based on the CPU temperature. The target speed is compared with the actual fan speed.

• OK indicates both fans are running on the target speed.

• Low revolution speed indicates one or both fans do not reach the target speed.

Clean the fans and replace the Fan Unit if the problem persists. Refer to 7-2-3 Replace the Fan Unit on page 7 - 16 for replacement details.

Battery Status The battery status.

• OK indicates the battery is full.

• Low indicates the battery voltage is low. Replace the battery.

Refer to 7-2-4 Replace the Battery on page 7 - 18 for replacement details.

Power Supply The power supply status is determined by the UPS and reported to the Panel PC via

the I/O connector.

• NormalPowerSupply indicates the Panel PC is powered by the 24V power supply.

• UPS Power Supply indicates that there is no power from the 24V power supply

and the Panel PC runs on battery power from the UPS.

*1.

Not for products NY512-A£ Refer to 1-4 Product Configuration on page

*2. The Fan Revolution will always show 0 (r/min) / 0 (r/min) for fanless models

1 - 5 for configuration details.

NY-series Industrial Panel PC User's Manual (W555)

3 - 7

Page 72

3 Software

Refer to 1-4 Product Configuration on page

*3. The Fan Status will always show OK for fanless models

Values are not updated automatically. Select the Update Screen Button to display the latest values.

1 - 5 for fan details.

Installation

The Industrial PC Support Utility is pre-installed on the Industrial Box PC and Industrial Panel PC.

Download the

quired.

Industrial PC Support Utility from the OMRON download website if reinstallation is re-

Startup

The Industrial PC Support Utility can be started from:

•

Windows Start Menu

Select OMRON and then Industrial PC Support Utility.

• Industrial PC Tray Utility

• Windows desktop shortcut

Logging

There is logging in the Windows event log of the following utilities:

Industrial Monitor Utility

•

In the Windows Event Viewer filter for event source IndMonService.

• Industrial Monitor Brightness Utility

In the Windows Event Viewer filter for event source IndMonService.

• Industrial PC Support Utility

In the Windows Event Viewer filter for event source IPCServiceHost or OMRON Industrial PC

Support Utility.

Additional Information

Refer to 7-2-9 W

indows Event Viewer on page 7 - 38 for the logged messages.

3 - 8

NY-series Industrial Panel PC User's Manual (W555)

Page 73

3 Software

3-2-4

Industrial Monitor Utility

This section provides an overview of the Industrial Monitor Utility.

Industrial Monitor Utility Overview

The Industrial Monitor Utility provides a user interface to control settings and display details of con-

nected Industrial Monitor

3-2 Support Software

3-2-4 Industrial Monitor Utility

Item Description Details

A Connected Monitors

B Product Information Provides the following details of the selected Industrial Monitor.

Shows a list of the connected Industrial Monitors.*1 Select one Monitor in the list to display the Monitor Details. When selected the LED Indicators of the selected monitor will flash during 3 seconds.

Industrial

• Serial Number

• Screen Size

• Hardware V

ersion

• Software Version

• Model Name

• Factory Identifier

• Unit Lot Number

• Logo Type

• Video Status

C Monitor Settings Provides several setting adjustments to control the operation of the selected

Industrial Monitor

D Backlight Brightness Ad-

justment

E Logo Brightness Adjust-

ment

F Status Brightness Adjust-

ment

G Advanced Settings Provides advanced setting adjustments to control the operation of the se-

H Restore Factory Defaults Restores the factory default settings of the selected Industrial Monitor.

Use the slider to control the brightness of the selected Industrial Monitor.

Use the slider to control the brightness of the Logo LED. Refer to Logo LED on page 2 - 8 for details about the Logo LED.

Use the slider to control the brightness of the Status LED Indicator on the

monitor Refer to Status LED Indicator on page 2 - 8 for details about the operation of the Status LED Indicator.

Industrial Monitor.

lected

NY-series Industrial Panel PC User's Manual (W555)

3 - 9

Page 74

3 Software

*1. The Industrial Monitor Utility scans the connected USB devices and shows a list of connected monitors. If an

*2. With a very low backlight brightness setting (15%-0%) the displayed information might not be visible in an envi-

Item Description Details

I OK button Applies the changes and closes the window

J Cancel button Exits the utility

K Apply button Applies the changes

Industrial Monitor

ronment with high ambient light conditions. This prevents brightness adjustments with the Industrial Monitor Utility.

Additional Information

To adjust the backlight brightness when the brightness setting is set too low:

• Bring the Panel PC

• Lighten the display with a bright flashlight

is not connected with the USB cable, it will not be found.

in a low ambient light environment

Installation

The Industrial Monitor Utility is pre-installed on the Industrial Box PC and the Industrial Panel PC.

Download the

stallation on another Industrial PC.

The Industrial Monitor Utility is installed onto Windows, and can be accessed via the Windows start

menu and the Industrial PC Tray Utility. Installing the Industrial Monitor Utility will also install the Indus-

trial PC Tray Utility.

Additional Information

Refer to 3-2-7 Industrial PC T

Industrial Monitor Utility from the OMRON download website for re-installation or for in-

ray Utility on page 3 - 18 for Industrial PC Tray Utility details.

Compatibility

This monitor utility can be used on any PC that is connected to an OMRON Industrial Monitor.

This monitor utility can be used with:

Windows Embedded Standard 7

•

• Windows 10

3 - 10

Additional Information

This monitor utility does not support 3rd party monitors.

Startup

The Industrial Monitor Utility can be started from:

Windows Start Menu.

•

Select Omron and then Industrial Monitor Utility.

• Industrial PC Tray Utility

NY-series Industrial Panel PC User's Manual (W555)

Page 75

3 Software

Configuration

The Industrial Monitor Utility can be configured with following options:

Configuration item Description

Language Follows the Windows language configuration when that language is supported for the

Industrial Monitor Utility guage configured in Windows is not supported.

Monitor identification If enabled, the Status LED indicator on the selected Industrial Monitor will flash for 3

seconds.

o enable:

(1) Open the Windows registry key HKEY_LOCAL_MACHINE\SOFTWARE

\Wow6432Node\Omron\IPC\MonitorConfiguration

(2) Set the registry value Indicate to value True.

. The default language English (EN-US) will be used if the lan-

3-2 Support Software

Messages

The Industrial Monitor Utility can use the Industrial PC Tray Utility to display following messages:

Message type Message Description

Info Connected A new monitor connected

• USB cable connected

• Monitor powered ON

Warning Not Connected Monitor disconnected

• USB cable disconnected

• Monitor powered OFF

Warning Video Discon-

nected

Warning No Signal DVI cable connected but no signal detected

DVI cable disconnected or NY Monitor Link cable disconnected

Logging

There is logging in the Windows event log of the following utilities:

• Industrial Monitor Utility

In the Windows Event Viewer filter for event source IndMonService.

• Industrial Monitor Brightness Utility

In the Windows Event Viewer filter for event source IndMonService.

• Industrial PC Support Utility

In the Windows Event Viewer filter for event source IPCServiceHost or OMRON Industrial PC

Support Utility.

3-2-4 Industrial Monitor Utility

Additional Information

Refer to 7-2-9 Windows Event Viewer on page 7 - 38 for the logged messages.

NY-series Industrial Panel PC User's Manual (W555)

3 - 11

Page 76

3 Software

3-2-5

Industrial Monitor Brightness Utility

This section provides an overview of the Industrial Monitor Brightness Utility.

Industrial Monitor Brightness Utility

The Industrial Monitor Brightness Utility is a software utility that allows you to control the brightness of

the screen backlight of all connected

Industrial Monitors.

Item Description Details

A Backlight brightness slider Use the slider to control the display brightness of all connected Industrial

Monitors.

B Industrial Monitor Utility Button to start the Industrial Monitor Utility.

With a very low backlight brightness setting (15%-0%) the displayed information might not be visible in

an environment with high ambient light conditions. This prevents brightness adjustments with the In-

dustrial Monitor Brightness Utility.

Additional Information

To adjust the backlight brightness when the brightness setting is set too low:

• Bring the Panel PC in a low ambient light environment

• Lighten the display with a bright flashlight

Compatibility

This monitor utility can be used on any PC that is connected to an OMRON Industrial Monitor.

This monitor utility can be used with:

• Windows Embedded Standard 7

• Windows 10

3 - 12

Additional Information

This monitor utility does not support 3rd party monitors.

NY-series Industrial Panel PC User's Manual (W555)

Page 77

3 Software

Installation

The Industrial Monitor Brightness Utility is pre-installed on the Industrial Box PC and the Industrial

Panel PC

Installation of the Industrial Monitor Brightness Utility is part of the installation of the Industrial Monitor

Utility.

Download the Industrial Monitor Utility from the OMRON download website for re-installation or for in-

stallation on another PC with Windows 7.

The Industrial Monitor Brightness Utility is installed onto Windows, and can be accessed via the Win-

dows start menu and the Industrial PC Tray Utility. Installing the Industrial Monitor Utility will also in-

stall the Industrial PC Tray Utility.

3-2 Support Software

Additional Information

Refer to 3-2-7 Industrial PC T

ray Utility on page 3 - 18 for Industrial PC Tray Utility details.

Startup

Start the Industrial Monitor Brightness Utility from the Industrial PC Tray Utility or from the Windows

Start Menu (select Omron and then Industrial Monitor Brightness Utility

Additional Information

Refer to 3-2-7 Industrial PC T

ray Utility on page 3 - 18 for Industrial PC Tray Utility details.

Configuration

Configuration is not required. This Industrial Monitor Brightness Utility will detect and support all con-

nected NY

-series Industrial Monitors.

Logging

3-2-5 Industrial Monitor Brightness Utility

There is logging in the Windows event log of the following utilities:

•

Industrial Monitor Utility

In the Windows Event Viewer filter for event source IndMonService.

• Industrial Monitor Brightness Utility

In the Windows Event Viewer filter for event source IndMonService.

• Industrial PC Support Utility

In the Windows Event Viewer filter for event source IPCServiceHost or OMRON Industrial PC

Support Utility.

Additional Information

Refer to 7-2-9 W

NY-series Industrial Panel PC User's Manual (W555)

indows Event Viewer on page 7 - 38 for the logged messages.

3 - 13

Page 78

3 Software

3-2-6

Rescue Disk Creator

This section provides an overview of the Rescue Disk Creator.

Rescue Disk Creator Overview

The Rescue Disk Creator creates a Rescue Disk.

A Rescue Disk is a disk with the

backup and system restore procedures.

Rescue Disk Utility; this is the software that performs the system

3 - 14

Item Description Details

A Explanation area Information about the utility and the backup.

In the right bottom corner messages are displayed when applicable.

B Target disk selection Selection of the disk that will become the Rescue Disk.

C Create Rescue Disk Button Start the Rescue Disk creation.

D Show non-removable disks Check the box to display not only the removable storage devices

but also the non-removable (internal) storage devices and USB Flash Drives and other USB storage devices.

E Creation progress bar Display the progress of the Rescue Disk creation.

F Close Button Close the Rescue Disk Creator.

Additional Information

• Refer to Create a System Backup with the Rescue Disk on page details.

• Refer to Restore a System Backup with the Rescue Disk on page 7 - 31 for system restore

7 - 7 for system backup

details.

NY-series Industrial Panel PC User's Manual (W555)

Page 79

Compatibility

This software utility can be used on PCs with Windows 7 and Windows 10.

3 Software

Installation

The Rescue Disk Creator is preinstalled.

Use the following procedure to reinstall the Rescue Disk Creator:

1 Use Windows Explorer to examine the local disk C.

2 Open the Rescue Disk folder (This PC\Local Disk(C:)\Program Files (x86)\OMRON\Industrial

PC\Rescue Disk) and activate the installer file setup.exe.

A progress bar will visualize the extraction process and then a language selection window

opens.

3 Select your language and then select OK.

The installer window opens.

4 Follow the installer steps to complete the Rescue Disk Creator installation.

The Rescue Disk Creator is installed and available in the OMRON folder in the Windows Start Menu.

3-2 Support Software

3-2-6 Rescue Disk Creator

Startup

To manually start the Rescue Disk Utility:

1 Locate the Rescue Disk Utility using the Windows Start menu or the Windows search box.

2 Use the option Run as administrator to activate the

NY-series Industrial Panel PC User's Manual (W555)

Rescue Disk Utility.

3 - 15

Page 80

3 Software

The Rescue Disk Utility started.

The Rescue Disk Creator can display the following messages:

Additional Information

The procedure to use Run as administrator is:

•

For Windows 10 using the Start menu: Rightclick the Rescue Disk Utility, select More and then Run as administrator.

• For Windows 10 using Search: Rightclick the Rescue Disk Utility in the search results and select Run as administrator.

• For Windows 7 using the Start menu or Search: Rightclick the Rescue Disk Utility and select Run as administrator.

Messages

Message

type

Error Creation progress: Failed to format the disk.

Reason:

Message Description

• Access denied

• Call canceled

• Call cancellation request too late

• Cluster size is beyond 32 bits

• Cluster size is too large

• Cluster size is too small

• Incompatible media in drive

• Invalid volume label

• Input/Output (I/O) error

• No media in drive

• Unable to quick format

• Unknown error

• Unsupported file system

• V

olume lock failed

• Volume is not mounted

• Volume is too large

• Volume is too small

• Volume write protected

Error Creation progress: Failed to copy image to

rescue disk. Reason:

• Unable to revoke access to the disk

• Unable to revoke access to the drive

• Disk write failed

• Unable to dismount the drive

• Invalid drive

• Unable to obtain exclusive access to the

drive

• The disk could not be accessed

• The drive could not be accessed

• Unable to revoke exclusive access to the

drive

The mentioned reason prevented formatting of the connected storage device. Ensure the connected storage device:

• Is not write protected or read-only

• Has a cluster size too small or more than

the maximum 32 bits

• Has a valid volume label

• Has suf

rescue disk utility and a full system backup

The mentioned reason prevented copying the image to the connected storage device. Ensure the connected storage device:

ficient storage capacity to store the

• Is not used by other programs

• Is not write protected or read-only

3 - 16

To solve an error:

NY-series Industrial Panel PC User's Manual (W555)

Page 81

3 Software

(1) Check that the correct target disk was selected.

(2) Check that the target disk has sufficient storage capacity to store the rescue disk utility and a full

system backup

(3) If the storage device is removable, check that it is inserted properly and is of the correct type.

(4) Check whether the storage device is write protected. SD Memory Cards often have a small me-

chanical write protection switch on them.

(5) Check that the user has the necessary access rights for the target disk.

(6) Check that the Rescue Disk Creator is running "As Administrator".

(7) Check that no other applications are using the target disk.

(8) Retry the operation with the same target disk.

(9) Retry the operation with a different target disk.

(10) Restart the IPC and then retry the operation.

(11) If the issue persists, contact your OMRON representative.

3-2 Support Software

3-2-6 Rescue Disk Creator

NY-series Industrial Panel PC User's Manual (W555)

3 - 17

Page 82

A B

3 Software

3-2-7

Industrial PC Tray Utility

This section provides an overview of the Industrial PC Tray Utility.

Industrial PC Tray Utility Overview

The Industrial PC Tray Utility is a software utility that provides information about the current state of

the Industrial PC, its related devices, and associated software.

When running, the

area

Windows 10

of Windows.

Industrial PC Tray Utility is always present as a status icon

in the system tray

Features

The Industrial PC Tray Utility provides the following features:

•

Display the overall state of all installed OMRON utilities in the icon in the system tray area.

• Display a menu that can start all installed utilities and show the state of each installed utility.

• Display notification messages in popup windows that inform the user about the state of applications

or hardware. The Industrial PC Tray Utility displays the messages provided by installed OMRON

utilities. Refer to the OMRON utilities information for the messages that can be displayed.

Select the Industrial PC Tray Utility icon F to display the menu.

3 - 18

• The application displays the available utilities.

•

Select an entry to launch the associated utility, if applicable.

NY-series Industrial Panel PC User's Manual (W555)

Page 83

3 Software

• The icons of menu items in the Industrial PC Tray Utility menu will have a warning or error symbol

when applicable.

•

The Industrial PC Support Utility

•

The Industrial Monitor Utility

The Industrial Monitor Brightness Utility

•

The application area can be configured to show and launch both OMRON and third party utilities.

•

• The About entry

Refer to About the Industrial PC T

• The Exit entry

shows details of the Industrial PC Tray Utility.

closes the utility.

is available in the menu when installed.

ray Utility on page 3 - 19 for details.

About the Industrial PC Tray Utility

The About window shows the version of the Industrial PC Tray Utility and copyright information.

3-2 Support Software

3-2-7 Industrial PC Tray Utility

Status Indicators on Icons

The following table provides the indicator details of the Industrial PC Tray Utility.

Overlay type Icon Description

None No OMRON utility has issued warning or error notifications.

Warning sign At least one OMRON utility has issued a warning notification.

Error sign At least one OMRON utility has issued an error notification.

Compatibility

This software utility can be used on PCs with Windows 7 and Windows 10.

NY-series Industrial Panel PC User's Manual (W555)

3 - 19

Page 84

3 Software

The Industrial PC Tray Utility is pre-installed on an Industrial Box PC and an Industrial Panel PC.

The Industrial PC T

trial Monitor Utility. Install the Industrial PC Support Utility or Industrial Monitor Utility to install the In-

dustrial PC Tray Utility.

By default the Industrial PC Tray Utility is configured to start automatically at Windows startup.

Installation

ray Utility is included in the installers of the Industrial PC Support Utility and Indus-

Startup

o manually start the Industrial PC Tray Utility:

1 Locate the Industrial PC Tray Utility using the Windows Start menu or the Windows search

box.

2 Use the option Run as administrator to activate the Industrial PC T

Additional Information

The procedure to use Run as administrator is:

For Windows 10 using the Start menu:

• Rightclick the Industrial PC Tray Utility, select More and then Run as administrator.

• For Windows 10 using Search: Rightclick the Industrial PC Tray Utility in the search results and select Run as administrator.

• For Windows 7 using the Start menu or Search: Rightclick the Industrial PC Tray Utility and select Run as administrator.

The Industrial PC Tray Utility started.

ray Utility.

3 - 20

NY-series Industrial Panel PC User's Manual (W555)

Page 85

3 Software

3-2-8

Power Attendant Lite Utility

This section provides an overview of the Power Attendant Lite Utility (PAL).

Power Attendant Lite Utility Overview

The Power Attendant Lite Utility is a software utility that constantly monitors the status of the UPS that

is connected to the Panel PC

When the Power Attendant Lite Utility discovers a power interruption it will send a signal to the Panel

PC to shut down.

The manual UPS Power Attendant Lite for Windows User's Manual is available.

Features

The Power Attendant Lite Utility provides the following features:

•

Signal the Panel PC to shut down when a power interruption is detected.

• Configure the shutdown conditions when a power interruption is detected.

• Display the state of the connected UPS using the icon in the system tray area.

Icon Description

Normal operation

3-2 Support Software

3-2-8 Power Attendant Lite Utility

Power Attendant Lite service stopped

UPS is supplying power from the internal battery

Communication error

Compatibility

The Power Attendant Lite Utility can be used on a Panel PC with one of the following operating sys-

tems:

•

Windows 10

• Windows 7

Installation

The Power Attendant Lite Utility is not pre-installed on a Panel PC.

The Power Attendant Lite Utility

lers). Download the installer from the OMRON download website if required.

installer is included in the installers directory (D:/OMRON-NY/Instal-

To install the Power Attendant Lite Utility:

NY-series Industrial Panel PC User's Manual (W555)

3 - 21

Page 86

3 Software

The Power Attendant Lite Utility

Configure the Power Attendant Lite Utility before using the Panel PC with a UPS connected using

USB.

1 Ensure the revision number of the UPS is correct.

Refer to 2-9-8 UPS on page

2 - 23 for details.

2 Ensure the UPS is connected to the Panel PC with a USB cable.

Refer to 5-8-1

Connect UPS Using the USB Connector on page 5 - 52 for details.

3 Open the Power Attendant Lite Utility installer folder and activate the installer file setup.exe.

4 Follow the installer steps to complete the installation.

is installed.

Configuration

o configure the Power Attendant Lite Utility:

1 Activate the icon of the Power Attendant Lite Utility to start the software.

A UPS selection window will be displayed.

2 Select the connected UPS.

A Login window will be displayed.

3 Login with ID Admin and password omron.

op window with UPS status information will be displayed.

The T

3 - 22

4 Configure the parameters for your specific situation.

NY-series Industrial Panel PC User's Manual (W555)

Page 87

3 Software

3-2 Support Software

Refer to UPS Power Attendant Lite for W

indows User's Manual for details.

5 Select Detailed Setting / Other Settings / Communication Setting / UPS Communication

to display the parameter COM search to UPS detection.

Port

6 Set the parameter to Do not search for COM ports to prevent interference for the COM ports.

7 Select Submit

to save the setting.

8 Select the close button in the right top corner to exit the Power Attendant Lite Utility software.

9 Select the restart behavior of the Panel PC with the Bios Boot Menu parameter Power Loss

Control.

Set this parameter to Turn On to restart automatically after a power down from the Power At-

tendant Lite Utility.

Refer to the Bios Boot Menu information for details.

10 Test the UPS shutdown behavior.

(1) Start the Panel PC

(2) Start applications

3-2-8 Power Attendant Lite Utility

(3) Create a power interruption

(4) Monitor the shutdown sequence and confirm a correct shutdown

When the shutdown sequence is not correct change parameters in the

Lite Utility software and test the UPS shutdown behavior again.

The Power Attendant Lite Utility is configured.

The Panel PC will shut down properly in case of a power supply interruption and restart automatically

when the power is restored.

NY-series Industrial Panel PC User's Manual (W555)

Power Attendant

3 - 23

Page 88

3 Software

3-3

3-3-1

Software for Developers

This section provides information on the software that is available for developers.

Overview IPC Developer Software for Windows

This section gives an overview of the software available for developers for all Industrial PC Platform

products with a Windows operating system.

Product Developer software

Industrial Monitor Industrial Monitor SDK

Industrial Monitor API

Industrial Box PC Industrial PC System SDK

Industrial PC System API

Industrial Panel PC Industrial Monitor SDK

Industrial Monitor API Industrial PC System SDK Industrial PC System API

Select and download the software required from the OMRON download website.

3 - 24

NY-series Industrial Panel PC User's Manual (W555)

Page 89

3 Software

3-3-2

Industrial PC System API

This section describes some of the Industrial PC System API functions.

The Industrial PC System API allows programmers to create programs that can retrieve information or

set an indicator status of the product.

The API makes use of the included OMRON IPC System Service to manage the hardware.

Features

The Industrial PC System API can:

•

Retrieve product information from the Industrial PC

• Retrieve system flags

• Retrieve maintenance information

• Configure and program the Watchdog

• Set the status of the Run LED Indicator and the ERR LED Indicator

*1 Only for

• Industrial Box PCs with a Windows operating system.

These are:

• NYB££-££1££

• NYB££-££2££

• NYB££-££3££

• Industrial Panel PCs with a Windows operating system.

These are:

• NYP££-££1££-££££££££

• NYP££-££2££-££££££££

• NYP££-££3££-££££££££

3-3 Software for Developers

3-3-2 Industrial PC System API

Installation

The Industrial PC System API is part of the SDK download.

The Industrial PC System API is pre-installed on the

Install the Industrial PC System SDK to use the Industrial PC System API on development PCs.

Use the Merge Module to include the Industrial PC System API in the installer for custom applications.

To use the Industrial PC System API the API needs to be referenced in your development project.

Industrial Panel PC and the Industrial Box PC.

NY-series Industrial Panel PC User's Manual (W555)

3 - 25

Page 90

3 Software

3-3-3

Industrial Monitor API

This section describes some of the Industrial Monitor API functions.

The Industrial Monitor API

features and retrieve information from connected Industrial Monitors.

The main function of the Industrial Monitor API is to enable the brightness of the backlight and the

LEDs of the monitor to be increased or decreased according to the working environment.

The API makes use of the included OMRON Industrial Monitor Service to manage the hardware.

allows programmers to create applications that can control the hardware

Features

For all connected Industrial Monitors, the Industrial Monitor API can:

•

Retrieve product information from the Industrial Monitor or Industrial Panel PC display

• Retrieve product status information

• Set the brightness of the Status LED indicator

• Set the brightness of the backlight

• Set the brightness of the Logo LED

• Set the touch points of the monitor

• Store settings

• Restore to factory defaults

The API makes use of the included Industrial Monitor Service to manage all Industrial Monitors con-

nected via USB.

Installation

The Industrial Monitor API is part of the SDK download.

The Industrial Monitor API

Install the Industrial Monitor SDK to use the Industrial Monitor API on development PCs.

Use the Merge Module to include the Industrial Monitor API in the installer for custom applications.

To use the Industrial Monitor API the API needs to be referenced in your development project.

is pre-installed on the Industrial Panel PC and Industrial Box PC.

3 - 26

NY-series Industrial Panel PC User's Manual (W555)

Page 91

Specifications

This section provides specifications of the Industrial Panel PC.

4-1

General Specifications ............................................................................... 4 - 2

4-1-1 Dimensions and Weight................................................................................ 4 - 2

4-1-2 General Electrical Specifications .................................................................. 4 - 3

4-1-3 Power Consumption Specifications .............................................................. 4 - 3

4-1-4 CPU Specifications ....................................................................................... 4 - 6

4-1-5 Memory Specifications.................................................................................. 4 - 7

4-1-6 Storage Device Specifications ...................................................................... 4 - 8

4-1-7 PCIe Card Specifications............................................................................ 4 - 10

4-2 Connector Specifications ......................................................................... 4 - 12

4-2-1 Power Connector Specifications................................................................. 4 - 12

4-2-2 I/O Connector Specifications ...................................................................... 4 - 13

4-2-3 USB Connector Specifications.................................................................... 4 - 17

4-2-4 Ethernet Connector Specifications ............................................................. 4 - 18

4-2-5 DVI Connector Specifications ..................................................................... 4 - 19

4-2-6 DVI-D Connector Specifications ................................................................. 4 - 21

4-2-7 RS-232C Connector Specifications ............................................................ 4 - 22

4-3 Software Specifications ............................................................................ 4 - 23

4-3-1 Available Windows Operating Systems ...................................................... 4 - 23

4-3-2 Supported Languages ................................................................................ 4 - 23

4-4 Display Specifications ...............................................................................4 - 24

4-5 Environmental Specifications................................................................... 4 - 25

4-5-1 Operation Environment Specifications........................................................ 4 - 25

4-5-2 Temperature and Humidity Specifications .................................................. 4 - 26

4-5-3 Recycling Specifications ............................................................................. 4 - 30

NY-series Industrial Panel PC User's Manual (W555)

4 - 1

Page 92

4 Specifications

4-1

4-1-1

General Specifications

This section provides general specifications of the Industrial Panel PC.

Dimensions and Weight

The following table provides specification details on dimensions and weights.

Item

Dimensions Width X = 332 mm

Height Y = 234 mm Depth Z = 121 mm

Monitor thickness in front of panel Rim thickness R = 8.0 mm

Weight 6.1 kg 7.2 kg

*1. Refer to 1-4 Product Configuration on page

12.1 Inch

1 - 5 for product configuration details.

Model Specifications

15.4 Inch

Width X = 401 mm Height Y = 277 mm Depth Z = 121 mm

4 - 2

NY-series Industrial Panel PC User's Manual (W555)

Page 93

4 Specifications

4-1-2

General Electrical Specifications

The following table provides the general electrical specifications.

Item Specifications

Rated power supply voltage 24 VDC

Allowable power supply voltage range 20.4 to 28.8 VDC

Power supply standard SELV

Grounding method Ground to less than 100 Ω

Inrush current At 24 VDC: 12 A / 6 ms max. for cold start at room

temperature

Overvoltage category JIS B3502 and IEC 61131-2: Category II

EMC immunity level IEC 61132-2: Zone B

RTC accuracy At ambient temperature of 55°C: −3.5 to +0.5 min error

per month At ambient temperature of 25°C: −1.5 to +1.5 min error per month At ambient temperature of 0°C: −3 to +1 min error per month

Power button life 100,000 operations

Fan life 8 years of continuous operation at 40°C

Battery life 5 years at 25°C (for battery CJ1W-BAT01)

4-1 General Specifications

4-1-2 General Electrical Specifications

4-1-3

Power Consumption Specifications

The following tables provide details on the power consumption of the Industrial Panel PC.

The total power consumption is the sum of the power consumption of all items that are installed in

your Panel PC.

Additional Information

Refer to 1-4 Product Configuration on page 1 - 5 for details.

Power Consumption with an Intel® Core™ i7-4700EQ CPU

Power consumption specifications for an Industrial Panel PC with an Intel® Core™ i7-4700EQ

Item

Industrial Panel PC with an Intel® Core™ i7-4700EQ excluding Drives and Expansions.

Drives

Expansions

*1. Refer to 1-4 Product Configuration on page *2. Refer to the documentation of your expansions for their power consumption details.

HDD 320 GB 2 W

SSD SLC 32 GB

SSD SLC 64 GB

SSD iMLC 128 GB

USB 14 W max. ((2 x 500 mA at 5 VDC) + (2 x 900 mA at 5

PCIe 15 W max.

1 - 5 for product configuration details.

12.1 Inch models

99 W 99 W

VDC))

Power consumption

15.4 Inch models

CPU.

NY-series Industrial Panel PC User's Manual (W555)

4 - 3

Page 94

4 Specifications

The total power consumption is the sum of the power consumption of all items that are installed in

your Industrial Panel PC

The required supply specifications for a Panel PC with an Intel® Core™ i7-4700EQ CPU.

Power supply Refer to 2-9-7 Power Supply on page supply products.

UPS Refer to 2-9-8 UPS on page

Power Consumption with an Intel® Core™ i5-4300U CPU

Power consumption specifications for an Industrial Panel PC with an Intel® Core™ i5-4300U CPU.

Item Minimum power requirements

240 W

2 - 22 for power

240 W

2 - 23 for UPS products.

Item

Industrial Panel PC with an Intel® Core™ i5-4300U cluding Drives and Expansions.

Drives

Expansions

*1. Refer to 1-4 Product Configuration on page *2. Refer to the documentation of your expansions for their power consumption details.

HDD 320 GB 2 W

SSD SLC 32 GB

SSD SLC 64 GB

SSD iMLC 128 GB

USB 14 W max. ((2 x 500 mA at 5 VDC) + (2 x 900 mA at 5

PCIe 5 W max.

ex-

1 - 5 for product configuration details.

12.1 Inch models

70 W 70 W

VDC))

Power consumption

15.4 Inch models

The total power consumption is the sum of the power consumption of all items that are installed in

your

Industrial Panel PC.

The required supply specifications for a Panel PC with an Intel® Core™ i5-4300U CPU.

Item Minimum power requirements

Power supply Refer to 2-9-7 Power Supply on page supply products.

UPS Refer to 2-9-8 UPS on page

2 - 23 for UPS products.

2 - 22 for power

120 W

4 - 4

Power Consumption with an Intel® Celeron®

2980U CPU

Power consumption specifications for an Industrial Panel PC with an Intel® Celeron® 2980U CPU.

Item

Industrial Panel PC with an Intel® Celeron® 2980U cluding Drives and Expansions.

12.1 Inch models

63 W 63 W

ex-

NY-series Industrial Panel PC User's Manual (W555)

Power consumption

15.4 Inch models

Page 95

4 Specifications

Item

Drives

Expansions

*1. Refer to 1-4 Product Configuration on page *2. Refer to the documentation of your expansions for their power consumption details.

HDD 320 GB 2 W

SSD SLC 32 GB

SSD SLC 64 GB

SSD iMLC 128 GB

USB 14 W max. ((2 x 500 mA at 5 VDC) + (2 x 900 mA at 5

PCIe 5 W max.

1 - 5 for product configuration details.

12.1 Inch models

VDC))

Power consumption

15.4 Inch models

The total power consumption is the sum of the power consumption of all items that are installed in

your

Industrial Panel PC.

The required supply specifications for a Panel PC with an Intel® Celeron® 2980U CPU.

Item Minimum power requirements

Power supply Refer to 2-9-7 Power Supply on page supply products.

UPS Refer to 2-9-8 UPS on page

2 - 23 for UPS products.

2 - 22 for power

120 W

4-1 General Specifications

4-1-3 Power Consumption Specifications

NY-series Industrial Panel PC User's Manual (W555)

4 - 5

Page 96

4 Specifications

4-1-4

CPU Specifications

This section gives the specifications of the CPUs that are available for the Industrial Panel PC.

Refer to 1-4

Intel®

CPU specifications for Industrial Panel PCs with an Intel® Core™ i7-4700EQ

Cores / Threads 4 / 8

CPU base frequency 2.4 GHz

Maximum turbo frequency 3.4 GHz

Cache 6 MB

Cooling details Requires active cooling (fan)

Drive bays (HDD/SSD) 2

Graphics controller Intel ® HD Graphics 4600. Up to two independent

Product Configuration on page 1 - 5 for product configuration details.

Core™ i7-4700EQ CPU Specifications

CPU.

Item Specifications

screens.

Additional Information

Refer to A-1-3 BIOS - Advanced on page A - 5 for turbo frequency details.

Intel® Core™ i5-4300U

CPU specifications for Industrial Panel PCs with an Intel® Core™ i5-4300U

Item Specifications

Cores / Threads 2 / 4

CPU base frequency 1.9 GHz

Maximum turbo frequency 2.9 GHz

Cache 3 MB

Cooling details Passive cooling (fanless)

Drive bays (HDD/SSD) 2

Graphics controller Intel ® HD Graphics 4400. Up to two independent

Additional Information

Refer to A-1-3 BIOS - Advanced on page A - 5 for turbo frequency details.

CPU Specifications

CPU.

screens.

4 - 6

NY-series Industrial Panel PC User's Manual (W555)

Page 97

4 Specifications

4-1-5

Intel®

Celeron® 2980U CPU Specifications

CPU specifications for Industrial Panel PCs with an Intel® Celeron® 2980U CPU.

Item Specifications

Cores / Threads 2 / 2

CPU base frequency 1.6 GHz

Maximum turbo frequency ---

Cache 2 MB

Cooling details Passive cooling (fanless)

Drive bays (HDD/SSD) 1. Drive bay A.

Graphics controller Intel ® HD Graphics. Up to two independent screens.

Memory Specifications

The following table provides specification details of the memory.

Item

Memory type DDR3L

Package memory format SO-DIMM

Serial Presence Detect (SPD)

*1. Refer to 1-4 Product Configuration on page

Speed grade 1600 Mbps

CAS Latency CL11

1 - 5 for product configuration details.

2 GB

Model Specifications

4 GB

8 GB

4-1 General Specifications

4-1-5 Memory Specifications

Additional Information

The small outline dual in-line memory modules (SO-DIMM) cannot be added or replaced by users.

NY-series Industrial Panel PC User's Manual (W555)

4 - 7

Page 98

4 Specifications

4-1-6

Storage Device Specifications

This section provides the specifications of the storage devices.

Hard Disk Drive Specifications

Specifications for the Hard Disk Drive (HDD) are provided in the table below.

Item

Model NY000-AH00

S.M.A.R.T. support Yes

Rotation speed 5,400 r/min

Interface Serial ATA 3.0

Operating temperature

Operating humidity

5 to 55°C

• 10% to 95% (with no condensation)

• 29°C wet-bulb temperature max.

Storage temperature -40 to 65°C

Storage humidity

• 8% to 90% (with no condensation)

• 40°C wet-bulb temperature max.

Life Approximately 5 years or 20,000 powered-ON hours

(whichever comes first) under the following conditions:

• 25°C at 101.3 kPa

• Less than 333 powered-ON hours/month

• Less than 20% operation while powered-ON

• Less than 1.30 x 10

*1. Refer to 1-4 Product Configuration on page *2. Refer to 4-5-1 Operation Environment Specifications on page 4 - 25 for the temperature specifications of

the complete Panel PC *3. Powered-ON hours include sleep and standby modes. *4. Operation includes seeking, writing, and reading functions.

1 - 5 for product configuration details.

Model Specifications

320 GB

seeks/month

4 - 8

Solid State Drive Specifications

Specifications for the Solid State Drive (SSD) are provided in the table below.

Item

Model NY000-AS00 NY000-AS01 NY000-AS02

Type SLC SLC iMLC

S.M.A.R.T. support Yes

Interface Serial ATA 3.1

Sustained read speed Up to 160 MB/s Up to 430 MB/s

Sustained write speed Up to 150 MB/s Up to 190 MB/s

Operating temperature

Operating humidity 10% to 95% (with no condensation)

Storage temperature -40 to 100°C

Storage humidity 10% to 95% (with no condensation)

0 to 70°C

32 GB

Model Specifications

64 GB

NY-series Industrial Panel PC User's Manual (W555)

128 GB

Page 99

4 Specifications

Item

Life 1500 TB/11 years at a

daily workload of 350 GB

*1. Refer to 1-4 Product Configuration on page 1 - 5 for product configuration details. *2. Refer to 4-5-1 Operation Environment Specifications on page 4 - 25 for the temperature specifications of

the complete Panel PC

32 GB

Model Specifications

64 GB

3000 TB/23 years at a daily workload of 350 GB

128 GB

114 TB/3 years at a daily workload of 100 GB

4-1 General Specifications

4-1-6 Storage Device Specifications

NY-series Industrial Panel PC User's Manual (W555)

4 - 9

Page 100

4 Specifications

4-1-7

PCIe Card Specifications

The PCI Express (PCIe) Card slot of the Industrial Panel PC accepts various cards for specific hard-

ware needs.

Ensure that, according to the PCIe hardware specifications, the indent

The following tables provide PCIe Card details per CPU type.

is present in the PCIe Card.

PCIe Card Slot Specifications with an Intel® Core™ i7-4700EQ CPU

The table below provides PCIe Card slot details for Industrial Panel PCs with an Intel® Core

i7-4700EQ CPU.

Item Specifications

Configuration X4 (4 lanes) up to Gen 3

Card height

Card length Half-length cards, 6.6 inches (167.65 mm)

Power consumption

*1. Low profile cards, 2.536 inches (64.4 mm) are not supported.

Standard height cards, 4.20 inches (106.7 mm)

Refer to Power Consumption with an for the maximum power consumption

Intel® Core™ i7-4700EQ CPU on page 4 - 3

™

PCIe Card Slot Specifications with an Intel® Core™ i5-4300U CPU

The table below provides PCIe Card slot details for Industrial Panel PCs with an Intel® Core

i5-4300U

Configuration X1 (1 lane) up to Gen 2

Card height

Card length Half-length cards, 6.6 inches (167.65 mm)

Power consumption

*1. Low profile cards, 2.536 inches (64.4 mm) are not supported.

CPU.

Item Specifications

Standard height cards, 4.20 inches (106.7 mm)

Refer to Power Consumption with an the maximum power consumption

Intel® Core™ i5-4300U CPU on page 4 - 4 for

™

4 - 10

NY-series Industrial Panel PC User's Manual (W555)

Omron NYP25-*-12 SERIES, NYP17-*-13 SERIES, NYP1C-*-12 SERIES, NYP25-*-13 SERIES, NYP1C-*-11 SERIES User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Introduction

Intended Audience

Applicable Products

CONTENTS

Manual Information

Page Structure

Special Information

Terms and Conditions Agreement

Warranty and Limitations of Liability

Application Considerations

Disclaimers

Safety Precautions

Definition of Precautionary Information

Symbols

Warnings

Cautions

Precautions for Safe Use

Disassembly, Dropping, Mounting, Installation and Storage

Wiring

Power Supply Design and Turning ON/OFF the Power Supply

Actual Operation

Operation

General Communications

Battery Replacement

Cleaning, Maintenance and Disposal

Precautions for Correct Use

Storage, Installation and Mounting

Wiring

Actual Operation and Operation

Battery Replacement

SD Memory Cards

Cleaning and Maintenance

Regulations and Standards

Conformance to EU Directives

Conformance to KC Standards

Conformance to UL and CSA Standards

Software Licenses and Copyrights

Related Manuals

Related Products Manuals

Industrial Monitor Manual

Terminology and Abbreviations

Industrial PC Platform

Hardware

Software

Revision History

Sections in this Manual

Intended Use

1-2 Hardware Features

ID Information Label

1-4 Product Configuration

Industrial PC Platform Overview

Industrial Monitor

1-5-2 Industrial Box PC

Industrial Panel PC

Component Names and Functions

Front and Top of the Industrial Panel PC

2-1-2 Back and Bottom of the Industrial Panel PC

2-2 LED Indicators

2-2-1 Bottom LED Indicators

2-2-2 Front LED and LED Indicator

2-3 Power Button

Drive Bays

2-5 SD Memory Card Slot

PCIe Card Slot

2-7 Connectors

2-7-1 Power Connector

I/O Connector

USB Connectors

2-7-4 Ethernet Connectors

DVI Connector

RS-232C Connector (Optional)

DVI-D Connector (Optional)

2-8 Spare Parts

2-8-1 Battery

Fan Unit

Accessory Kit

Omron NYP25--12 SERIES, NYP17--13 SERIES, NYP1C--12 SERIES, NYP25--13 SERIES, NYP1C-*-11 SERIES User Manual